darkFlash DLT23 2 In 1 Multifunctional Stand Installation Guide
- October 30, 2023
- darkflash
Table of Contents
darkFlash DLT23 2 In 1 Multifunctional Stand
Product Introduction
Multifunctional 2 in 1 Stand: A multifunctional product with two kinds of stands.
- Phone stand: Phone and tablet can use simultaneously.
- Laptop stand: Designed for laptop, computer and tablet.
Special structural with patent design combine two independent products together, it can carry conveniently and have beautiful shapes 2 in 1 Multifunctional Stand is an absolutely comfortable and humanized product, can use different mobile device together anytime
Product Features
- Laptop stand, smart phone and tablet stand can use simultaneously or independently.
- The Smartphone stand has four height adjustable, and four-stage visual angle adjustment stands can put multiple smartphones and tablets.
- Laptop stand has six height adjustable angles, special design for cooling knobs can improve the stability, special patent design of NB holder in the middle won’t interfere typing makes it easy to operate the notebook computer, this product is suitable for different size of laptops and gives you the best comfortable experience.
- Foldable stand in a portable thin size for easy carry and travel.
Package Contents
DLT23 1SET
Storage bag 1PCS
User Manual 1 PCS
Product Specification
Application | For 10″~17″ laptop and all kinds of smartphones and tablets |
---|---|
Material | ABS plastic |
Speciflcation | 262 x 70 x 43.5mm |
Phone stand | 150x 70 x 15mm |
Laptop stand | 262x 70 x 32.5mm |
Smart Phone Stand
Laptop Stand
Operating Instructions
A. Split of the product:
- Take out product.
- Remove the mobile phone holder from the laptop holder by pressing the method A-C as shown in the flgure.
B. Combination of the product:
- Figure D: Snap the button hole on the bottom of the phone holder to the buckle of the laptop
- Figure E: Then push the phone holder to the end.
- Figure F: Completed to combine of the product
Operating Instruction-Phone Stand
- Figure G: Flip open the upper and lower cover from the groove of the phone stand.
- Figure H, I: Open the inner holder and adjust angle to a suitable and comfortable viewing angle to snap into the slot.
- Figure J: Open the holders and put on your smartphones and tablets.
- Figure K, L, M, N, 0: For various usage with all kinds of scenar
Operating Instruction-Laptop Stand
-
Pull out the stand to the left and right picture
-
Flip up and down at the grooves on the laptop stand on both sides. picture 2
-
Open the holders on the left and right side and take out the cooling knobs.
-
Put the angle adjustable into the groove (adjust freely according to required angle)
-
Put the cooling knobs into tracks and adjust to the best position that you need
-
Rotate the holder to maximum (90 degrees), and user can adjust the holder according to the thickness of laptop and press it to the best position.
Using Environment
-
Laptop
-
Tablet
-
Smartphones