COMET WA01083 Mobility Scooter User Manual

COMET WA01083 Mobility Scooter

Product Information

The product code for this rollator is WA01083. The maximum load capacity for this equipment is 136kg and the maximum user weight is also 136kg. It is important not to exceed the weight limit as it could put the user at risk. If the user weighs 130kg, then no more than 6kg can be carried. The rollator has been designed to assist users when walking and carrying small items of shopping using the bag provided. The bag was specifically designed to fit this rollator, and only this bag should be used for this rollator. The rollator features height-adjustable handles, rear wheels, a seat, a backrest, and cane holder, and front wheels.

Product Usage Instructions

Before use, ensure that the rollator has been assembled correctly. Carefully remove all packaging, including the cardboard tubes covering the knurled tube part of the brake assembly. Check the product thoroughly for damage or obvious faults. If you suspect the unit is faulty, do not use it and contact your supplier immediately for service.

To unfold the rollator, follow these instructions:

1. Open the rollator by pulling the handles away from each other.
2. Push down on the seat making sure that the seat arms click into the seat brackets. Do not use the rollator unless the seat arms are fully locked into the seat brackets.
3. Lower the rear legs by pulling up both sides of the red catch and lowering the leg into position. Repeat for the other rear leg. A click will be heard when the leg has locked into place. Do not use the rollator unless the leg has securely locked into place.
4. Lower the front wheels by pushing the red catch down and lowering the wheel into position. Repeat for the other front wheel. A click will be heard when the wheel has locked into place. Do not use the rollator unless the wheel has securely locked into place.

The height of the handgrips can be raised or lowered to suit the user. To adjust the height of the handgrips, press the height adjustment spring button. Raise or lower the handgrips to the desired user height. You will hear a click as the handgrip locks into one of the height adjustment positions. Ensure that both handgrips are at the same height before use. Do not use the rollator unless the handgrips have locked into one of the height adjustment positions.

To operate the brakes:

1. To stop, gently apply a gripping pressure to both brakes simultaneously. This will slow down and stop your rollator.
2. The brakes on your rollator have a park option. To operate the park option, push downwards on both brakes simultaneously. You will feel the brake make a very slight click. Your brakes are now in the ‘lock’ position.
3. To unlock, simply pull up the brake again. You will hear a slight click as the ‘park’ disengages.

N.B. This equipment must be installed by a competent person.
Maximum Load 136kg
Maximum User Weight 136kg
Do not exceed the weight limit stated – doing so could put the user at risk. * For avoidance of doubt if user is 130kg then no more than 6kg can be carried.

BEFORE USE

• Carefully remove all packaging. Avoid using any knives or other sharp instruments as this may damage the surface of the product.
• Check the product for any visible damage. If you see any damage or suspect a fault, do not use your product, but contact your supplier for support.

INTENDED USE

• Rollator has been designed to assist you when walking and carrying small items of shopping using the bag provided. The bag was designed specifically to fit your rollator, please only use the bag supplied for your rollator. Do not use or combine bags and / or baskets from other manufacturers.
• For Indoor & Outdoor Use
• Multiple Users & Multiple Use product

FEATURES

• User friendly loop brakes with lock
• Simple brake cable adjustment
• Soft plastic solid wheels
• Swivelling front wheels
• Folding locking mechanism
• Height adjustable
• Ergonomic handgrips to reduce pressure
• Walking stick holder

ASSEMBLY INSTRUCTIONS

Carefully remove all packaging, including the cardboard tubes covering the knurled tube part of the brake assembly. Check the product thoroughly for damage or obvious faults.

WARNING!
If you suspect the unit to faulty, please do not use, but contact your supplier immediately for service.

• The rollator is supplied fully assembled in its folded position. To unfold the rollator follow these instructions.

Step 1:

• Open the rollator by pulling the handles away from each other (see fig. 1)

Step 2:

• Push down on the seat (see fig. 2) making sure that the seat arms click into the seat brackets (see fig. 3). DO NOT USE THE ROLLATOR UNLESS THE SEAT ARMS ARE FULLY LOCKED INTO THE SEAT BRACKETS.

Step 3:

• Lower the rear legs by pulling up both sides of the red catch (see fig. 4) and lowering the leg into position. Repeat step 3 for the other rear leg. A click will be heard when the leg has locked into place. DO NOT USE THE ROLLATOR UNLESS THE LEG HAS SECURELY LOCKED INTO PLACE.

Step 4:

• Lower the front wheels by pushing the red catch down (see fig. 5) and lowering the wheel into position. Repeat step 4 for the other front wheel. A click will be heard when the wheel has locked into place. DO NOT USE THE ROLLATOR UNLESS THE WHEEL HAS SECURELY LOCKED INTO PLACE.

HEIGHT ADJUSTMENT

The height of the handgrips can be raised or lowered to suit the user.
To adjust the height of the handgrips Press the height adjustment spring button (see fig. 6). Raise or lower the handgrips to the desired user height. You will hear a click as the handgrip locks into one of the height adjustment positions (see fig. 6).
ENSURE THAT BOTH HANDGRIPS ARE AT THE SAME HEIGHT BEFORE USE.
DO NOT USE THE ROLLATOR UNLESS THE HANDGRIPS HAVE LOCKED INTO ONE OF THE HEIGHT ADJUSTMENT POSITIONS.

OPERATING THE BRAKES

1. To stop, gently apply a gripping pressure to both brakes simultaneously (see fig. 7), this will slow down and stop your rollator.
2. The brakes on your rollator have a park option (see fig. 8). To operate the park option, push downwards on both brakes simultaneously. You will feel the brake make a very slight click. Your brakes are now in the ‘lock’ position.
3. To unlock, simply pull up the brake again, you will hear a slight click as the ‘park’ disengages.

BRAKE ADJUSTMENT

Your rollator brake system will require periodic adjustment. To adjust the brakes loosen Nut B and then screw/unscrew Nut A. When adjusted re-tighten Nut B. If further adjustment is required then loosen the Locking Screw and then using a pair of pliers pull the cable down by approximately a millimetre. Re- tighten Locking Screw. The brakes can then be adjusted further by loosening Nut B and screwing / unscrewing Nut A as before (see fig. 9).

REISSUE

If you reissue or are about to reissue this product, please thoroughly check all components for their safety.

This includes:

• Bent or damaged tubes or cracks at the tube joints
• Loose or worn horseshoe clips
• Elongated adjustment holes
• Loose handles
• Loose or worn wheels and wheel fasteners (where fitted)
• Smooth, worn or split ferrules (rubber tips)
• Replace all worn, missing or damaged parts where necessary. If in any doubt, please do not issue or use, but immediately contact your supplier for service support.

CARE AND MAINTENANCE & YOUR OBLIGATION

1. Only use your rollator for the purpose for which it intended, which is as an aid to walking. It is intended your rollator is only used on standard pavements or at home. It should not be used on rough terrain or pot-holed surfaces. The use of your rollator on these surfaces can seriously compromise your safety and may damage your rollator beyond repair.
2.  Keep your rollator clean by wiping down with a damp cloth with a mild detergent. Do not under any circumstances use an abrasive or solvent based cleaner, as this will seriously damage the rollator and void your warranty.
3. Wipe off all surfaces with a dry cloth and use a water dispersing agent such as WD40 on all metal joints.
4. Check that all wheels and the folding mechanism function correctly and that all wheels move freely. Pay particular attention to the front wheels, ensuring that they rotate freely and without obstruction and that they are attached securely to the frame.
   • WARNING!
   • Withdraw your rollator immediately if any of the wheels become difficult to turn or do not feel securely attached to the frame or if you suspect damage or any other fault.
5. Monthly Checks – Check that no components are loose. Check the adjustment to your brakes (fig. 9). Check castors.
6. Do not fit any parts or accessories to your rollator manufactured by another company. To do so will annul your warranty and may seriously compromise your safety.
7. We suggest that you check your rollator visually every day. However we recommend that you should have your rollator serviced every three months or less if used by, or issued to, various users.

MAINTENANCE

Please conduct a safety check of the product at regular intervals or if you have any concerns.

WARRANTY

This product carries a 12 month warranty from the date of purchase against manufacturing defects. Misuse or Damage is not covered. This warranty does not affect your statutory rights.

TECHNICAL SPECIFICATIONS

Documents / Resources

| COMET WA01083 Mobility Scooter [pdf] User Manual
WA01083 Mobility Scooter, WA01083, Mobility Scooter, Scooter
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>