Danfoss MI.50.K1.51 Micro Drive FC 51 Instructions
- August 16, 2024
- Danfoss
Table of Contents
Danfoss MI.50.K1.51 Micro Drive FC 51
Product Information
Specifications:
- Model : MI.50.K1.51 – VLT
- Trademark : Danfoss
- IP Ratings : Compact IP 20, Compact IP 54
Product Usage Instructions
Mounting Instructions:
Ensure to follow the specific mounting instructions for Bookstyle, Compact IP
20, and Compact IP 54 as detailed in the manual.
Installation Steps:
- Refer to the Contents section for detailed instructions on installation.
- For Compact IP 20, check for compatibility based on the series number provided. Contact Danfoss if needed.
- For Compact IP 54, verify compatibility based on the series number mentioned.
Warnings:
Attention: Be cautious while handling the product. Follow all safety
instructions provided.
Warning! The Memory Option Card as well as other electronic components within the VLT are susceptible to Electrostatic Discharge – ESD. Make sure that the option card remains in the ESD protective bag at all times during transportation and storage. Before you take the card out of the protective back for mounting, make sure that you are properly connected to common ground, for example by means of a groundconnected wristband, and that the same applies to the VLT. When the option card is out of the protective bag, you should only touch the rim, and never touch the electronic components, as they may suffer irreparable damage.
Bookstyle
- VLT® 5001-5006, 200/240 V
- VLT® 5001-5011, 380/500 V
Note:
- Before Series no. XXXX13GXXX: Limited compatibility. Contact Danfoss.
- Series no. XXXX13GXXX and higher: No limitations.
Memory option VLT® Series 5000
Compact IP 20
- VLT® 5001-5006, 200/240 V
- VLT® 5001-5011, 380/500 V
Note:
-
Before Series no. XXXX13GXXX: Limited compatibility. Contact Danfoss.
-
Series no. XXXX13GXXX and higher: No limitations.
-
VLT® 5008-5027, 200/240 V
-
VLT® 5016-5052, 380/500 V
Compact IP 54
-
VLT® 5001-5006, 200/240 V
-
VLT® 5001-5011, 380/500 V
-
VLT® 5008-5027, 200/240 V
-
VLT® 5016-5052, 380/500 V
Danfoss can accept no responsibility for possible errors in catalogs, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequential changes being necessary in specifications already agreed.
FAQ
Q: What should I do if I encounter compatibility issues with my series
number?
A: If you face compatibility problems with your series number, especially
for Compact IP 20 or Compact IP 54, contact Danfoss for assistance.
Q: Is there a warranty for the product?
A: Danfoss can accept no responsibility for possible errors in catalogs
or printed material. Contact Danfoss for information on warranties and product
alterations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>