LUCIDE 77975-20-30 BINARI Plafondspot LED Instruction Manual

LUCIDE 77975-20-30 BINARI Plafondspot LED

Product Information

Thank you for purchasing a Lucide original! This installation manual provides detailed information about the product. Lucide aims to inspire and illuminate its clients by offering trendy, high-quality, and affordable lighting solutions. Join the community
of #illuminatesyourworld and explore our entire collection on our website. You can also watch our brand video to get a glimpse behind the scenes at Lucide and see how others around the world use our products.

General Information

• Item number: 77975/20/30
• EAN code: 5411212770776
• Dimensions (LxWxH): 20 cm x 20 cm x 15 cm
• Main material: Metal
• Color: Black
• Style: Modern
• Shape: Square
• Weight: 2.00 kg

For more specifications and dimensions of this product, please visit our website at www.lucide.com.

Technical Drawing & Dimensions

Item number: 77975/20/30
EAN code: 5411212770776

For more specifications or dimensions of this product, please visit our website at www.lucide.com.

Installation Drawing Specifications

Item number: 77975/20/30
EAN code: 5411212770776

Safety Instructions

Explanation of symbols that may appear on the fixture:

• This item is only suitable for indoor use, excluding the bathroom (unless a higher IP degree allows bathroom usage).
• IP 44: Protection against solid objects greater than 1mm and water splashes from all directions.
• Legislation requires that all electrical and electronic equipment marked with the recycling symbol should be returned to a municipal waste collection point for reuse and recycling.
• Class I: The item has an earth connection. The earth wire (green-yellow) must be connected to the earth connection.
• Class II: The item is double insulated and must not be connected to the earth wire.
• IP 20: Protection against touch by fingers.
• If the protective glass is damaged or broken, it should be immediately replaced.
• Respect the minimum distance between the lamp and flammable objects.

Product Usage Instructions

To use the Lucide product, please follow these instructions:

1. Ensure that the product is suitable for indoor use and not intended for bathroom usage, unless specified by a higher IP degree.
2. Check the item number (77975/20/30) and EAN code (5411212770776) for reference.
3. Refer to the technical drawing and dimensions provided on our website for a better understanding of the product.
4. Follow the safety instructions mentioned above, including connecting the earth wire for Class I products.
5. Respect the minimum distance between the lamp and flammable objects to ensure safety.
6. In case the protective glass is damaged or broken, replace it immediately.

For any further assistance or detailed specifications, please visit our website at www.lucide.com or contact our customer support.

Thank you for purchasing a Lucide original!
This manual will hopefully guide you easily through the installation process. We aim to inspire and illuminate our clients by offering trendy, high-quality and affordable lighting.
Welcome to the community of #illuminatesyourworld

General

• Dimensions LxWxH: 20cm x 20cm x 15cm Main material: Metal
• Color: Black
• Style: Modern
• Shape: Square
• Weight: 2,00kg

Specifications

• Dimmable: No
• Light direction: Downlight
• Adjustable in height: Not In Height Adjustable Directional: Rotatable & Tiltable (360 Degrees) Cable: No Cable On Product
• Sensor: Without Sensor
• Control: Light Switch Control
• Power supply: Adapter/Power Grid
• IP-Class: 20
• Electric Class: 1
• Number of light sources: 4
• Lamp socket: Integrated LED
• Maximum wattage: 4,5W
• Power requirements: 220-240V~50Hz Lumen: 1520Lm
• Colour temperature: 2700K
• Color Rendering Index: 80
• Expected lifetime: 15000h
• Warranty: 3 Years

TECHNICAL DRAWING & DIMENSIONS

INSTALLATION DRAWING SPECIFICATIONS

Item number: 77975/20/30

EAN code: 5411212770776

Safety Instructions

• Please read this notice carefully and keep it during the lifetime of this product. Follow the instructions for a safe and correct instal-lation and functioning of the light fixture. The manufacturer does not accept any responsibility for damage caused by improper installation and service. Installation should always be done by a qualified electrician.
• Always isolate the power before commencing installation, maintenance or repair.
• In case of doubts, please contact a qualified electrician.
• Please pay attention to locations where the item can be installed (indoor, outdoor, bathroom (for outdoor and bathroom installa-tion, please see further). Indoor items cannot be used in humid places. Do not put the item in contact with water or any liquids or inflammable products. Always respect the minimal distance (indicated on the light) to inflammable products.
• During installation, make sure that the cables will not be squeezed or damaged by sharp edges. If the external flexible cable is damaged, it needs to be replaced exclusively by the manufacturer, his service agent, or a qualified electrician.
• This is to avoid all risks.
• Because the temperature of the item and the bulbs can get very high, they must cool down before being touched. Always use the correct bulb (respect type and maximal wattage as indicated on the product).

Explanation of the symbols which can appear on the fixture

• This item is only suitable for indoor use, exclusive bathroom (except if a higher IP degree permits that the item can be used in the bathroom).
• Legislation requires that all electrical and electronic equipment must be collected for reuse and recycling. Electrical and electronic equipment marked with this symbol indicating separate collection of such equipment must be returned to a municipal waste collection point.
• Class I: The item has an earth connection. The earth wire (green-yellow) needs to be connected to the earth connection (marked with this symbol).
• Class II: The item is double insulated and must not be connected to the earth wire.
• Class III: The item is only suitable for lower voltage supply and must not be connected to the earth wire.
• IP 20: Protection against contact with a finger
• If the protection glass is damaged or broken, it needs to be replaced immediately.
• Please respect the minimum distance from the bulb to inflammable objects.

Warranty declaration

Lucide NV warrants that the products supplied will be free from defects in material and workmanship for a period of 3 years from the date of purchase by the end user, if the item is installed and maintained properly as mentioned in the user manual.
Exclusions for the warranty:

1. Broken glass parts of the fixture will only be replaced within 14 days after purchasing by the end user.
2. Normal wear and tear, discoloring as a result from normal use.
3. Damage caused by external causes like fire, water, wrong use/ installation or maintenance of the product. For warranty claims the customer needs to hand over defective fixture/part and the original purchase ticket.

Further explanations can be found on our website.
www.lucide.com

ILLUMINATES YOUR WORLD

LUCIDE NV
LUCIDE NV BISSCHOPPENHOFLAAN 145, 2100 DEURNE, BELGIUM info@lucide.com tel: +32(0)3 366 22 04
www.lucide.com

References

• Lucide lighting - Illuminates your world.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>