COMET S0110E Datalogger Owner’s Manual

: August 14, 2024
: COMET

Table of Contents

COMET S0110E Datalogger
Product Information
Setup and Installation
Data Logging
Data Transfer
Maintenance
Technical data
Frequently Asked Questions
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

COMET S0110E Datalogger

Product Information

Specifications

Model : Datalogger – thermometer with display
Code : S0110E
Temperature Sensor Measuring Range : Not specified
Accuracy : Not specifiedCOMET-S0110E-Datalogger-Product
Resolution : Not specified
Operating Temperature : Not specified
Channels : Not specified
Memory : Not specified
Recording Interval: Each 10 seconds
Display and Alarm Refresh : Not specified
Recording Mode : Noncyclic – data logging stops after filling the memory; cyclic – after filling memory oldest data is overwritten by new
Real Time Clock: Year, leap year, month, day, hour, minute, second
Power : Lithium battery 3.6V; size AA
Battery Life : 6 years
Protection Class : IP67
Dimensions : 93 x 64 x 29 mm
Weight (including batteries): Approximately 110g
Warranty : 3 years

Setup and Installation

Ensure the device is powered off before inserting the battery.
Insert a lithium battery (size AA) into the designated slot.
Power on the device and set the real-time clock according to the current date and time.

Data Logging

Set the recording interval as per your requirements (default is every 10 seconds).
Choose the recording mode – noncyclic or cyclic depending on your data storage preference.

Data Transfer

Connect the datalogger to a personal computer using a USB, RS232, GSM, or Ethernet interface with the appropriate adapter.
Transfer the recorded data for further analysis and storage on the computer.

Maintenance

Keep the device clean and free from dust to ensure accurate temperature readings.
Monitor the battery life and replace it when necessary to avoid data loss.

code: S0110E
Temperature datalogger is designed for record of temperature. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter. The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.

For communication with the PC must be from Optional accessories ordered USB adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.

Technical data

TEMPERATURE SENSOR|
---|---
Measuring range| -30 to +70 °C
Accuracy| ±0.6 °C (-30 to +30 °C);
±0.8 °C (+30 to +70

°C)

overwritten by new

Frequently Asked Questions

Q: How can I check the accuracy of the temperature readings?
A: You can refer to the Traceable calibration certificate included with the device for declared metrological traceability based on EN ISO/IEC 17025 standard.

Q: What should I do if I need to control logging without a direct connection to a computer?
A: You can order optional accessories like a USB adapter, COM adapter, or start/stop magnet for controlling logging without a direct computer connection.