sbs OWS Air Buds Instruction Manual
- August 18, 2024
- sbs
Table of Contents
sbs OWS Air Buds Instruction Manual
OWS EarBuds
Phone Calls & Music
SPECIFICATION
- Wireless: V 5.4 | Working Range: 10m
- Frequency: 20Hz-20kHz
- Battery: 200mAh | Earbud Battery: 40mAh
- Power Input: 5 V D.C. 1A max
- Impedance: 16Ω | Sensitivity: 104dB
- Charging Port: Type-C
- Playing Time: 4 hours
- Charging Time: 2 hours
- Standby Time: 90 hours
- ƒ: 2402 ÷ 2480 MHz
- PRF: 6 mW Max
Select the silicone headband in the most comfortable size for your ears.
Charging the earphones
IMPORTANT NOTICE
FULLY CHARGE THE HEADPHONES THE FIRST TIME THEY ARE USED
REMOVE THE PROTECTIVE STICKERS FROM THE CHARGING PINS
Insert the earphones into the charging case, the LEDs will light up red; when charging is complete, they will light up blue for 5 seconds and then switch off.
Charging the Case via Cable
Use the supplied Type C/USB-A cable to charge the case.
Insert the USB-A connector into a charging port and the Type C connector into the case port.
The LED will blink green and, when charging is complete, will remain steadily green.
Powering ON the earphones
Take the earphones out of the charging case, they will turn on and pair with
each other automatically.
The LED of one of the earphones will flash blue and red; or press the MLF
button of one of the earphones for 6 seconds.
Powering OFF the earphones
Insert the earphones into the charging case, they will turn off automatically; or press the MLF button of one of the earphones for 6 seconds.
Pairing to device
Remove the earphones from the charging case, the LED will light up and flash red and blue.
Open the Bluetooth settings of the device and select “SBS Air Buds”.
After the first pairing (if the Bluetooth® connection of the device is on) the
headsets will connect automatically
Reset
Press the MLF button on both headsets 5 times simultaneously
SBS spa – Via Circonvallazione s/n
28010 Miasino (No) – Italy
TEEARTWSAIRBUDSBT
Made in China
Read More About This Manual & Download PDF: