ANKER 73100520100 Everfrost 40 Portable Battery Cooler User Manual

ANKER 73100520100 Everfrost 40 Portable Battery Cooler

Product Information

Specifications

• Product Name: Anker EverFrost Powered Cooler 40
• Model Number: GM95-145600-D
• Capacity: 40 liters
• Power Source: Battery pack (Anker adapter GM95-145600-D)
• Usage: Cooling and storing perishable items
• Weight: TBD
• Dimensions: TBD

Product Usage Instructions

1. Assembly: Ensure the unit is properly assembled according to the provided assembly instructions before use.
2. Powering On: Connect the Anker adapter GM95-145600-D to the battery pack and then plug it into a power source.
3. Cooling: Place perishable items inside the cooler and turn on the unit using the control panel.
4. Cleaning: Before cleaning, make sure to unplug the cooler and remove all items from inside. Use a damp cloth to wipe down the interior and exterior surfaces.
5. Storage: When not in use, store the cooler in a cool, dry place away from direct sunlight.

FAQs (Frequently Asked Questions)

Can I charge the battery pack with a different charger?

No, recharge only with the charger specified by the manufacturer to avoid any risks of fire or damage.

What should I do if liquid is ejected from the battery?

Avoid contact with the liquid; if accidental contact occurs, rinse with water and seek medical help if it gets in your eyes.

Can I modify the appliance or battery pack?

Do not modify or attempt to repair the appliance or battery pack except as indicated in the user manual to ensure safety.

What is the recommended storage temperature for the cooler?

Store the cooler within the temperature range specified in the instructions to prevent damage to the battery pack.

How long does the cooler's battery last when fully charged?

The battery capacity of the cooler is 299Wh. When the cooler's temperature is at 25°C (77 ) ambient temperature, it will run for 35.8 hours with 4°C (39.2 ) storage temperature.

What ambient temperature can the cooler be used normally?

The recommended ambient temperature is 32°F - 104°F (0 - 40°C).

What should I do when using a solar charger to charge Anker EverFrost Powered Cooler?

The solar input supports an 11-30V solar charger with an XT-60 connector. We recommend using Anker 100W Solar Panel to get the best compatibility.

Important Safety Instructions

• To reduce the risk of injury, users must read the instruction manual.
• WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• If the power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons in order to avoid a hazard.
• The appliance is only to be used with the power supply unit provided with the appliance.
• Disconnect the power supply before cleaning and maintenance.

Attention Not permitted on aircraft.

Instructions for appliances incorporating batteries that are intended to be replaced by the user shall include the following:

• Battery type: Rechargeable lithium-ion battery (A17B5)
• CAUTION: Risk of explosion if the battery is replaced by an incorrect type. Do not use non-rechargeable batteries!
• A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas. Under abusive conditions, liquid may be ejected from the battery—avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help as it may cause irritation or burns.
• The battery must be removed from the appliance before it is scrapped.
•  The appliance must be disconnected from the main power supply when removing the battery.
• Do not dispose of the battery in heat or fire. The battery is to be disposed of safely.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
• WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
• When connecting to the DC power supply, the appliance must only be supplied at safety extra low voltage corresponding to the marking on the appliance.

Detachable Supply Unit GM95-145600-D

• Suitable for camping.
• The appliance shall not be exposed to rain.

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
WARNING: When positioning the appliance, ensure the power cord is not trapped or damaged.
WARNING: Do not place multiple portable socket outlets or portable power supplies at the rear of the appliance. A child entrapment warning statement shall be included in either the operating instructions or in a use and care manual provided with each refrigerator and shall include the following or equivalent wording:
WARNING: Risk of child entrapment.

Before you throw away your old refrigerator or freezer:

• Remove the doors.
• Leave the shelves in place so children cannot easily climb inside.
• Prevent unintentional starting. Ensure the switch is off before connecting to the battery pack, picking it up, or carrying the appliance. Carrying the appliance with your finger on the switch or powering the appliance with the switch on may lead to accidents.
• Disconnect the battery pack from the appliance before making any adjustments, changing accessories, or storing the appliance. Such preventive safety measures reduce the risk of starting the appliance accidentally.
• Recharge only with the charger specified by the manufacturer. A charger suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.
• When the battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can connect one terminal to another. Burn hazards or fire may occur if the terminals are shorted together.
• Under abusive conditions, liquid may be ejected from the battery—avoid contact. If contact accidentally occurs, rinse with water. If liquid gets in your eyes, seek medical help.
• Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack or appliance that is damaged or modified as they may exhibit unpredictable behavior resulting in fire explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 266°F (130°C) may cause an explosion.
• Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
• Do not modify or attempt to repair the appliance or the battery pack except as indicated in the instructions for use and care.
• The battery pack must be used with the Anker adapter (GM95-145600-D) for charging.
• Do not expose the charger to rain, moisture, or snow.
• To reduce the risk of damage to the cigarette lighter plug and cord, pull by plug rather than the cord when disconnecting the charger.
• Make sure the cord is placed well so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not operate the charger with a damaged cord or cigarette lighter plug—replace it immediately.
• Do not operate the charger if it has received a sharp blow, dropped, or otherwise damaged in any way.
• Do not disassemble the charger. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
• To reduce the risk of electric shock, unplug the charger before attempting any maintenance or
• Please be warned that the unit must be properly assembled in accordance with the assembly instructions before it is used.
• Explain and describe the location, function, and operation of each unit control, including all user-operated devices intended to reduce the risk of fire, electric shock, or injury to persons. Please be warned against tampering with such devices.

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1-800-988-7973

RF Exposure Compliance Statement
This equipment complies with the FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0.03ft (20cm) between the radiator and your body.

IC Statement
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The device is in compliance with RF field strength limits, and users can obtain information on RF exposure and compliance.
This Class B digital apparatus complies with the Canadian ICES-003.
CAN ICES-003 (B)/NMB-003(B)

Bluetooth:
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Anker Innovations Limited is under license. Other trademarks and trade names are those of their respective owners.
Manufacturer: Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong.

What’s in the Box

Overview

LCD Screen

Powering Your Cooler

We do not recommend using multiple charging methods at the same time.

Without the Battery

• AC Power
  Power the cooler by connecting to a wall outlet with the AC charging cable.

• Power via Car
  Connect the cooler to a car’s output port with the car charging cable.

With the Battery

• AC Power
  Power the cooler by connecting to a wall outlet with the AC charging cable.

• Power via Car
  Connect the cooler to a car’s output port with the car charging cable.

• Recharging via Solar Panel
  Power the cooler by connecting the battery to a solar panel with an XT-60 to XT-60 cable.

• USB-C Recharging
  Power the cooler by connecting the battery to a wall outlet with the USB-C cable.

Using Your Cooler

1. Press the power button for two seconds to turn on your cooler. The LCD screen will light up.
2. Push the cover up to open the cooler.
3. Press the power button once to light up the LCD screen.

Installing the battery

Press the snap-fits to remove the battery cover. Place the battery inside and you will hear a click when the installation is successful. Then, place the battery cover back.

The battery cover will automatically open when lifted up.

Setting the Temperature
To enter the temperature adjustment mode, press the settings button until the temperature number flashes. Press the up or down buttons to adjust the zone temperature, and confirm your temperature by pressing the settings button again.

Setting the Temperature Unit
To enter the temperature adjustment mode, press the settings button until the temperature unit icon flashes. Press the up or down buttons to choose between “Celsius/Fahrenheit,” and confirm the unit by pressing the settings button again.

Bluetooth
Press the settings button for 2 seconds to turn on Bluetooth. The Bluetooth icon on the screen will flash. It will automatically connect to your phone with Bluetooth on, and the icon will turn steady white.

Car Battery Protection Grades
To enter the voltage level adjustment mode, press the settings button until the voltage level icon flashes. Press the up or down buttons to choose between “L/M/H”, and confirm it by pressing the settings button again. Select “M/H” gear when the product is powered via a car. It’s recommended to select “L” gear when powered by an independent power supply.

When the car’s battery voltage is lower than the set value without the battery, your cooler will stop working. When the car’s battery voltage is lower than the set value, the cooler switches to its own battery for power supply. Once the car battery is restored, it switches to the car battery’s power source.

The Anker App for Smart Control
You can remotely control your powered cooler using the Anker app. Please download the app and its user manual by scanning this QR code. Connect the device to a network before using the app for the first time. After connecting successfully, Connect the device to a network before using the app for the first time. After connecting successfully, you can connect your devices off- grid.

Specifications

• Storage Capacity 43L
• Battery Capacity 299Wh
• AC Input Voltage 100V-240V, 50Hz/60Hz
• AC Input Power 95W Max
• DC Input 5.5A(12V)/ 2.5A(24V)
• Refrigerant R134a(34g)
• Size 73.2 x 43.0 x 48.7cm
• Net Weight 21.8kg/48l
• Temperature Range In the Fridge -20 ~ 20° C/-4~68° F
• Operating Temperature Range 0-40°C / 32 ~ 104° F

Troubleshooting

• Reminder to Close Doors: The buzzer will send a reminder if the cooler’s cover is not closed for more than 180 seconds.
• The cooler will stop working if the tilt angle exceeds 30 degrees. Place it horizontally, and it will resume normal operation in 5 minutes.

Warranty

Anker EverFrost Powered Cooler Warranty Policy
This Anker EverFrost Powered Cooler was purchased on AnkerDirect and Anker authorized resellers to come with a limited warranty (“warranty”) as set out below. By using an Anker EverFrost Powered Cooler, you agree to be bound by the terms of the Anker limited warranty. 2-year limited warranty for the Anker EverFrost Powered Cooler and a 3-year limited warranty for the compressor for purchases made on AnkerDirect and Anker authorized resellers. The warranty period starts from the date of purchase.
Anker’s limited warranty is restricted to the country of purchase. The limited warranty is void on items taken outside the country they were originally bought in or shipped to directly from an authorized online purchase.

Exclusions and Limitations
Not covered under warranty:

• Products that are damaged or modified.
• Products operated with a damaged cord, plug, or output cable.
• Products that are disassembled.
• Products that are cleaned with harmful chemicals or detergents.
• Non-quality related issues (after 30 days of purchase).
• Products purchased from unauthorized resellers.
• Products without sufficient proof of purchase.
• Products that have been refunded.
• Products with an expired warranty.
• Lost, stolen, or free products.
• Damage from outside sources.
• Repairs through 3rd parties.
• Damage from misuse of products (including, but not limited to falls, use of the product in excess of its output rating, exposure of the product to rain or snow, extremely low air pressure, extreme temperatures).
• Purchases from illegitimate sources.
• Batteries that are damaged when not used for a long time or not properly maintained according to the user manual.

Anker is Not Liable For:

• Loss of data incurred from the use of Anker products.
• Returning personal items sent to Anker.

When returning items with a prepaid shipping label provided by Anker, Anker takes responsibility for any damage or loss incurred in transit. When returning items for non-quality issues, the buyer assumes responsibility for any damage or loss incurred in transit. Anker does not provide refunds for items damaged in transit due to non-quality-related warranty claims.

Refund and Warranty Claims
For more details please refer to www.anker.com/anker-portable-power-station- warranty-policy
For warranty claims, you can send an email to:
US/CA/UK/DE/JP market: support@anker.com
MEA market: support.mea@anker.com
CN market: CED-CN@anker.com

Or you can call us at:

• US/CA: +1 (800) 988 7973
• UK: +44(0)1604 936 200
• DE: +49(0)69 9579 7960
• JP: +81 03 4455 7823
• UAE: +971 8000 320 817
• KSA: +966 8008 500 030
• Kuwait: +965 2206 9086
• Egypt: +20 8000 000 826
• AU: +61 3 8331 4800
• TR: +90(850)460 1414
• RU: +8(800)511 8623
• CN: +86 400 0550 036
• KR: +82 02-1661-9246
• IN: +91 1800 3138 831
• Middle East & Africa: +971 520750842

Valid Proof of Purchase
Please refer to: https://us.anker.com/policies/refund-policy
Shipping Costs Must Be Covered by the Buyer in the Following Situations
Please refer to: https://us.anker.com/policies/refund-policy
This page is attached to the Anker warranty page, and Anker reserves the right of final interpretation of the content.

Register Your Anker PowerHouse Today

Why Register?

1. Hassle-Free Warranty: Confirm the 2-year limited warranty for your Anker EverFrost Powered Cooler and 3-year limited warranty for the compressor.
2. Fast Customer Service: Enjoy exclusive customer service and get what you need quickly.
3. Receive the Latest News: Get exclusive first looks at new products and instant updates on official events.

Scan the QR code below to enter the smart self-service page for more information about your Anker EverFrost.

Customer service
2-Year Limited Warranty*
Lifetime technical support
support@anker.com
(AU) +61 3 8331 4800

*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com

Or scan the QR code below:

References

• Anker Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>