DIEHL Metering RAY FS WP Energy Meters Installation Guide
- August 14, 2024
- DIEHL Metering
Table of Contents
DIEHL Metering RAY FS WP Energy Meters
Product Specifications:
- Product Name: RAY FS WP / WS Energy Meters
- Models Available: FS WP, FS WS
- Pressure Range: 10 / 16 / 40 bar max.
- Current Consumption: max. 100mA at 24V
Product Usage Instructions
Installation Guide:
- Ensure you have the correct model (FS WP or FS WS) based on your requirements.
- Refer to the installation manual for specific DN sizes and quantities for each model.
Flow Sensor Placement:
- Proper placement of the flow sensor is crucial for accurate readings.
- For FS WP, install according to the recommended DN size and quantity.
- For FS WS, follow the DN size and quantity guidelines provided in the manual.
Power Supply:
Connect the energy meter to a power source with a maximum current consumption of 100mA at 24V.
Maintenance:
- Regularly check the energy meter for any signs of damage or wear and tear.
- Ensure that the pressure does not exceed the specified maximum range to prevent damage to the meter.
Frequently Asked Questions (FAQ):
Q: What is the maximum pressure range for the RAY FS WP / WS energy
meters?
A: The maximum pressure range for these energy meters is 10 / 16/ 40 bar.
Q: What is the recommended current consumption for proper functioning of
the energy meters?
A: The energy meters require a maximum current consumption of 100mA at
24V for proper operation.
Q: How can I contact Diehl Metering GmbH for support or inquiries?
A: You can reach Diehl Metering GmbH at Industriestrasse 13,91522
Ansbach. Phone: +49 981 1806-0, Email: info-dmde@diehl.com,Website:
www.diehl.com/metering.
Installation guide
RAY FS WP / WS
Energy meters
ASSEMBLY INSTRUCTION
EU DECLARATION OF CONFORMITY
Device Type
This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation, insofar as it is applied:
In conformity with the following relevant harmonised standards or normative documents or other technical specifications:
EN 1434-1:2007
EN 1434-2:2007/AC:2007
EN 1434-3:2007
EN 1434-4:2007/AC:2007
EN 1434-5:2007
OIML R75-1:200
OIML R75-2:2002
EN IEC 63000:2018
The contact address marked on the product can be one of the site listed in the module D certificate
EU DECLARATION OF CONFORMITY
Device Type
Type| Technology| No of the EU type examination certificate Nr. der EU- Baumusterprüfbescheinigung Nº du certificat d’examen UE de type
Nr świadectwa badań typu UE
Nº. de certificado de examen UE de tipo (5)
---|---|---
456
457
(WP-XKA)
| Flow Sensor| DE-15-MI004-PTB004
This declaration of conformity is issued under the sole responsibility of the manufacturer. The object of the declaration described above is in conformity with the relevant Union harmonisation legislation, insofar as it is applied:
| 2011/65/EU (OJ L 174, 1.7.2011) | RoHS Directive |
|---|---|
| 2014/32/EU (OJ L 96, 29.3.2014) | Measuring Instruments Directive |
In conformity with the following relevant harmonised standards or normative documents or other technical specifications:
EN 1434-1:2007
EN 1434-2:2007/AC:2007
EN 1434-3:2007
EN 1434-4:2007/AC:2007
EN 1434-5:2007
OIML R75-1:2002
OIML R75-2:2002
EN IEC 63000:2018
Name and address of the manufacturer Name und Anschrift des Herstellers Nom et adresse du fabricant
Nazwa i adres producenta Nombre y dirección del fabricante (8)
| The notified body LNE n° 0071 has carried out the module D certification of quality assurance under number:
certificación D con número: (9)
---|---
DIEHL METERING
Donaustraße 120
90451 Nürnberg GERMANY
|
LNE-36769
The contact address marked on the product can be one of the site listed in the module D certificate
Dr. Christof Bosbach
President of the Division Board
Diehl Metering
Reiner Edel
Member of the Division Board
Finance & Administration
Diehl Metering GmbH
Industriestrasse 13
91522 Ansbach
Phone: +49 981 1806-0
Fax: +49 981 1806-615
info-dmde@diehl.com