wudor B0CLRG28LV H2 150w Solar Lights Outdoor User Manual
- June 17, 2024
- wudor
Table of Contents
wudor B0CLRG28LV H2 150w Solar Lights Outdoor
USER MANUAL
WHAT’S IN THE BOX
BETECTING LIGHT BEFORE INSTALLATION
Cover the solar panel and hold the switch by hand for 1-2 seconds to detect the light. If the light does not come on normally in this operation, please charge the solar outdoor light for 3-4 hours and then come back to test whether the light turns on normally or not.
INSTALLATION STEPS
- Align the holes of the light body with the holes of the pole, and use Phillips head screws to fix the pole and the light body.
- Select the location of the building and fix the solar light to the building with Phillips screws and inverted rubber tips.
REMOTE CONTROL BUTTONS
RECOMMENDED INSTALLATION HEIGHT
MOTION SENSOR
- 30% Brightness
- 100% Brightness
- 30% Brightness
Tip: The solar panel can work properly and the battery can be charged properly. The installation of solar street lights should be direct sunlight as more as possible, without being blocked by buildings or trees, and ensure the longest acceptable irradiation time. Only by correctly and scientifically installing solar street lights and it will have the best charging effect.
HOW TO RECEIVE SERVICE
To obtain After-sales service, contact our customer service team at Aaron_765@163.com