Chenya H5MAX Bluetooth Earphone User Guide
- August 16, 2024
- Chenya
Table of Contents
H5MAX Bluetooth Earphone
Wireless name: TWS
Wireless version: V5.3+BR+EDR
Battery specifications: Earphones 30 Mah
Support modes: a2dp/avctp/avdtp/avrcp/hfp/spp/spp/smp/att/rap/gatt/rf-
comm/sdp/L2cap
Sensitivity: -90dBm
Signal distance: = 10 meters (in an ideal environment without any large
obstacles)
Play time: approximately 4 hours
Call time: approximately 5 hours
Standby time: approximately 40 hours
Charging time: Charge the charging case for about 1.5 hours, and the charging
case charges the headphones for about 1 hour
The charging compartment charges the earphones approximately 6 times per ear
Functional operation instructions
-
Power on
Take out the earphones from the charging compartment and turn them on automatically, or press and hold the left/right earphone multifunction button for 3 seconds to turn them on. -
Shutdown
Put the earphones into the charging compartment and close the top cover to automatically shut them off, or press and hold the left/right earphone multifunction button for 5 seconds
Both left and right earphones will be turned off simultaneously. -
Power on reconnection
After successful pairing, the Bluetooth earphones will first enter the reconnection state and automatically reconnect when turned on for the second time Connected phones. -
Play/Pause
In music playback standby mode, clicking the left/right earphone multifunction key can directly play Music can be paused by clicking the left/right earphone multifunction button during playback. -
Switch songs/volume up/down/enable Siri
When playing music, double-click the multifunctional button on the earphones to increase or decrease the volume. Press and hold the earphone multifunction button for two seconds to switch Change up and down. Three strikes enable Siri -
Answer incoming calls
When a phone call is made, clicking the left and right earphone mul- tifunction keys can answer the call. -
Call hanging up
When making a phone call, clicking the left and right earphone multi- function keys can hang up the call. -
Call rejection
When a phone call is made, long press the left and right earphone multifunction buttons for 2 seconds to reject the call.
matters needing attention
If the headphone signal cannot be searched? (The light will only turn off
after connecting the phone)
Please check if the headphones are turned on, as there will be a flash- ing
indicator light when the headphones are turned on.
Can’t two headphones play music at the same time?
Check if both headphones are turned on, and if there is a prompt sound when
manually pressing and holding the power button.
After turning on the device, wait for the headphones to automatically complete
pairing within 30 seconds. After successful pairing, only one of the
headphones will have a light Blink, then open the phone connection.
This product does not support fast charging devices. Please do not use fast
charging devices for charging.
After charging, please unplug the charging cable in a timely manner.
Multilingual manuals
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>