Bodypoint PC Series Midline Joystick Mounting Kits Instruction Manual

Bodypoint PC Series Midline Joystick Mounting Kits

Specifications

• Product Name: Midline Joystick Mounting Kits
• Art Numbers: PC202, PC205, PC206, PC207
• Manufacturer: Bodypoint, Inc.
• Warranty: Limited lifetime warranty against defects in workmanship and materials

Product Usage Instructions

Installation:

1. Turn off the wheelchair’s electrical system before installation.
2. Identify the components in the package.
3. Follow the specific instructions for each component for proper installation.

Maintenance:

1. Annually check the PC024 Rotating Shaft for lubrication by sliding back the rubber protective boot and applying medium-viscosity PTFE (Teflon) bearing grease.
2. No maintenance is necessary on other components.

Periodic Safety and Performance Checks:

1. Periodically check the product for function and signs of wear to ensure user safety.
2. If the product does not function correctly or shows significant wear, stop using it and contact your supplier for qualified repair or replacement by Bodypoint.

Disposal:

1. Product can be disposed of safely without special precautions at the end of its useful life.

Frequently Asked Questions

• Q: What should I do if I encounter a serious incident related to the product?
  • A: Report any serious incidents related to the product to the manufacturer (Bodypoint, Inc.) and the local Competent Authority.
• Q: How can I claim a warranty for the product?
  • A: Contact your supplier or Bodypoint for warranty claims as the product carries a limited lifetime warranty against defects in workmanship and materials.
• Q: Can the Midline Arm be adjusted to fit different lengths?
  • A: Yes, the Midline Arm can be cut to length using a hacksaw or tube cutter for customization.

Product Information

These instructions provide important information for the safe use and maintenance of all Bodypoint Midline Joystick Mounting Kits. Give these instructions to the user or their caregiver and review them to ensure that they are understood.CAUTION! Turn off the wheelchairs’ electrical system before installation. WARNING! If a serious incident occurs related to the use of this product, it should be reported to the manufacturer (Bodypoint, Inc.) and the local Competent Authority.
MAINTENANCE: To ensure smooth rotation, the PC024 Rotating Shaft should be checked annually for lubrication by sliding back the rubber protective boot (sleeve), as shown in these instructions. Apply a small quantity of medium- viscosity PTFE (Teflon) bearing grease to the slot, and slide the rubber protective boot back into place. No maintenance is necessary on other components.
PERIODIC SAFETY AND PERFORMANCE CHECKS: To ensure user safety, this product must be checked periodically for function and signs of wear. If the product does not function correctly or if significant wear is found, stop using it and contact your supplier for qualified repair or replacement by Bodypoint. Under no circumstance should this product be altered or repaired by unqualified persons — health and safety depend on it!
SCRAP/DISPOSAL: Product is made of materials that can be disposed of safely without special precautions at the end of its useful life.
WARRANTY: This product carries a limited lifetime warranty against defects in workmanship and materials arising under normal use by the original consumer. Contact your supplier or Bodypoint for warranty claims.

PACKAGE CONTENTS

The package may contain one or more of the following:

• Joystick Mounting Clamp
• Tri-Lock™ Rotating Shaft
• Midline Arm
• Joystick Mounting Adapter
• Quick Release Lever (Optional) or a complete joystick Mounting Kit. Art PC202-, PC205-, PC206-, PC207-

JOYSTICK MOUNTING CLAMP

Joystick Mounting Clamps can be installed on the right or left side. Attach clamp to armrest. Position the clamp as far forward as possible and tighten.

TRI-LOCK™ ROTATING SHAFT

Tri-Lock Rotating Shaft is compatible with right or left side mounting. Rotate Shaft in Mounting Clamp to ensure correct positions of rotation. The Flip-stop allows conversion from non-locking to locking. 0° horizontal position becomes locked. Press end to unlock.

MIDLINE ARMS

JOYSTICK MOUNTING ADAPTERS

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>