Vtech 570400 IM Save the Day Response Center Instruction Manual

: August 14, 2024
: vtech

Table of Contents

Vtech 570400 IM Save the Day Response Center
Product Usage Instructions
FAQ
INTRODUCTION
INCLUDED IN THE PACKAGE
INSTRUCTIONS
LABEL APPLICATION
ASSEMBLY INSTRUCTIONS
ACTIVITIES
MELODY LIST
SONG LIST
CARE & MAINTENANCE
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Vtech 570400 IM Save the Day Response Center

Save the Day Response Center™

Specifications:

Includes: One SmartPoint™ Community Service Police Car, One Mini Fire Chief Car, One Mini Rescue Helicopter, One Roadblock, Two Traffic Cones, One Car Lift Base, One Second Floor Base, One Car Lift Roof, Three White Pillars SmartPoint™, One SmartPoint™, One Helipad, Lift & Launcher, Parking Area Support, Two Helipad Pillars, One Fire Station Gate, Two Middle Pillars, One Slide Track, One Traffic Light, One Slide Support, One Flip-Up Gate
Battery Requirement: 2 AAA (AM-4/LR03) batteries (not included)

Product Usage Instructions

Battery Removal And Installation:

Make sure the unit is turned OFF.
Find the battery cover located on the bottom of the Police Car, use a screwdriver to loosen the screw and then open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure.

Assembly Instructions:

Parking Area and SmartPoint™ Lift & Launcher and Three White Pillars(A,B,C):

Insert the SmartPoint™ Lift & Launcher into the SmartPoint™ Parking Area. Insert the three White Pillars into the slots. The pillars will click when connected.
Insert the Two Pillars and the Car Park Gate into the slots. A clicking sound will confirm they are connected.

Assemble and attach the Lift Roof and the Second Floor Base:

Attach the Lift Roof to the Second Floor Base, then connect both to the base unit’s pillars.

Assemble and attach the Two Helipad Pillars and the Helipad Big Support:

Insert Two Helipad Pillars into the Second Floor Base.
Insert the Helipad Support into the Second Floor Base. Insert the Helipad on top.

Assemble and attach the Slide Track, Flip-Up Gate and Traffic Light:

Insert the Slide Support into the Slide Track. Connect the Slide Track to the Second Floor Base.
Insert the Flip-Up Gate and Traffic Light onto the Slide Track.

Assemble and attach the SmartPoint™ plate and the Base with two supports:

Put the Car Lift SmartPoint™ Plate into the two Car Lift Base supports. A clicking sound will confirm they are connected securely. Connect the completed Car Lift to the SmartPoint™ Parking Area. If the plate comes off the base, simply reattach the plate again.

FAQ

Q: Is adult assembly required for battery installation?

A: Yes, adult assembly is required for battery installation. Keep batteries out of reach of children.

INTRODUCTION

Thank you for purchasing the VTech® Go Go Smart Wheels® Save the Day Response Center™. Race to the rescue with the SmartPoint™ Community Service Police Car, Mini Rescue Helicopter, and Mini Fire Chief Car. It’s time to get moving!

INCLUDED IN THE PACKAGE

WARNING

All packing materials such as tape, plastic sheets, packaging locks, removable tags, cable ties, cords and packaging screws are not part of this toy, and should be discarded for your child’s safety.

NOTE

Please save this manual as it contains important information.

If there are no locks inside the package, disregard this message. Removing the Packaging Locks:

Turn the packaging locks anticlockwise several times.
Pull out the packaging locks and discard.

INSTRUCTIONS

WARNING:

Adult assembly required for battery installation. Keep batteries out of reach of children.

Battery Removal And Installation

Make sure the unit is turned OFF.
Find the battery cover located on the bottom of the Police Car, use a screwdriver to loosen the screw and then open the battery cover.
Remove old batteries by pulling up on one end of each battery.
Install 2 new AAA (AM-4/LR03) batteries following the diagram inside the battery box. (For best performance, alkaline batteries or fully charged Ni-MH rechargeable batteries are recommended).
Replace the battery cover and tighten the screw to secure.

MPORTANT: BATTERY INFORMATION

Insert batteries with the correct polarity (+ and -).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc) or rechargeable \batteries.
Only batteries of the same or equivalent type as recommended are to be used.
Do not short-circuit the supply terminals.
Remove batteries during long periods of non-use.
Remove exhausted batteries from the toy.
Dispose of batteries safely. Do not dispose of batteries in fire.

RECHARGEABLE BATTERIES

Remove rechargeable batteries (if removable) from the toy before charging.
Rechargeable batteries are only to be charged under adult supervision.
Do not charge non-rechargeable batteries.

LABEL APPLICATION

Please stick the labels to the play set as shown below:

ASSEMBLY INSTRUCTIONS

With the Go! Go! Smart Wheels® Save the Day Response Center™, safety comes first. To ensure your child’s safety, adult assembly is required.

Following the steps below: Assemble and attach the SmartPoint™ Parking Area and SmartPoint™ Lift & Launcher and Three White Pillars(A,B,C)
- A. Insert the SmartPoint™ Lift & Launcher into the SmartPoint™ Parking Area. Insert the three White Pillars into the slots. The pillars will click when connected
- B. Insert the Two Pillars and the Car Park Gate into the slots.
- A clicking sound will confirm they are connected
Assemble and attach the Lift Roof and the Second Floor Base following the steps below: Attach the Lift Roof to the Second Floor Base, then connect both to the base unit’s pillars.
Assemble and attach the Two Helipad Pillars and the Helipad Big Support following the steps below:
- A. Insert Two Helipad Pillars into the Second Floor Base.
- B. Insert the Helipad Support into the Second Floor Base. Insert the Helipad on top.
Assemble and attach the Slide Track, Flip-Up Gate and Traffic Light following the steps below:
- A. Insert the Slide Support into the Slide Track. Connect the Slide Track to the Second Floor Base.
- B. Insert the Flip-Up Gate and Traffic Light onto the Slide Track
Assemble and attach the SmartPointTM plate and the Base with two supports following the steps below:
- A. Put the Car Lift SmartPoint™ Plate into the two Car Lift Base supports. A clicking sound will confirm they are connected securely. Connect the completed Car Lift to the SmartPoint™ Parking Area. If the plate comes off the base, simply reattach the plate again.

Once you’ve completed the above steps, you are ready to play! You can connect the Save the Day Response Center to other Go! Go! Smart Wheels® play sets and tracks (each sold separately).

PRODUCT FEATURES

On/Off Switch
To turn the unit On, slide the On/Off Switch to the On position. To turn the unit Off, slide the On/Off Switch to the Off position.
Automatic Shut-Off
To pr eserve battery life, the Go! Go! Smart Wheels® Community Service Police Car will automatically power-down after approximately 60 seconds without input. The unit can be turned on again by pressing the light up face button, opening the Hood, rolling the car quickly or triggering a SmartPoint™ location.
Note: This product is in Try-Me mode in the packaging. After opening the package, turn the Community Service Police Car off and on again to proceed with normal play. If the unit repeatedly powers down while playing, please install a new set of batteries.

ACTIVITIES

Community Service Police Car

Press the Light-Up Face Button to hear fun phrases, songs, sounds and melodies. While a melody is playing, continue pushing the Community Service Police Car to add fun sounds on top of the melody. The Light-Up Face Button will flash along with the sounds.
Push the Community Service Police Car to hear fun sounds and phrases. The Light-Up Face Button will flash along with the sounds.
Open and close the hood to hear fun sounds and phrases. The Light Up Face Button will flash along with the sounds.
Place the Community Service Police Car on one of the play set’s three SmartPoint™ locations to see the Police Car’s lights flash and to hear fun sounds, short tunes and phrases. The Police Car even interacts with other Go! Go! Smart Wheels® play sets (other play sets sold separately).

Rescue Center

Place the Community Service Police Car or any SmartPoint™ vehicle (each sold separately) on any of the 3 SmartPoint™ locations to trigger fun sounds, songs or phrases.
Put the Community Service Police Car on the SmartPoint™ Lift & Launcher, then lift the launcher to send the Police Car racing.
Move the Flip-Up Gate to let the Community Service Police Car slide out.
Put the Community Service Police Car on the SmartPoint™ Car Parking to rest or wait for the next emergency.
Put the Community Service Police Car on the SmartPoint™ Car Jack to jack up the car for fun role play.

MELODY LIST

Jack Be Nimble
London Bridge
My Bonnie Lies Over the Ocean
Old King Cole
Red River Valley
Take Me Out to the Ball Game

SONG LIST

Song 1
When you’re in trouble, I’m on the way,
Flashing my bright lights and saving the day.
Song 2
The siren is a signal that I’m coming to help.
Song 3
Go! Go! Smart Wheels
I’m a Go! Go! Smart Wheels Police Car
Always ready to help. (Go! Go!)
I am on duty twenty-four.
Let’s Go! Go! and see (Go! Go!)
Song 4
Being friendly and kind helps me do my job just fine.

CARE & MAINTENANCE

Keep the unit clean by wiping it with a slightly damp cloth.
Keep the unit out of direct sunlight and away from any direct heat sources.
Remove the batteries if the unit will not be in use for an extended period of time.
Do not drop the unit on a hard surface and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions, please follow these steps:

Turn the unit Off.
Interrupt the power supply by removing the batteries.
Let the unit stand for a few minutes, then replace the batteries.
Turn the unit On. The unit should now be ready to play again.
If the unit still does not work, install a new set of batteries.

IMPORTANT NOTE:

If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com and filling out our Contact Us form located under the Customer Support link. Creating and developing VTech products is accompanied by a responsibility that we take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to contact us with any problems and/or suggestions you might have. A service representative will be happy to help you.

CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
vtechkids.com

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: