gosuna WP9 Smart Power Strip User Manual
- June 3, 2024
- gosuna
Table of Contents
gosuna WP9 Smart Power Strip
Since the device only supports 2.4G Wi-Fi connection, please ensure that the mobile phone and the device are connected to 2.4G Wi-FI slmultaneously.
Product Overview
- VO Flame Resistant Material
- Socket Panel
- USB Ports
- ON/OFF Button
- Air Circuit-Breaker
Note : ON/OFF button can also be used as a factory reset button- simply press and hold the button. Only do this if you want to erase the socket’scurent settings.
Parts Included
- Smart Power Strip x1
- Usar Manual x1
- Binding Voice Assistants Guide x1
Specification
- Input : 110-240V, 10A Max.
- Output : 10A
- AC Fraquency : 50/60Hz
- Wi-Fi Frequency : 2.4GHz
- Maximum Power Output : 1200W120V
Main Features
How to Download the Gosund App
- Option 1 : Search for “Gosund” in the Apple APP Store or Google Play.
- Option 2 : Scan the QR code to enter the download page.
How to Pair with the Our App
- Open the APP and create your account.
- Turn on the plug and put it close to the router when pairing.
- Press and hold the ON/OFF button for 5 seconds and release it when the plug starts blinking fast to enter the network pairing mode.
Warnings and Precautions
Important!
- Keep it out of the rsach of children and pets.
- Do not use this product in humid environments or outdoors.
- Do not place this product near heating devices, such as microwave ovens, or radiators.
- Protect the product from extreme temperatures, direct sunlight, strong jolts high humidity, moisture, flammable gases, vapors and solvents
- Do not dissesemble, modify, or repair your device
- Please ask help from the authorized profsesionals for device malfunction.
- Do not use the device when it is no longer working properly or visibly damaged
- Do not store the device for extended periods in poor ambient conditions
- Never use aggresaive detergents such as rubbing alcohol or other chemical solutions because thes ecould damage the casing or even impair the functioning of the product.
- Do not cover the product when in use
- No voltage only when unplugged
FCC STATMENT
FCC Caution : Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radioTV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. FCC ID: 2/APUZ-WP9
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>