Danfoss VLT FCM 300 Motor With Frequency Converter Instructions
- August 17, 2024
- Danfoss
Table of Contents
Danfoss VLT FCM 300 Motor With Frequency Converter
Specifications
- Model: FCM 300
- Language Options: English, Deutsch, Dansk
- Trademark: VLT (Danfoss)
Product Usage Instructions
Setting Up Motor Data in FCP Spare Parts
When installing a FCP (Frequency Converter Part) spare part, follow the steps below:
Parameter 147 Setup
- Access parameter 147 for setting up the motor type.
- Value: Depends on the unit being used.
Function
This is where you select the specific motor at which the spare part unit is to be installed.
Important Notes
- This parameter is only changeable in spare part units.
- Check the software version number in parameter 624 before making changes.
- If software version = 2.61:
- After changing parameter 147, set parameter 620 to initialize [3], then power off and on again.
- If software version > 2.61:
- After changing parameter 147, power off and on again.
Note: These actions will reset the frequency converter to factory settings (except for parameters 500, 501, and 600-605).
Instruction
Instruction on how to set up motor data in FCP spare parts
When Installing an FCP (frequency converter part) spare part, the motor type
in parameter 147 must be set up
Function
This is where to select the specific motor, at which the spare part unit is to be installed.
-
NB! :
This parameter will only be changeable in spare part units. -
NB!:
Please check the software version number in par. 624: If software version = 2.61:
After changing par. 147, please set par. 620 to initialize [3] and power off and on again. If software version > 2.61: After changing par. 147, please power off and on again
Please note that the above actions will reset the frequency converter to the factory setting (except for par. 500, 501, and 600-605).
Description of choice:
Select the choice of a motor according to motor brand, number of poles and
power size.
Example: ATB STD-4-075, means ATB 4 pole 0,75 kW motor
Danfoss can accept no responsibility for possible errors in catalogs, brochures, and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed. All trademarks in this material are the property of the respective companies. Danfoss and the Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>