Aqara H2 EU Wall Outlet User Manual
- August 16, 2024
- Aqara
Table of Contents
Aqara H2 EU Wall Outlet
Product Instruction
Wall Outlet H2 EU is a smart wall outlet product based on Zigbee protocol. The maximum Work current reaches 16A, and it can realize remote control, timing control, power metering, equipment group control and other socket intelligent functions. At the same time, it also supports access to platforms such as Apple Home, Google, Alexa, Yandex, IFTTT.
Installation introduction
Pre-installation instructions
- Please disconnect the main power switch at home before installation
- Please prepare a Phillips screwdriver before installation
- Please ensure that the depth of the socket box where the socket is installed is at least 50mm
Installation steps
- Remove the other sockets used first and mark the Live wire, Null wire and Ground wire in the wires in advance.
- Open the socket package and take out the socket H2 and screw accessories in the package.
- Use a cross screwdriver to loosen the screw in the center of socket H2, and remove the decorative cover, middle frame of socket H2 respectively.
- Connect the Live wire, Ground wire and Null wire to the L, ,N power interface on socket H2 in sequence, and tighten the fastening screws of the power interface.
- Use the screw accessories in the package to fix the socket to the screw hole post on the box.
- Install the middle frame and decorative cover in sequence, and fix the above components with screws to complete the installation.
Preparation Before Use
An Aqara Zigbee 3.0 hub is required (The distance between this product and
your hub should be within 30 m).
Device Binding & Initialization
-
Download the Aqara Home app.
Search for “Aqara Home” in the Apple App Store, Google Play, Xiaomi GetApps, Huawei App Gallery, or scan the following QR code to download the Aqara Home app: -
Add the product to the Aqara Home appPlease open the Aqara Home app, tap “Home” and then tap “+” in the top right corner to enter the
“Add Device (Accessory)” page. Select “Wall Outlet H2 EU” and the hub to be connected to, and add it according to instructions in the Aqara Home app. Alternatively, after resetting the device, click on the Wall Outlet H2 EU device pop-up on the Aqara Home app and follow the app prompts to bind and add it. Press and hold the RESET button for 5 seconds, and wait for Wait for the device indicator light to turn blue and flash.
For more detail about the product, please scan the QR code below to view the electronic version of the manual
Product Specifications
Wall Outlet H2 EU
Model : WP-P01D
Rating : 250V~, 16A, 50/60Hz (3,39 × 3,39 × 1.88 in.)
Operating Temperature: -10 °C ~ 40 °C (14 °F ~ 104 °F)
Operating Humidity: 0 ~ 95% RH, no condensation
What is in the Box: Wall Outlet H2 EU × 1, User Manual × 1, Screw Kit × 1
Wireless Protocols: Zigbee Dimensions: 86 × 86 × 47.7 mm
Warnings
- If you need to install the socket on other connecting frames, please try to use the built-in fixing screws in the packaging as much as possible
- Non professionals are not allowed to install or disassemble this product without authorization. Please ensure that the power supply is turned off when installing the product.
| Zigbee Operation Frequency | 2405-2480 MHz |
|---|---|
| Zigbee Maximum Output Power | ≤13dBm |
Under normal use of condition, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
EU Declaration of Conformity
Hereby, Lumi United Technology Co., Ltd declares that the radio equipment type
Wall Outlet H2 EU, WP-P01D is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following
internet address: https://www.aqara.com/DoC/
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic
equipment (WEEE as in directive 2012/19/EU) which should not be mixed with
unsorted household waste. Instead, you should protect human health and the
environment by handing over your waste equipment to a designated collection
point for the recycling of waste electrical and electronic equipment,
appointed by the government or local authorities. Correct disposal and
recycling will help prevent potential negative consequences to the environment
and human health. Please contact the installer or local authorities for more
information about the location as well as terms and conditions of such
collection points.
Manufacturer : Lumi United Technology Co., Ltd.
Address : Room 801-804, Building 1, Chongwen Park, Nanshan iPark, No.
3370, Liuxian Avenue, Fuguang Community, Taoyuan Residential District, Nanshan
District, Shenzhen, China
Online Customer Service:
www.aqara.com/support
Email : support@aqara.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>