Paslode 16GA Straight Finish Nailer User Guide
- August 15, 2024
- Paslode
Table of Contents
Paslode 16GA Straight Finish Nailer
Product Specifications
- Model: Cordless 16GA Straight Finish Nailer
- Drives Up To: 12,000 Nails Per Charge
- Nail Types: Paslode 16GA Straight Nails Only
- Finish Fuel: Paslode #816007
- Depth of Drive Adjustment: Yes
FAQ
Frequently Asked Questions
- Q: What should I do if the tool is not driving nails properly?
- A: Check that the nail strip is loaded correctly and that the depth of drive is properly adjusted. If issues persist, contact customer support.
- Q: How often should I clean the tool?
- A: Regular cleaning is recommended to maintain optimal performance. Refer to the cleaning procedure manual for detailed instructions.
- Q: Can I use nails other than Paslode 16GA Straight Nails?
- A: It is recommended to use only Paslode 16GA Straight Nails for this tool to ensure proper functionality and safety.
STOP: Read instructions before operating tool!
Battery
Charge Battery Before Using Tool
Nails
Use Paslode 16 Ga. Straight Finish Nails
Length | Part # |
---|---|
1- 1/4″ | 650282 |
1- 1/2″ | 650283 |
2″ | 650285 |
2- 1/2″ | 650287 |
- Slide Nail Strip Into Rear of Magazine
- Pull Follower Back
- Release Follower Behind Nail Strip
Finish Fuel
Part #816007 Drives Up To 1,200 Nails
-
Use Paslode #816007 Finish Fuel
-
Check Date On Bottom Of Fuel
-
Open Fuel Door By Pushing The Door Forward, Then Lifting It Back
-
Lift Fuel Arm
-
Insert Fuel Cell
-
Position Fuel Arm
-
Close Fuel Door
WARNING
- Always wear EYE and EAR protection whenever working with or in the vacinity of a cordless tool in operation.
Drive Nails
- Push Tool Down On Its No Mar Probe
- Pull The Trigger
Adjusting The Depth Of Drive
Rotate Thumbwheel To Adjust Depth Of Drive
Clearing Nail Jam
- Remove Battery, Fuel, And Nails
- Pull Quick Clear Latch Forward To Release
- Open Front Guide To Release Jam
- Return Driver Blade
- Close And Latch Front Guide
ALWAYS REMOVE BATTERY, FUEL AND NAILS BEFORE CLEARING A JAM
CONTACT
For assistance call this number for all your questions.
- USA
- 1-800-222-6990
- 7:00 AM-4:45 PM CST
WARNING: Do not attempt to operate or clean this tool until you have read and understood all safety precautions and cleaning procedure manual instructions. [Failure to follow all safety precautions and instructions may result in a permanent loss of vision, serious personal or even fatal injury, property damage and/or tool damage.]
© 2024, Illinois Tool Works Inc
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>