Rebel RB-5016 Pressure Washer User Guide

: August 15, 2024
: Rebel

Table of Contents

Rebel RB-5016 Pressure Washer
OVERVIEW
SAFETY INSTRUCTIONS
OPERATION
CLEANING AND MAINTENANCE
TROUBLESHOOTING
SPECIFICATION
LEARN MORE
FAQ
DECLARATION OF CONFORMITY
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Rebel RB-5016 Pressure Washer

OVERVIEW

Handle
Hook for power cord
Power switch
Power cord
High pressure hose lock release switch
Output hole for high pressure hose
Wheel
Gun mount
High pressure hose release button
Gun

SAFETY INSTRUCTIONS

In order to reduce the injuries or damages, follow basic safety precautions applied when using any electrical device, including the following:

Read the entire instruction manual before you start installation and assembly and keep it for future reference. Keep the manual for future reference.
Before connecting the device to power supply socket, make sure the voltage indicated on the device corresponds to the voltage in the power supply socket.
Place the device on stable, flat ground
Clean this device in accordance to instructions listed in Cleaning and maintenance section.
ALWAYS turn off the device and disconnect it from the mains supply:
- if it’s not operating correctly
- if there’s an uncommon voice when using
- before disassembling the device
- before cleaning
- when not in use
When you disconnect the power cord of the device, grasp and pull the plug, not the cord/cable.
Fixed power cable may only be replaced in an authorized service point.
Turn off the device by rotating power switch before disconnecting the power cord.
Keep the device out of the reach of children. Only adult persons should use the pressure washer.
Keep the device and its cord/cable away from heat, water, moisture, sharp edges and any other factor which may damage the appliance or its cord.
Do not carry the pressure cleaner by the cord or hose.
Do not pull the cord over sharp edges and do not slam in by the door.
Make sure the plug does not bump into people, animals or objects when winding the cord.
Do not step on the hose or crush it.
Do not place the appliance in water or any liquid.
Do not point hose or tube at people or animals.
Do not use the device to clean animals or people.
Do not use the product for purposes different from displayed in this operating manual.
Do not leave the appliance unattended when it’s working.
Producer of this product is not responsible for damages caused by inappropriate handling and using of the device.
DO NOT use this device if the cord or the plug is damaged, or the appliance is broken.
Do not use the device if any accessory is damaged or leaky.
Do not use the device at very low temperatures (below 0ºC)
Do not attempt to repair this device yourself. Only authorized and qualified personnel may repair this device. Never disassemble this device.
During work, use personal protection equipment. Always wear safety eye protection when using this pressure washer
When working with delicate materials, do not bring the nozzle too close to the surface to be cleaned.
After working with the device, roll up the power cord and place it on the hook.

OPERATION

Connect extension wand with gun. To do this, insert the lance plug into the output hole of the gun and turn clockwise until the element locks into place.
Connect a lance with an adjustable nozzle to the extension lance in the same way. To change the shape of the water jet, turn the nozzle.
Connect a high-pressure hose to the gun. Insert the hose plug into the hole located at the bottom of the gun near the trigger. A clicking sound will be heard after proper installation. To release the hose, press the hose release button and pull out the hose.
Connect the other end of the high pressure hose to the outlet port located on the front of the unit. A clicking sound will be heard after proper installation. To release the hose, slide the hose lock release switch and pull out the hose.
Screw the input adapter to the water input hole on the back of the device, and then use the quick coupler to connect the water hose to it.
Connect the power cord to the power supply socket.
Switch power switch to “ON” position.
To trigger the ejection of water from the gun, press the trigger located in its handle. At the bottom of the pistol’s handle is the pistol trigger lock switch. To lock the trigger, move the lock switch to the position marked with the padlock icon.
Before each use of the washer, it should be bleeded, as there may be air in the system. To do this, after installing accessories, connect the hose with water and press the trigger of the gun. The entire operation should be carried out after making sure that the power switch is set to the OFF position.

CLEANING AND MAINTENANCE

Before cleaning, rotate the power switch and unplug the device from the AC outlet.
Then disconnect the water supply hose to the washer.
Remove the input adapter and clean it.
When the device is disconnected from the water source, high pressure will be maintained in the gun. Before removing the gun, point it at an empty space and squeeze the trigger.
- After disassembling the connected accessories, dry them.
Store the device at temperatures above 0ºC.

TROUBLESHOOTING

Problem	Cause	Solution
Motor does not run when the power switch is set to the ON position	Electrical
socket does not work	Check plug, socket, fuses
Socket voltage is inadequate	Check voltage in socket
Power cord is not plugged in	Plug power cord
The pump does not reach adequate pressure	Water inlet is clogged	Remove and

clean adapter
Pump is drawing air| Check inlet connection / bleed system
Suction valves are clogged

/ worn

| Clean or replace valves
Diameter of garden hose is too small| Replace the hose with another with a diameter of ¾ inch.
The water supplied to the washer has too low pressure| Check the water supply hose for leaks / Open the water supply hose valve fully
Pressure cleaner makes excessive noise| Intake is blocked| Check the patency of the intake valves
Valves are worn , dirty or clogged| Check intake valves
Filter is dirty| Check adapter filter
The motor stops running while in use| Net voltage is lower than suggested| Check the voltage at the power socket

SPECIFICATION

Power	1800 W
Rated pressure	100 bar (max 140 bar)
Rated flow	360 l / h
Max. water supply pressure	1,2 MPa
Max. water temperature	50ºC
Power supply	220 – 240 V AC , 50 / 60 Hz
Dimensions	353 x 290 x 781 mm
Weight	7,5 kg
In set	gun, lance with adjustable nozzle, hose, input adapter with filter
Sound pressure level (LPA)	79 dB (A), K= 3 dB (A)
Sound power level (LWA)	90 dB (A), K= 3 dB (A)
Hand-arm vibration	ah 2,5 m/s2 K=1,5 m/s2

LEARN MORE

For more information on this device visit: www.rebelelectro.com.
Read owner’s manual carefully before using your device.
Visit www.rebelelectro.com website for more products and accessories.

Correct Disposal of This Product
(Waste Electrical & Electronic Equipment

(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.

FAQ

Q: Why is my motor not working even though the power switch is on?
- A: Possible causes could be that the electrical outlet is not functioning, the voltage is incorrect, the power cord is not plugged in, or the water inlet is blocked.
Q: How do I clean and maintain the pressure washer?
- A: Refer to the cleaning and maintenance section in the instruction manual for detailed instructions on how to clean and maintain your pressure washer.