VOLLRATH 5950145 Mirage Induction Drop in Warmers Instruction Manual
- August 13, 2024
- VOLLRATH
Table of Contents
VOLLRATH 5950145 Mirage Induction Drop in Warmers Instruction Manual
Thank you for purchasing this Vollrath equipment. Before operating the equipment, read and familiarize yourself with the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging. Use this packaging to ship the equipment if repairs are needed.
SAFETY PRECAUTIONS
To ensure safe operation, read the following statements and understand their meaning. This manual contains safety precautions which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or can cause
severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or can cause
minor or major personal injury if the caution is ignored.
NOTICE: Notice is used to note information that is important but not hazard-related.
To reduce risk of injury or damage to the equipment:
- Plug only into grounded electrical outlets that match the voltage on the rating label.
- This equipment requires a dedicated circuit.
- Do not use extension cords, power strips or surge protectors with this equipment.
- Unplug this equipment from the wall outlet when not in use.
- Use this equipment only in a flat, level position.
- To protect against electrical shock do not immerse the cord or plug in water. Keep the cord away from heated surface. Do not let the cord hang over the edge of table or counter.
- As a precaution, persons using a pacemaker should stand back 12″ (30 cm) from an operating unit. Studies have shown that the induction element will not disrupt a pacemaker.
- Keep all credit cards, driver licenses and other items with a magnetic strip away from an operating unit. The unit’s magnetic field will damage the information on these strips.
- The heating surface is made of a strong, non-porous material. However, should it crack or break, stop using and immediately unplug the unit. Cleaning solutions and spills could penetrate the broken cook-top and create a risk of electrical shock.
- Do not operate this equipment with a damaged cord or plug or if it is not functioning properly.
- Do not operate unattended. Closely supervise units operating in public areas and/or around children.
- Do not place any objects inside the air intake or exhaust panels.
- Do not attach any accessory objects to this equipment.
FUNCTION AND PURPOSE
This equipment is intended to hold heated prepared food at serving temperatures. It is intended for use in commercial food service operations only. It is not intended for household, industrial or laboratory use. This equipment is designed to work with a maximum of one induction-ready chafer or serving vessel.
Suitable Induction-Ready Serving Vessel
- Flat base measuring 4¹⁄₂” (11.4 cm) to 10¼” (26 cm) wide
- Ferrous stainless steel
- Iron
- Cast iron
Unsuitable Vessel
- Base less than 4¹⁄₂” (11.4 cm)
- Pottery, glass, aluminum, bronze or copper cookware
- Cookware with any type of footed base
Register your product atVollrath.com/registration and become eligible to win a free 10″ Vollrath Tribute © fry pan.
FCC STATEMENT
INSTALLATION
Before you begin
-
Download the specification sheet for your drop-in from Vollrath.com. You will need to refer to this document for dimensions, clearance, venting and power requirements.
-
Verify the proper electrical outlet is available at the installation site.
NOTICE: This equipment requires a dedicated circuit.
NOTICE: Using a voltage other than the nameplate rated voltage will cause damage to the unit. Incorrect voltage, modification to the power cord or electrical components can damage unit and will void the warranty. -
Know the countertop manufacturer’s requirements for preparing and installing equipment into the countertop prior to starting installation.
Prepare the Countertop and Cabinet
NOTICE: Refer to the drop-in specification sheet for cutout dimensions, air
flow and venting requirements, minimum clearance distances and environment
requirements.
NOTICE: Countertop materials require specific preparation. Refer to the
countertop manufacturer for instructions regarding proper installation of
equipment into the material.
NOTICE: Exposed wood or particle board edges must be sealed with an
appropriate waterproofing material. Seal the edge between the glass and the
countertop with silicone or similar material. Failure to do so may result in
damage to the countertop.
- Cut required openings in the countertop and cabinet.
- Clean debris from the cut out area(s).
- Reinforce the countertop support as needed per the countertop manufacturer guidelines and the weight of the equipment.
Mount the Drop-in
- Choose a flat, level countertop for the mounting surface.
- Measure the area for the cutout, including the countersink area. The unit is designed to be countersunk. The depth of the surface around the cutout must be reduced to allow for the countersink. See the specification sheet.
Mount the Control Box
- Measure the area for the control box cutout.
- Apply sealant to the space between the control box and the mounting surface to prevent moisture penetration.
- Secure the control box to the mounting surface.
- Plug the USB cable from the control box into the bottom of the range.
FEATURES AND CONTROLS
Control Panel
A On/Off button.
B Power/Temp button. Functional only on the range. No function on the
warmer.
C Timer button. Starts the timer.
D Control knob. Selects the power level (1-5).
E ºF and ºC LEDs. Functional only on the range. No function on the
warmer.
F Display panel. Displays the power level, or an error code.
G Timer LED. Illuminates when timer function is operating.
OPERATION
WARNING
Electrical Shock Hazard
Keep water and other liquids from entering the inside of the equipment.
Liquid inside the equipment could cause an electrical shock.
CAUTION
Burn Hazard
Do not touch hot food, liquid or heating surfaces while equipment is heating
or operating.
NOTICE: Do not preheat empty cookware. Because of the speed and efficiency
of the induction range, cookware can very quickly overheat and be damaged.
NOTICE: Do not drop cooking utensils or other objects onto the cooking surface. The strong, non-porous surface will break. The warranty does not cover this type of abuse.
NOTICE: Do not leave an empty pan on an operating unit.
NOTICE: Do not heat sealed cans or containers as they may explode.
Turn on the Induction Warmer
Press and release
Adjust the Power Level
Rotate the control knob.
- Clockwise increases the power level.
- Counterclockwise decreases the power level.
Keep Food Warm
NOTICE: Monitor food temperature closely for food safety. The United States
Public Health Service recommends that hot food be held at a minimum of 140 ºF
(60 ºC) to help prevent bacteria growth.
NOTICE: Do not add cold food to rethermalizing or hot food.
Place a maximum of one induction-ready serving vessel containing cooked food preheated to above 155 ºF (68 ºC) in the center of the warmer.
The display should remain constant during operation. If the display is flashing, see the Troubleshooting section in this manual.
Removing the vessel from the warming surface for more than ten minutes will cause the unit to automatically turn off. Removing the vessel for less than ten minutes will not interrupt operation.
Use the Timer
- Press and release . The timer LED will flash.
- Rotate the control knob to set the time in full minutes (1-180).
- When the timer cycle is complete, the warmer turn off.
- To cancel the timer, press .
CLEANING
To maintain the appearance and increase the service life, clean your induction range daily.
WARNING
Electrical Shock Hazard
Do not spray water or cleaning products. Liquid could contact the electrical
components and cause a short circuit or an electrical shock.
CAUTION
Burn Hazard
Allow equipment to cool before moving or cleaning.
NOTICE: The cooking surface remains hot even when this equipment is turned off.
NOTICE: Do not use abrasive materials, scratching cleansers or scouring pads to clean the equipment. These can damage the finish.
- Press and release ****.
- Unplug the cord from the wall outlet.
- Allow the equipment to cool.
- Wipe the exterior with a clean damp cloth.
- Thoroughly wipe off any mild soap or chemical cleaners.
NOTICE: Residue could corrode the surface of the unit.
TROUBLESHOOTING
SERVICE AND REPAIR
Serviceable parts are available on Vollrath.com.
To avoid serious injury or damage, never attempt to repair the unit or replace a damaged power cord yourself. Do not send units directly to The Vollrath Company LLC. Please contact Vollrath Technical Services for instructions.
When contacting Vollrath Technical Services, please be ready with the item number, model number (if applicable), serial number, and proof of purchase showing the date the unit was purchased.
WARRANTY STATEMENT FOR THE VOLLRATH CO. L.L.C.
This warranty does not apply to products purchased for personal, family or household use, and The Vollrath Company LLC does not offer a written warranty to purchasers for such uses.
The Vollrath Company LLC warrants the products it manufactures or distributes against defects in materials and workmanship as specifically described in our full warranty statement. In all cases, the warranty runs from the date of the end user’s original purchase date found on the receipt. Any damages from improper use, abuse, modification or damage resulting from improper packaging during return shipment for warranty repair will not be covered under warranty.
For complete warranty information, product registration and new product announcement, visit www.vollrath.com.
The Vollrath Company, L.L.C. Headquarters
1236 North 18th Street Sheboygan, Wisconsin 53081-3201 USA
Main Tel: 800-624-2051 or
920-457-4851
Main Fax: 800-752-5620 or
920-459-6573
Canada Customer Service: 800-695-8560
Tech Services:
techservicereps@vollrathco.com
www.vollrath.com
Pujadas
Ctra. de Castanyet, 132 P.O. Box 121 17430 Santa Coloma de Farners (Girona) –
Spain
Tel. +34 972 84 32 01
info@pujadas.es
Vollrath of China
Vollrath Shanghai Trading Limited
23A, Time Square Plaza | 500 Zhang Yang Road Pudong, Shanghai 200122
Tel: 86-21-50589580
Vollrath de Mexico S. de R.L. de C.V.
Periferico Sur No. 7980 Edificio 4-E Col. Santa Maria Tequepexpan 45600
Tlaquepaque, Jalisco | Mexico
Tel: (52) 333-133-6767
Tel: (52) 333-133-6769
Fax: (52) 333-133-6768
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>