Diveotree 3 In 1 Foldable Magsafe Charger Stand Instruction Manual

**Diveotree 3 In 1 Foldable Magsafe Charger Stand Instruction Manual

**

Product appearance

Instructions for use

1. Please connect this wireless charger to the 5V3A, 9V/3A adapter through the Type-c fast charging cable and connect the source
2. Put the phone in the mobile phane charging area and the mobile phone can be charged
3. Place the watch in the watch charging area to charge the watch
4. Put the wireless charging Bluetooth earphone box in the earphone charging area to charge the earphone

LED status

light mode
High brightness Low brightness breathe The lights go out
TWS charging| Blue light to green light
Phone charging| Blue light standby| Foreign body warm yellow light flashes for 0.5s/time
FOD| The blue light flashes quickly for 5 seconds and then turns blue

Notice!

To ensure safe and efficient charging of all three devices at the same time, it is recommended to use an adapter and a fast charging cable. (If the voltage of the adapter is < 5V/2A or the current of the usb cable is < 2A there will be a situation that the mobile phone, Apple Watch, and headphones can’t be charged or mobile phone will not have a charging animation.).

Fordable Operating Instructions

Product parameters

Name
Fordable wireless charging station 3in 1

Product size
137mm68mm32mm

Operating frequency
110-205KHz

Material
ABS+PC

Wireless charging effective distance
<smm

Input
DCSV/3A 9V/3A

Output (phone)
5W/7.5W/10W/15W(Max)

Output (Ts)
5W(Max)

Output (Watch)
5W(Max)

Notes

Applicable equipment

Please check whether the mobile phone supports wireless charging.
This product supports fast wireless charging function and conforms to Ql wireless charging standards; By magnetic induction.
Enables short-range wireless power transfer.

About the use and installation of Magnetic Ring

If your phone has a thicker case o you are using a phone without magnetic suction function but with wireless charging function, Such as Iphone 11/Pro. ‘etc.When charging with the wireless charging stand, It will lip or can not be ‘adsorbed firmly, You can use the magnetic ring according to the following method to improve the charging experience.

1. Move the phone vertically and horizontally so that it is parallel to the charging pad and against the wireless charger panel.When the phone finds the wireless charging induction zone, the phone will indicate that it is charging.

2. Keeping the phone in place, use a pencil or washable marker to draw a dotted line along the phone area wireless charging panel on the back of the phone or on the case (Refer to Figure 1).
   

3. Then peel off the adhesive sticker on the magnetic ring, stick the magnetic ring firmly according to the positioning line you just made (Refer to Figure 2), and then wipe the marking spot clean.

Adapter selection

When using a 5V/2A output adapter, the wireless charger supports a 5W load. When using QC3.0 compliant adapters, the wireless charger supports 15W load;

*In order to ensure the normal use of the charger, it is recommended to use PD fast charging or QC3.0 compliant adapter.

Waen!

Do not put metal debris or magnetic cards on the charging pad, it may cause the charger to heat up!
Foreign objects should be removed when alarming!
Slight heating is normal, and it will heat up during the charging of the mobile phone battery!
Do not place the charger near fire sources or corrosive environments!

Packing list

• Wireless charger X1
• USB cable X1
• Instruction manual X1
• 18W Adapter x 1
• Mangetic Ring x1

Symbols

Documents / Resources

| Diveotree 3 In 1 Foldable Magsafe Charger Stand [pdf] Instruction Manual
3 In 1 Foldable Magsafe Charger Stand, Foldable Magsafe Charger Stand, Magsafe Charger Stand, Charger Stand, Stand
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>