Danfoss MBS 8200 Pressure Transmitters Installation Guide
- August 17, 2024
- Danfoss
Table of Contents
Danfoss MBS 8200 Pressure Transmitters
Product Specifications
- Model: MBS 8200 and MBS 8250
- Connector: M12 x 1, 4-pin Metal Round Packard
- Connector Types: AMP Econoseal J series, AMP Junior power timer
- Cable Type: Flying leads, 125 mm with AMP super seal 1.5 series
- Approval: American and Canadian approvals
- Power Supply Requirement: Must be powered by a Class 2 power supply
- Temperature Code: T4
Product Usage Instructions
Installation Guide
- Ensure the power supply meets the Class 2 requirements for safe operation.
- Connect the pressure transmitter using the specified connectors.
- Follow the wiring diagram provided in the manual for correct installation.
Power Supply Requirements
The pressure transmitters MBS 8200 and MBS 8250 must be powered by a Class 2 power supply to ensure safe operation and compliance with American and Canadian approvals.
Ambient Temperature
The maximum ambient temperature for these transmitters is determined by the T4 temperature code. Ensure that the operating environment does not exceed this temperature to prevent damage to the equipment.
FAQ
- Q: What are the approval requirements for the MBS 8200 and MBS 8250?
- A: The transmitters must be powered by a Class 2 power supply \and comply with industrial control equipment, temperature indicating equipment, and Class I, Div. 2 standards according to UL certifications.
- Q: How should I connect the pressure transmitter?
- A: Use the specified connectors (M12 x 1, 4-pin Metal Round Packard) and follow the installation guide provided in the manual for proper wiring.
Electrical connection
American and Canadian approvals:
Must be powered by a Class 2 power supply
- Industrial control equipment acc. to UL 508, file no. E31 1982
- Temperature indicating equipment acc. to UL 873, file no. E31024
- Class I, Div. 2, Group A, B, C and D acc. to UL 1604, file no. E227388
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>