Jollypop AD-FW601 Smart LED Lights Bars User Manual
- June 6, 2024
- Jollypop
Table of Contents
User manuals
APP Download
The public version of the APP is now available on major app shops worldwide. Search for “Tuya Smart” or “Smart Life in the app shops or scan the QR code below to download.
https://smartapp.tuya.com/smartlife
Guidelines for fast equipment distribution network
-
Download the APP and register your personal account, open the Bluetooth of your mobile phone and connect to the WIFI network after successful login.
-
Press and hold the ON/OFF button of the controller for more than 5 seconds, when you see the light body light up in red and flashing rapidly, release the button, and the device will enter the network state.
-
Click Figure 1 (Add Device) or the RI plus sign in the upper right corner, then select Figure 2 [Auto Scan] and click [Next] to enter the Figure 3 page and click [Next].
-
Enter the password of the currently connected WIFI, click [Next] to light up the white light after a successful connection, then click [Next], finally click [Done] in the upper right corner to enter the main control interface of the APP to complete the network (if the above operation is not successful, then return to the first step to re-operation)
III: Equipment unbinding. After completing the wiring test action, if you need to unbind the device, you can unbind it directly on the top of the APP interface, after clicking unbind, the device After you click Unbound, the device will re-enter the network distribution mode. 1. APP unbinding: Click on the top right corner of the device control interface. Click the button at the top right corner of the device control interface to enter the device details page, and then click [Remove Device] at the bottom of the device details interface. After the APP unbundling is completed, the online device will also be unbundled automatically and will enter the fast networking function with the red light flashing.
controller function
| Button | Function |
|---|---|
| ON/OFF | Short press to turn on/off. long press for 5 seconds and the red light |
MI task entering network MOWS
CCT| Color Switch
MODEL| Scene Modes/Music Modes
(Press fort second. and the Mine light will flash. Press it again the two
modes retch between each other)
Installation diagram
Way
- Mount it vertically
- Attach the light bars to the back
1. Peel off the 3M self-adhesive centrifugal paper and stick it to the base surface
2. Wipe the adhered surface, then peel off the other side of the centrifugal paper and adhere it
Function
Wide Applications: Home, bars, game halls, etc.
Troubleshooting
- When the device cannot be linked to the Smart Life app Make sure the device is powered on and the phone Is connected to WIFI and Bluetooth is turned on When connecting for the first time, make sure your smartphone is close to the device and the router. Make sure the device is in the pending connection state and the red light flashes If it Is still not successful, please exit the Smart Life app and then go back into the Smart Life app to connect (make sure the device is in the pending connection state and the red light is flashing)
- Sluggish response and loss of connection Make sure the WIFI network is stable and the device is powered up properly Re-exit the Smart Life program and re-enter the Smart Life program to conned
- Device music sensitivity is not enough Make sure the controller is close to the music source, this will make the microphone sound better You can adjust the sensitivity inside the “Smart Life” program
- 1f the adhesive provided is not sticky enough to wipe the wall, please make sure it is dry and clean. After installing the bracket, press hard for a few times to make sure it sticks completely. IX: Third-party controls supported Alexa and Google Assistant
FCC Caution:
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. FCC Radiation
Exposure Statement: This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance 20cm between the radiator& your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>