Pelgrim IK1064F Induction Hobs Installation Guide
- August 14, 2024
- Pelgrim
Table of Contents
Pelgrim IK1064F Induction Hobs
Preparations for installation
The fitting of the appliance should only be carried out by a registered qualified installer. Please read the safety regulations.
Pictograms used
Important information
Electrical connection
Free space around appliance
A (mm) C (mm) D (mm)
min. 650 min. 450 min. 40
This appliance must be earthed
The electrical connection must comply with national and local regulations.
Connected load
| L1 (W)| L2 (W)| L3 (W)| Total load (W)
---|---|---|---|---
IK1064F| 3500| 3250| | 6750
IK2064F| 3400| 3700| | 7100
IK2084F| 3400| 3700| | 7100
| A (mm)| B (mm)| C (mm)| D (mm)
---|---|---|---|---
IK1064F| 600| 520| 50| 54
IK2064F| 600| 520| 52| 56
IK2084F| 770| 520| 52| 56
| L1 (W)| L2 (W)| L3 (W)| Total load (W)| E ( >mm
---|---|---|---|---|---
IK1064F| 560| 600| 490| 40| 50
IK2064F| 560| 600| 490| 50| 52
IK2084F| 710| 600| 490| 50| 52
Placing sealing tape
Electrical connection
Hi
2-2N 230V 50Hz – 2x 16A
2 phases – 2 neutral
only NL/alleen NL
2N 380-415V 50/60Hz – 2x 16A
2 phases – 1 neutral
Lo
1N 220-240V 50/60Hz – 1x 16A (Lo) ****
1 phase – 1 neutral
Lo (1x16A) – > Switch on power limiter:
Within 2 minutes of connecting the appliance to the electric power press all 4
cooking zone selection buttons (C) simultaneously. Keep these pressed down for
at least 3 seconds.
‘Hi’ will appear in the display. Push the ‘-‘ or ‘+’ button and select ‘Lo’ in
the display.
Again press all 4 selection buttons (C) and keep these pressed for at least 3
seconds. ‘Lo’ is active now!
Consult the wiring diagrams on the back of the appliance/Make the required connections on the connecting block.
Ventilation
Step : 1
Step : 2
Step : 3
Step : 4
Documents / Resources
|
Pelgrim IK1064F Induction
Hobs
[pdf] Installation Guide
IK1064F, IK1064F Induction Hobs, Induction Hobs, Hobs
---|---