FINLUX FXN 910T Washing Machine User Manual

FINLUX FXN 910T Washing Machine

Specifications

• Operating voltage/frequency: 220-240 V~/50Hz
• Total current: 10 A
• Water pressure: Maximum 1 Mpa / Minimum 0.1 Mpa
• Total power: 2200 W
• Maximum washing capacity (dry laundry): 9 kg

Product Information
This washing machine, model FXN 910T FXN 911 BD, is designed for domestic use only. It is important to read the user manual carefully before using the appliance to ensure safe and proper operation.

Safety Instructions

General Safety Warnings
Install the machine in a well-ventilated location with constant air circulation. Avoid touching the drain hose or discharged water while the machine is running to prevent burns. Ensure the machine is carried by at least two people to prevent risks of electrical current.

Installation

1. Place the washing machine in a well-ventilated area withproper air circulation.
2. Ensure the machine is placed on a flat, stable surface to prevent vibration during operation.

Operation

1. Load the dry laundry into the drum, ensuring not to exceed the maximum washing capacity of 9 kg.
2. Add detergent as per the manufacturer’s instructions.
3. Select the desired wash program from the program table provided in the manual.
4. Start the machine and follow the program instructions for a thorough wash cycle.

Maintenance

1. Regularly clean the detergent dispenser and drum to prevent buildup of residue.
2. Check and clean the drain filter periodically to maintain proper drainage.

FAQs

Q: Can I use this washing machine for commercial purposes?
A: No, this washing machine is designed for domestic use only. Commercial use will void the warranty.

Q: Where can I get a softcopy of the user manual?
A: You can request a softcopy of the user manual by emailing service@zora.bg with your model name and serial number.

SAFETY INSTRUCTIONS

Operating voltage / frequency (220-240) V~/50Hz

Total current (A)

10

Water pressure (Mpa)

Maximum 1 Mpa / Minimum 0. 1Mpa

Total power (W)

2200

Maximum washing capacity (dry laundry) (kg)

9

· Do not install your machine on a carpet or such grounds that would prevent the ventilation of its base.
· The appliance is not intended for use by people (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
· Children of less than 3 years should be kept away unless continuously supervised.
· Call the nearest authorized service centre for a replacement if the power cord malfunctions.
· Use only the new water inlet hose coming with your machine when making water inlet connections to your machine. Never use old, used or damaged water inlet hoses.
· Children should not play with the appliance. Cleaning and user maintenance should not be made by children without supervision.

EN – 1

NOTE: For a softcopy of this user manual, please contact the following address: “service@ zora.bg”. In your e-mail, please provide the model name and serial number (20 digits) which you can find on the appliance door.
Read this user manual carefully.
Your machine is for domestic use only. Using it for commercial purposes will cause your warranty to be cancelled.
This manual has been prepared for more than one model therefore your appliance may not have some of the features described within. For this reason, it is important to pay particular attention to any figures whilst reading the operating manual.

General Safety Warnings
· The necessary ambient temperature for operation of your Washing Machine is 15-25 °C.
· Where the temperature is below 0 °C, hoses may split or the electronic card may not operate correctly.
· Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins.
· It is recommended that for your first wash, you select the 90° Cotton programme without laundry and half fill compartment II of the detergent drawer with a suitable detergent.
· Residue may build up on detergent and softeners exposed to air for a long period of time. Only
EN – 2

put softener or detergent in the drawer at the beginning of each wash. · Unplug your Washing Machine and switch off the water supply if the Washing Machine is left unused for a long time. We also recommend that you leave the door open to prevent build up of humidity inside the Washing Machine. · Some water may be left in your Washing Machine as a result of quality checks during production. This will not affect the operation of your Washing Machine. · The packaging of the machine could be hazardous to children. Do not allow children to play with the packaging or small parts from the Washing Machine. · Keep the packaging materials in a place where children cannot reach them, or dispose of them appropriately. · Use pre-wash programs only for very dirty laundry. Never open the detergent drawer while the machine is running. · In the event of a breakdown, unplug the machine from the mains supply and turn the water supply off. Do not attempt to carry out any repairs. Always contact an authorised service agent. · Do not exceed the maximum load for the washing programme you have chosen. Never force the door open when your Washing Machine is running. · Washing laundry containing flour may damage your machine.
EN – 3

· Please follow the manufacturers’ instructions regarding the use of fabric conditioner or any similar products that you intend to use in your Washing Machine.
· Make sure that the door of your Washing Machine is not restricted and can be opened fully.
Install your machine in a location that can be fully ventilated and preferably has constant air circulation.
Read these warnings. Follow the advice given to protect yourself and others from risks and fatal injuries.

RISK OF BURNS
Do not touch the drain hose or any discharged water while your Washing Machine is running. The high temperatures involved pose a burn risk.

RISK OF DEATH FROM ELECTRICAL CURRENT
· Do not connect your Washing Machine to the mains electricity supply using an extension lead.
· Do not insert a damaged plug into a socket. · Never remove the plug from the socket by pulling
the cord. Always hold the plug. · Never touch the power cord/plug with wet
hands as this could cause a short circuit or electric shock. · Do not touch your Washing Machine if your hands or feet are wet. · A damaged power cord/plug can cause fire or give you an electric shock. When damaged it must be replaced, this should only be done by
EN – 4

qualified personnel. Risk of flooding · Check the speed of water flow before placing the drain hose in a sink. · Take necessary measures to prevent the hose from slipping. · Water flow may dislodge the hose if it is not properly secured. Make sure the plug in your sink does not block the plug hole. Danger of Fire · Do not store inflammable liquids near your machine. · The sulphur content of paint removers may cause corrosion. Never use paint removing materials in your machine. · Never use products that contain solvents in your machine. · Please ensure that garments loaded into your Washing Machine are free from foreign objects such as nails, needles, lighters and coins. Risk of fire and explosion Risk of falling and injury · Do not climb on your Washing Machine. · Make sure hoses and cables do not cause a trip hazard. · Do not turn your Washing Machine upside down or on its side. · Do not lift your Washing Machine using the door or detergent drawer.
The machine must be carried by at least 2
EN – 5

people.
Child safety · Do not leave children unattended near the
machine. Children might lock themselves in the machine resulting in risk of death. · Do not allow children to touch the glass door during operation. The surface becomes extremely hot and may cause damage to skin. · Keep packaging material away from children. · Poisoning and irritation may occur if detergent and cleaning materials are consumed or come into contact with the skin and eyes. Keep cleaning materials out of the reach of children.
1.2 During Use
· Keep pets away from your machine. · Please check the packaging of your machine
before installation and the outer surface of the machine once the packaging has been removed. Do not operate the machine if it appears damaged or if the packaging has been opened. · Your machine must only be installed by an authorised service agent. Installation by anyone other than an authorised agent may cause your warranty to be void. · This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the
EN – 6

appliance. Cleaning and user maintenance shall not be done by children without supervision. · Only use your machine for laundry that is labelled as suitable for washing by the manufacturer. · Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed they may cause heavy vibration, noise and malfunction of the machine and cause the guarantee to be void. · Your warranty does not cover damage caused by external factors such as fire, flooding and other sources of damage. · Please do not throw away this user manual; keep it for future reference and pass it onto the next owner. NOTE: Specifications for the machine may vary depending on the product purchased.
1.3 Packaging and Environment Removal of packaging materials Packaging materials protect your machine from any damage that might occur during transportation. The packaging materials are environmentally friendly as they are recyclable. Use of recycled material reduces raw material consumption and decreases waste production.
EN – 7

1.4 Savings Information Some important information to get the most efficient use out of your machine: · Do not exceed the maximum load for the washing
programme you have chosen. This will allow your machine to run in energy saving mode. · Do not use the pre-wash feature for lightly soiled laundry. This will help you save on the amount of electricity and water consumed.
CE Declaration of conformity We declare that our products meet the applicable European Directives, Decisions and Regulations and the requirements listed in the standards referenced. Disposal of your old machine
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
EN – 8

2. TECHNICAL SPECIFICATIONS 2.2 Technical Specifications

3

2

1

4

Operating voltage / frequency (V/Hz)

(220-240) V~/50Hz

5

Total current (A)

10

Water

Maximum: 1 Mpa

pressure

6

(Mpa)

Minimum :

0.1 Mpa

7

Total power (W)

2200

8

9

Maximum 9

dry laundry

10

capacity (kg)

2.1 General Appearance 1. Electronic Display 2. Programme Dial 3. Upper Tray 4. Detergent Drawer 5. Drum 6. Pump Filter Cover 7. Water Inlet Valve 8. Power Cable 9. Discharging Hose 10. Transit Bolts

Spinning revolution (rev / min)

1000

Programme number

15

Dimensions (mm)

Height

845

Width

597

Depth

582

EN – 9

3. INSTALLATION
3.1 Removing the Transit Bolts

3.2 Adjusting the Feet / Adjusting Adjustable Stays

X4

X4

1

2

X4

3

4

1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers from the rear of the machine. If the bolts are not removed, they may cause heavy vibration, noise and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3. Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the removal of the transit bolts. The transit bolts should be stored for future use.

NOTE: Remove the transit bolts
before using the machine for the first time. Faults occurring due to the machine being operated with transit bolts fitted are out of the scope of the warranty.

1
1. Do not install your machine on a surface (such as carpet) that would prevent ventilation at the base.
· To ensure silent and vibration-free operation of your machine, install it on a firm surface.
· You can level your machine using the adjustable feet.
· Loosen the plastic locking nut.
X4

2

3

2. To increase the height of the machine, turn the feet clockwise. To decrease the height of the machine, turn the feet anticlockwise.
· Once the machine is level, tighten the locking nuts by turning them clockwise.
3. Never insert cardboard, wood or other similar materials under the machine to level it.
· When cleaning the ground on which the machine is located, take care not to disturb the level of the machine.

3.3 Electrical Connection

· Your Washing Machine requires a 220240V, 50 mains supply.
EN – 10

· The mains cord of your washing machine is equipped with an earthed plug. This plug should always be inserted to an earthed socket of 10 amps.
· If you do not have a suitable socket and fuse conforming with this, please ensure the work is carried out by a qualified electrician.
· We do not take responsibility for damage that occurs due to the use of ungrounded equipment.
NOTE: Operating your machine
with low voltage will cause the life cycle of your machine to be reduced and its performance to be restricted. 3.4 Water Inlet Hose Connection
3/4″
2 1

10 mm

3

4

1. Your machine may have either a single water inlet connection (cold) or double water inlet connection (hot and cold) depending on the machine specifications. The white capped hose

should be connected to cold water inlet and red capped hose to the hot water inlet (if applicable). · To prevent water leaks at the joints, either 1 or 2 nuts (depending on your machine’s specifications) are supplied in the packaging with the hose. Fit these nuts to the end(s) of the water inlet hose that connect to the water supply.
2. Connect new water inlet hoses to a ¾ , threaded tap.
· Connect the white capped end of the water inlet hose to the white water inlet valve on the rear side of the machine and the red capped end of the hose to the red water inlet valve (if applicable).
· Hand tighten the connections. If in any doubt, consult a qualified plumber.
· Water flow with pressure of 0. 1-1 Mpa will allow your machine to operate at optimum efficiency (pressure of 0. 1 Mpa means that more than 8 litres of water per minute will flow through a fully opened tap).
3. Once you have made all of the connections, carefully turn the water supply on and check for leaks.
4. Ensure that the new water inlet hoses are not trapped, kinked, twisted, folded or crushed.
· If your machine has a hot water inlet connection, the temperature of the hot water supply should not be higher than 70°C.
NOTE: Your Washing Machine
must only be connected to your water supply using the supplied new fill hose. Old hoses must not be reused.

~ 95 cm ~ 145 cm

~ 140 cm ~ 95 cm

0 ­ max. 100 cm

~ 95 cm

EN – 11

~ 150 cm

3.5 Water Discharge Connection

4.1 Detergent Drawer (*)

· Connect the water drain hose to a standpipe or to the outlet elbow of a household sink, using additional equipment.

· Never attempt to extend the water drain hose.

· Do not put the water drain hose from

1

your machine into a container, bucket or

bathtub.

2

· Make sure that the water drain hose is

not bent, buckled, crushed or extended.
3

· The water drain hose must be installed

at a maximum height of 100 cm from the ground.

4

4. CONTROL PANEL OVERVIEW

1

2

3

1. Detergent Drawer 2. Programme Dial 3. Electronic Display

5
6
1. Liquid Detergent Attachments () 2. Main Wash Detergent Compartment 3. Softener Compartment 4. Pre-Wash Detergent Compartment 5. Powder Detergent Levels () 6. Powder Detergent Scoop () () Specifications may vary depending on the machine purchased.

EN – 12

4.2 Sections Main wash detergent compartment:

4.3 Program Dial

This compartment is for liquid or powder detergents or limescale remover. The fluid detergent level plate will be supplied inside your machine. (*) Fabric conditioner, starch, detergent compartment:

· To select the desired programme, turn the programme dial either clockwise or anti-clockwise until the marker on the programme dial points to the chosen programme.
· Make sure that the programme dial is set exactly to the programme you want.
4.4 Electronic Display
9 8

This compartment is for softeners, conditioners or starch. Follow the instructions on the packaging. If softeners leave residue after use, try diluting them or using a liquid softener. Pre-wash detergent compartment:

1

2 3 4 5 67

This compartment should be used only when the pre-wash feature is selected. We recommend that the pre-wash feature is used only for very dirty laundry. (*) Specifications may vary depending on the machine purchased.

1. Delayed start auxiliary function 2. Selecting the level of soiling 3. Stain selection 4. Selecting the washing water
temperature
5. Spin speed selection 6. Options 7. Save+ / Speed (Eco washing, Quick
Wash auxiliary function) 8. Start Pause Button
9. Energy/Water Efficiency Bar

EN – 13

5. USING YOUR WASHING MACHINE
5.1 Preparing Your Laundry
1
3

curtains or place them in a washing net or bag. 6. Reverse textiles such as pants, knitwear, t-shirts and sweat shirts. 7. Wash socks, handkerchiefs and other small items in a washing net.

2

Can be

Normal

bleached

Do not bleach

washing

Maximum

Maximum

4

ironing temperature
150°C

ironing temperature
200°C

Do not iron

DGVDSH

Can be dry cleaned

No dry cleaning

Dry flat

5

6

7
1. Follow the instructions given in the care labels on the clothing.
· Separate your laundry according to type (cotton, synthetic, sensitive, wool etc. ), washing temperature (cold, 30°, 40°, 60°, 90°) and the degree of dirtiness (slightly stained, stained, highly stained).
2. Never wash coloured and white laundry together.
· Dark textiles may contain excess dye and should be washed separately several times.
3. Ensure that there are no metallic materials on your laundry or in the pockets; if so, remove them.
CAUTION: Any malfunctions
which occur due to foreign materials damaging your machine are not covered by the warranty. 4. Close zips and fasten any hooks and
eyes. 5. Remove the metallic or plastic hooks of

Drip dry

Hang to dry

Do not tumble dry

F
Dry cleaning in gas oil,
pure alcohol and R113 is
allowed

P

A

Perchloroethylene Perchlorinetyhlene

R11, R13,

R11, R113, Gas

Petroleum

oil

5.2 Putting Laundry in the Machine

· Open the door of your machine.
· Spread your laundry evenly in the machine.
NOTE: Take care not to exceed
the maximum load of the drum as this will give poor wash results and cause creasing. Refer to the washing programme tables for information on load capacities.

EN – 14

The following table shows approximate weights of typical laundry items:

LAUNDRY TYPE

WEIGHT (gr)

Towel

200

Linen Bathrobe Quilt cover Pillow slip Underwear

500 1200 700 200 100

Tablecloth

250

· Load each item of laundry separately.
· Check that no items of laundry are trapped between the rubber seal and the door.
· Gently push the door until it clicks shut.

· Put softener in the middle compartment of the detergent drawer. Do not exceed the MAX level.
· Thick softeners may cause clogging of the drawer and should be diluted.
· It is possible to use fluid detergents in all programmes without a pre-wash. To do this, slide the fluid detergent level plate () into the guides in compartment II of the detergent drawer. Use the lines on the plate as a guide to fill the drawer to the required level.
() Specifications may vary depending on the machine purchased.
5.4 Operating Your Machine

click

1

2

· Make sure the door is fully closed, otherwise the programme will not start.
5.3 Adding Detergent to the Machine The amount of detergent you will need to put in your machine will depend on the following criteria: · If your clothes are only slightly soiled,
do not pre-wash. Put a small amount of detergent (as specified by the manufacturer) into compartment II of the detergent drawer.
· If your clothes are excessively soiled, select a programme with pre-wash and put ¼ of the detergent to be used into compartment I of the detergent drawer and the rest in compartment II.
· Use detergents produced for automatic washing machines. Follow the manufacturer’s instructions on the amount of detergent to use.
· In areas of hard water, more detergent will be required.
· The amount of the detergent required will increase with higher washing loads.

1. Plug your machine in to the mains supply.
2. Turn on the water supply. · Open the machine door. · Evenly spread your laundry in the
machine. · Gently push the door until it clicks shut.
5.5 Selecting a Programme Use the programme tables to select the most appropriate programme for your laundry.
5.6 Half-Load Detection System Your machine features a half-load detection system. If you put less than half the maximum load of laundry into your machine it will automatically set the half-load function, regardless of the programme you selected. This means that the selected programme will take less time to complete and will use less water and energy.

EN – 15

(*) Model Dependant 5.7 Auxiliary Functions

· Press the delay key until you reach the time after which you want the machine to start the washing cycle.
· If you have skipped the delay time you would like to set, you can keep pressing the delay key until you reach that time again.
· To use the time delay function, you need to press the Start/Pause key to start the machine.

Before starting the program, you can select auxiliary functions if you wish so. · Press the key of the auxiliary function you want to select. · If the symbol of the auxiliary function is continuously on in the electronic display, the selected auxiliary function will be enabled. · If the symbol of the auxiliary function is flashing in the electronic display, the selected auxiliary function will not be enabled. Reason for not enabling the function: · That auxiliary function might not be
available for the selected washing program.
· The machine might have passed the step where that auxiliary function could be applied.
· The auxiliary function might be incompatible with another auxiliary function you have previously selected.
1. Delayed start auxiliary function

Note: After selecting the delay function, you can select other functions without touching the “Start/Pause” key, and then you can touch the “Start/Pause” key to enable time delay.
To cancel the delay function:
· If you did not press the Start/Pause key, keep touching the delay key until the electronic display shows the duration of the program you have selected. Once you see the program time on the electronic display, this means that the delay has been cancelled.
· If you have pressed the Start/Pause key to start the machine, you just need to touch the delay key once. will go off on the electronic display, press “Start/ Pause” key to start the washing cycle.
2. Selecting the level of soiling

You can use this auxiliary function to delay the start time of the washing cycle for 1 to 23 hours. To use the delay function: · Press the delay key once.

· “1h” will be displayed. the electronic display.

will turn on in

You can wash your laundries in shorter or longer durations, at lower or higher temperatures by selecting a soiling level depending on the soiling level on your laundries. Soiling levels are automatically set in some programs. You can make changes at your discretion.
Note: If there are no changes in the level when you touch the soiling level key, it means there is no soiling level selection in the program you have selected.

EN – 16

3. Stain selection

warm rinse before the selected programme and will add new washing steps for selected washing program. This will soak the laundry with warm water to soften the mix stains before the selected washing programme starts. For any other stain selection, similar stain removal solutions are available. (*) The appliance specifications may vary depending on the purchased product.

You can make use of these auxiliary functions on washing depending on the types of stains. Warning: Do not let the stains on your laundries to get dry and stuck in order for the auxiliary function dedicated for soiling level selection to fully perform its functions. Clean the solids beforehand.
Warning: Press on the newly formed stains on your laundries with a piece of cloth before starting to wash them in your product. Do not scrub!
Your washing machine adjusts the washing temperature, drum rotation, and number and duration of rinse automatically according to the type of stain. For example, the stain removal methods of your washing machine are as follows:
– Sweat stain – Coffee stain – Oil stain – Mix Sweat stain: This additional function will add a cold rinse before the selected programme. This will soak the laundry with cold water to clean the sweat stains before the selected washing programme starts. Coffee stain: This additional function will add new washing steps for selected program. This will prolong the washing duration and apply a washing algortihm to remove the stain. Oil stain: This additional function will add a cold rinse before the selected programme and will add new washing steps for selected program. This will soak the laundry with the cold water before the selected washing program and apply a washing algortihm to clean the oil stain. Mix: This additional function will add a

Note: Before starting your machine, you can switch between stain types. Once you have started the machine, you cannot cancel or change the selected stain type. You can cancel the washing program of your machine, and select the correct stain type and restart the program. If the desired results could not be achieved with the set stain selection at the end of washing, you may have selected the wrong type; restart the washing cycle with the correct stain selection to remove the stain. 4. Selecting the washing water
temperature
You can use the washing water temperature setting key to set the temperature of the washing water for your laundry. · When you select a new program,
the selected program’s maximum temperature will be displayed on the washing water temperature display. · You can press the washing water temperature setting key to decrease the washing water temperature gradually between the maximum water temperature of the selected program and cold water wash ( ). · If you have skipped the washing water temperature you wanted to set, keep pressing the washing water temperature key to find the desired temperature again.

EN – 17

5. Spin speed selection

6.1 Prewash auxiliary function

You can use the speed setting key to set the spin speed for your laundry. When you select a new program, the selected program’s maximum spin speed will be displayed on the spin speed display. You can press the spin speed setting key to decrease the spin speed gradually between the selected program’s maximum spin speed and the spin cancelled ( ) option. If you have skipped the spin speed you wanted to set, you can keep pressing the spin speed key to find the desired speed again.
6. Auxiliary functions

You can use this auxiliary function to perform pre-wash before the main wash cycle for your highly soiled laundry. When you use this function, you need to add detergent into the prewash dispenser of the detergent drawer. To enable the prewash auxiliary function, press the options key until the prewash symbol turns on. If the prewash LED is constantly on in the electronic display, it means that the auxiliary function is selected.
Note: When you want to select the prewash auxiliary function, if does not appear on the display, this means that this feature is not available in the selected washing program.

6.2 Extra rinse auxiliary function

You can use auxiliary functions to make the best washing selection for your laundry. To do this, you can touch the options key on the display panel to enable the following: 6.1 Prewash auxiliary function 6.2 Extra rinse auxiliary function 6.3 Easy ironing auxiliary function 6.4 Anti-allergy auxiliary function.

You can use this auxiliary function for extra rinsing on your laundry. To enable the extra rinse function, keep pressing the options key until the extra rinse symbol turns on. If the extra rinse LED is constantly on in the electronic display, it means that the auxiliary function is selected.

Note: When you want to select the extra rinse auxiliary function, if does not appear on the display, this means that this feature is not available in the selected washing program.

EN – 18

6.3 Easy ironing auxiliary function

7. Eco/Quick Wash auxiliary function

This auxiliary function allows you to have less creased clothes after washing. To enable the easy ironing auxiliary function, press the options key until the easy ironing symbol turns on. If the easy ironing LED is constantly on in the electronic display, it means that the auxiliary function is selected.
Note: When you want to select the easy ironing auxiliary function, if does not appear on the display, this means that this feature is not available in the selected washing program.
6.4 Anti-allergy auxiliary function

Eco washing auxiliary function: If you select this auxiliary function, your machine will slightly extend the duration of the washing program. However, it will use less energy and water for the washing cycle. To enable this function, you can touch the Save+ / Speed selection key on the display panel to turn on the LED light of
the symbol .
Quick Wash auxiliary function: If you select this auxiliary function, your machine will shorten the duration of the washing program. (It is recommended to load the machine with half or less than half of the capacity of the selected washing program.) To enable this function, you can touch the Save+ / Speed selection key on the display panel to turn on the LED light of the symbol .

You can use this auxiliary function to add another rinse cycle for your laundry. Your machine will use hot water in all rinsing steps. (It is recommended for sensitive skin clothing, baby clothes and underclothes). To enable the anti-allergy auxiliary function, keep pressing the options key until the antiallergy function symbol turns on. If the anti-allergy LED is constantly on in the electronic display, it means that the auxiliary function is selected.
Note: When you want to select the
anti-allergy auxiliary function, if does not appear on the display, this means that this feature is not available in the selected washing program.

NOTE: If you load the machine with half or less than half of the laundry capacity of the selected washing program, the machine will detect it thanks to the half load detection system, and this way, it will wash your laundry with less energy and less water in a shorter time. When your machine detects half load, LED light of the symbol
will automatically turn on in the display panel. (*) The appliance specifications may vary depending on the purchased product. · Energy/Water Efficiency Bar:

”

” is an efficiency indicator

comprising 2 bars. The energy/water

efficiency bar shows the amount of energy

and water consumption. The bigger the bar

is, the more energy or water consumption

you will have. The energy/water efficiency

bar might extend or shorten depending

on the selected program’s duration,

EN – 19

temperature setting, spin speed and other auxiliary functions. Start/Pause button

the electronic display disappears. Note: Door remains unlocked in case
when child lock is active and electricity is cut off

By pressing on the Start/Pause button, you may start the programme you have selected or suspend a running programme. If you switch your machine to the standby mode, the Start/Pause led on the electronic display will blink.
5.8 Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot be changed unintentionally.
To activate child lock, press and hold button 6 and 7 simultaneously for at least 3 seconds. `’CL” will flash on the electronic display for 2 seconds when the child lock is activated.

5.9 If you want to pause/cancel a running program or add laundry:

·

symbol key allows you to pause

or restart the selected program. When

you want to add laundry, you can use

this function.

· Touch symbol button for this. If is displayed on the screen, you
can open the loading door and add laundry.

· If is displayed on the screen, the step where you can add laundry has passed.
· If you want to cancel a running program, turn the program knob to “CANCEL” position. Your machine will stop washing process and the program will be cancelled. To drain the water in the machine, turn the program knob to any program position. Your machine will drain the water and cancel the program. You can select a new program and start the machine.

6 7
If any button is pressed or selected programme is changed by the programme dial while the child lock is active, the “CL” symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a programme is running, when the programme dial is turned to the “Off” position and another programme is selected the previously selected programme continues from where it was left.
To deactivate the child lock, press and hold button 6 and 7 simultaneously for at least 3 seconds until the “CL” symbol on
EN – 20

5.10 Program End
Your machine will automatically stop when the selected program ends. · “End” will appear on the electronic
display. · You can open the door and take
out the laundry. After taking out the laundry, leave the door open so that the inside of the machine can dry. · Turn the program knob to CANCEL position. · Unplug the machine. · Turn off the water tap.
EN – 21

6. PROGRAMME TABLE

Washing temperature (°C)
Maximum dry laundry amount
(kg) Detergent compartment Programme duration (Min.)

Programme

Laundry type / Descriptions

COTTON

*60 – 90

ECO 40-60
COTTON PreWash
COTTON 20

40 – 60
60 – 40 – 30 “- -C”
*20- “- -C”

COLOURS WOOL RINSE
ALLERGY SAFE

40 – 30 – “- -C”
30 – “- -C”
”- -C” 60 – 40 – 30 –
“- -C”

Spin/Drain

*”- -C”

HAND WASH
Easy Care / Outdoor
Duvet

30 – “- -C” 40 – 30 – “- -C” *40 – 30 – “- -C”

Jeans / Dark Garments

*30 – “- -C”

(**) FAST 60′ 60°C (***) Rapid 15 ‘

60 – 40 – 30 “- -C”
30 – “- -C”

9,0

2 228

Very dirty, cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 4,5 kg), bedclothes, etc.)

Dirty cotton and flax textiles. (Underwear,

9,0

2 164 linen, tablecloth, towel (maximum 4,5 kg),

bedclothes, etc.)

9,0 1&2 96

Dirty cotton and flax textiles. (Underwear, linen, tablecloth, towel (maximum 4,5 kg),
bedclothes, etc.)

Less dirty, cotton and linen textiles.

4,5

2 225

(Underwear, bedsheet, tablecloth, towel

(max.2,0 kg) bedcloth, etc.)

Less dirty, cotton and linen textiles.

3,5

2

43

(Underwear, bedsheet, tablecloth, towel

(max. 4,5 kg) bedcloth, etc.)

2,5

2

30

Woollen laundries with machine wash labels.

9,0

–

197

Provides an additional rinse to any type of laundry after the washing cycle.

4,0

2

17

Baby laundry

You can use this program for any type

of laundry if you want an additional spin

step after the washing cycle./ You can

use the drain program to drain the water

9,0

–

90

accumulated inside the machine (adding or remov ing laundry). To enable the drain

program, turn the program knob to the

spin/drain program. After you select “spin

cancelled” using the auxiliary function key,

the program will start to run.

2,5

2 110

Laundry recommended for hand wash or sensitive laundry.

Very dirty or synthetic-mixed textiles. (Nylon

3,5

2 110 socks, shirts, blouses, synthetic-including

trousers etc. )

–

2 103

For washing a fibre duvet with a machine washable label. (max. 2.5 kg)

Black and dark items made of cotton, mixed

fibre or jeans. Wash inside out., Jeans often

3,5

2

96

contains excess dye and may run during

the first few washes. Wash light and dark

coloured items separately

4,0

2

60

Dirty, cotton, coloured and linen textiles washed at 60°C in 60 minutes.

In a short time of 15 minutes, Lightly soiled,

2,0

2

15

cotton, colored and linen textiles your can

NOTE: PROGRAMME DURATION MAY CHANGE ACCORDING TO THE AMOUNT OF LAUNDRY, TAP WATER, AMBIENT TEMPERATURE AND SELECTED ADDITIONAL FUNCTIONS.
() Washing water temperature of the programme is the factory default. () If your machine has the rapid wash auxiliary function, you can enable the quick wash option on the display panel and load the machine with 2 kg or less laundry to wash it in 30 minutes. () Due to the short washing time of this programme, we recommend that less detergent is used. The programme may last longer than 15 minutes if your machine detects an uneven load. You can open the door of your machine 2 minutes after the completion of a washing operation. (The 2 minute period is not included in the programme duration). According to regulation 1015/2010 and 1061/2010, the programme 1 and the programme 2 are respectively the Standard 60°C cotton programme’ and the Standard 40°C cotton programme’. The Eco 40-60 programme is able to clean normally soiled cotton laundry declared to be washable at 40°C or 60°C, together in the same cycle, and that this programme is used to assess the compiance with the EU ecodesign legislation.

· The most efficient programmes in terms of energy consumption are generally those that perform at lower temperatures and longer duration.
· Loading the household washing machine up to the capacity indicated by the manufacturer for the respective programmes will contribute to energy and water savings.
· Program duration, energy consumption and water consumption values may vary according to wash load weight and type, selected extra functions, tap water and ambient temperature.
· It’s recommended to use liquid detergent for the washing programmes at low temperature.
· The amount of detergent to be used may vary depending on the amount of laundry and the level of dirtiness of the laundry. Please follow the detergent manufacturers’ recommendations for the amount of the detergent to be used.
· The noise and remaining moisture content are influenced by the spinning speed. The higher spinning speed in the spinning phase, the higher noise and the lower remaining moisture content.
· You can access the product database where the model information is stored by reading the QR code on the energy label.

Energy Consumption
kWh/cycle

Programme Duration Hours:Minutes

Water Consumption
Litres/Cycle

max. Temperature
°C

Remaining Moisture Content
%
1000 Rpm

Programme Name Rated
Capacity kg

1/4 Load Rated
Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load
Rated Capacity 1/2 Load 1/4 Load

1/2 Load

1/4 Load Rated
Capacity

1/2 Load

Rated Capacity

90

Cotton Cotton

60

Eco 40-60

Outdoor

Cotton Fast 60 Easy Care /

9 2,4 9 1,34

03:13 03:50

84

81

62%

57

57

62%

9 1,30 0,71 0,32 03:48 02:54 02:54 57 48 36 50 36 23 62% 62% 62%

3,5 0,57 4 1,11 4,5 0,21

01:50 01:00 01:36

50

42

71%

35

58

62%

52

20

62%

EN – 24

20

6.1 Important Informations · Use detergents, softeners and other additives suitable for automatic washing
machines only. Excessive foam has occurred and automatic foam absorption system has been activated due to too much detergent usage. · We recommend that periodic cleaning for washing machine every 2 months. For periodic cleaning please use Drum Clean programme. If your machine do not have Drum Clean programme, use Cottons-90 programme. When required, use limescale removers manufactured specifically for washing machines only. · Never force the door open when your Washing Machine is running. You can open the door of your machine 2 minutes after the completion of a washing operation. · Never force the door open when your Washing Machine is running. The door will open immediately after the washing cycle has ended. · The installation and repairing procedures should always carried out by the Authorised Service Agent in order to avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons. (*) Specifications may vary depending on the machine purchased.
EN – 25

7. CLEANING AND MAINTENANCE
7.1 Warning

7.2 Water Inlet Filters Water inlet filters prevent dirt and foreign materials from entering your machine. We recommend that these filters are cleaned when your machine is unable to receive sufficient water, although your water supply is on and the tap is open. We recommend that you clean your water inlet filters every 2 months.

Turn your mains power supply off and remove the plug from the socket before carrying out maintenance and cleaning of your machine.
Turn off the water supply before starting maintenance and cleaning of your machine.
CAUTION: Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaning agents to clean your Washing Machine. They may damage the plastic surfaces and other components with the chemicals they contain.

· Unscrew the water inlet hose(s) from the Washing Machine.
· To remove the water inlet filter from the water inlet valve, use a pair of longnosed pliers to gently pull on the plastic bar in the filter.
· A second water inlet filter is located in the tap end of the water inlet hose. To remove the second water inlet filter, use a pair of long-nosed pliers to gently pull on the plastic bar in the filter.
· Clean the filter thoroughly with a soft brush and wash with soapy water and rinse thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION: The filters at the
water inlet valve may become clogged due to water quality or lack of required maintenance and may break down. This may cause a water leak. Any such breakdowns are out of the scope of the warranty.

EN – 26

7.3 Pump Filter

6. Close the filter cover.

WARNING: The water in the
pump may be hot, wait until it has cooled down before carrying out any cleaning or maintenance.

1

2

(*) Specifications may vary depending on the machine purchased.

7.4 Detergent Drawer

The use of detergent may cause residual

3

4

build up in the detergent drawer over time. We recommend that you remove the drawer

every 2 months to clean the accumulated

residue.

To remove the detergent drawer:

· Pull the drawer forwards until it is fully extended.

5

6

The pump filter system in your Washing Machine prolongs the life of the pump by preventing lint from entering your machine. We recommend that you clean the pump filter every 2 months.

The pump filter is located behind the cover on the front-lower right corner.

To clean the pump filter:

1. You may use the washing powder spade

(*) supplied with your machine or liquid

detergent level plate to open the pump cover.

· Press the region shown below inside the detergent drawer you have pulled

2. Lodge the end of the powder spade

all the way back, and continue pulling

or liquid detergent level plate in the

and remove the detergent drawer from

opening of the cover and gently press

its place

backwards. The cover will open.

· Before opening the filter cover, place a container under the filter cover to collect any water left in the machine.

· Loosen the filter by turning anticlockwise and remove by pulling. Wait for the water to drain.
NOTE: Depending on the
amount of water inside the machine, you may have to empty the water collection container a few times.

3. Remove any foreign materials from the

filter with a soft brush.

· Remove the detergent drawer and

4. After cleaning, re-fit the filter by inserting it and turning clockwise.

disassemble the flush stopper. Clean thoroughly to completely remove any softener residue. Refit the flush stopper

5. When closing the pump cover, ensure

after cleaning and check that it is seated

that the mountings inside the cover

properly.

meet the holes on the front panel side.

EN – 27

8. Body / Drum

1

2

·
· Rinse with a brush and lots of water.
· Collect the residues inside the detergent drawer slot so that they don’t fall inside your machine.
· Dry the detergent drawer with a towel or dry cloth and place it back
Do not wash your detergent drawer in a dishwasher. Liquid detergent apparatus() For the cleaning and maintenance of the liquid level detergent apparatus, remove the apparatus from its location as shown in the picture below, and thoroughly clean the remaining detergent residues. Replace the apparatus. Make sure that no residual material remains inside the siphon. () Specifications may vary depending on the machine purchased.

1. Body
Use a mild, non-abrasive cleaning agent, or soap and water, to clean the external casing. Wipe dry with a soft cloth. 2. Drum
Do not leave metallic objects such as needles, paper clips, coins etc. in your machine. These objects lead to the formation of rust stains in the drum. To clean such rust stains, use a non-chlorine cleaning agent and follow the instructions of manufacturer of the cleaning agent. Never use wire wool or similar hard objects for cleaning rust stains.

EN – 28

9. TROUBLESHOOTING
Repair of your machine should be carried out by an authorised service company. If your machine requires repair or if you cannot solve an issue with the information provided below, then you should: · Unplug your machine from the mains power supply.
· Turn off the water supply.

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

Your machine does not start.

Machine not plugged in. Fuses are faulty.
No mains power supply. Start/Pause button not pressed.

Plug machine in. Replace the fuses. Check mains power. Press the Start/Pause button.

Programme dial `stop’ position. Turn the programme dial to the desired position.

The machine door is not completely closed.

Close the machine door.

Water tap is turned off.

Turn tap on.

Water inlet hose may be twisted.

Check water inlet hose and untwist.

Your machine does not intake water.

Water inlet hose clogged. Inlet filter clogged.

Clean water inlet hose filters. () Clean the inlet filters. ()

The machine door is not completely closed.

Close the machine door.

Your machine does not discharge water.

Drain hose clogged or twisted. Pump filter clogged.
Laundry is too tighly packed together in the drum.

Check the drain hose, then either clean or untwist.
Clean the pump filter. (*) Spread your laundry in the machine evenly.

The feet have not been adjusted.

Adjust the feet. (**)

Transit bolts fitted for transportation have not been
removed.

Remove the transit bolts from the machine. (**)

Your machine vibrates.

Small load in the drum. Your machine is overloaded with
laundry or laundry is unevenly spread.

This will not prevent operation of your machine.
Do not overload the drum. Spread laundry evenly in the drum.

Your machine rests on a hard surface.

Do not set up your Washing Machine on a hard surface.

Excessive foam is formed in the detergent drawer.

Excessive amount of detergent used.
Wrong detergent used.

Press the Start/Pause button. To stop the foam, dilute one tablespoon of softener into 1/2 litre of water and pour into the detergent drawer. Press
the Start/Pause button after 5-10 mins.
Only use detergents produced for automatic Washing Machines.

EN – 29

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

Unsatisfactory washing result.
Unsatisfactory washing result.

Your washing is too dirty for the Use the information in the programme tables to

programme selected.

select the most appropriate programme.

Amount of detergent used insufficient.

Use the amount of detergent as instructed on the packaging.

There is too much laundry in your

Check that the maximum capacity for the

machine.

selected programme has not been exceeded.

Hard water.

Increase the amount of detergent following the manufacturer’s instructions.

Your laundry is too tightly packed together in the drum.

Check that your laundry is spread out.

As soon as the machine is loaded with water, water
discharges.

The end of water drain hose is too Check that the drain hose is at a suitable height.

low for the machine.

(**) .

No water appears in the drum during washing.

No fault. Water is in the unseen part of the drum.

. . . . . . . . . . . . . . . . . . . . .

Laundry has detergent residue.

Non-dissolving particles of some detergents may appear on your
laundry as white spots.

Perform an extra rinse, or clean your laundry with a brush after it dries.

Grey spots appear on the laundry.

There is untreated oil, cream or Use the amount of detergent as instructed on the

ointment on your laundry.

packaging in the next wash.

The spin cycle does not take place or takes place later than expected.

No fault. The Unbalanced load control system has been activated.

The Unbalanced load control system will try to spread your laundry. The spinning cycle will begin
once your laundry is spread. Load the drum evenly for the next wash.

(*) See the chapter regarding maintenance and cleaning of your machine. (**) See the chapter regarding installation of your machine.
10. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by a combination of flashing wash operation lights. The most common failure codes are shown below.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>