konnected GDOv2-S Smart Garage Door Opener Accessory Installation Guide
- June 1, 2024
- Konnected
Table of Contents
konnected GDOv2-S Smart Garage Door Opener Accessory
Product Information
Specifications
- Model: N%%(((
- Manufacturer: Unknown
- Material: Not specified
- Dimensions: Not provided
- Weight: Not specified
Product Usage Instructions
Power On/Off
To power on the product, press and hold the designated power button for a
few seconds. To power off, repeat the same step.
Functionality
The product is designed for a specific purpose. Refer to the user manual
for details on how to use its features effectively.
Maintenance
Regularly clean the product with a soft, damp cloth. Avoid using harsh
chemicals or abrasive materials that may damage the product.
Troubleshooting
If you encounter any issues with the product, refer to the troubleshooting
section of the user manual or contact customer support for assistance.
FAQ
-
Q: What should I do if the product doesn’t turn on?
A: Ensure that the product is charged or connected to a power source. If the issue persists, contact customer support for further assistance. -
Q: How do I clean the product?
A: Use a soft, damp cloth to gently wipe the surface of the product. Avoid using harsh chemicals that may damage the product’s finish. -
Q: Can I use this product for outdoor activities?
A: It is recommended to check the user manual or product specifications to determine if the product is suitable for outdoor use.
Make your garage door opener smart!
The Konnected Garage Door Opener retrofits an older garage door opener,
letting you open or close it and know if it’s open in real-time with your
favorite smart home app. Works with most garage door opener models with dry-
contact wall button
Kit Contents
- Smart Garage Door Opener
- Power Adapter
- Hook-Up Wire
- Mounting Screws
- Wall sticker
WARNING
To reduce the risk of injury to persons—
- Only install this product on a sectional garage door.
- Do not use this device with one-piece doors or swinging doors.
- Use only with garage door openers manufactured after 1993 with a functional obstruction sensor (beam).
- Do not disable the built-in audible and visual pre-closing warning.
IMPORTANT SAFETY INSTRUCTIONS
- Read and follow these instructions.
- Unplug all devices during installation to avoid the risk of electric shock and unwanted garage door movement.
- Do not install in a wet or damp location or allow to be exposed to moisture or weather.
- Secure all wires and cables to prevent them from falling in the path of the moving garage door or vehicles.
- When using a ladder, follow all warnings to avoid injury.
- Affix the warning sticker near the garage wall button.
AUTOMATE SMART
This product provides the capability to automate the opening and closing of
the garage door, potentially providing ingress to your home. YOU MUST EXERCISE
CAUTION and due diligence when implementing such automations. ALWAYS
THOROUGHLY TEST ALL AUTOMATIONS and ensure that the device’s sensor is
correctly and consistently reporting the state of the garage door.
STEP 1: Initial Setup
Connect to Wi-Fi
Connect your new GDO to Wi-Fi before installing it in the garage. Power on the
device by plugging in the included power adapter. Using a smart phone or
computer, connect to the WiFi network:
garage-door-xxxxxx
if the Wi-Fi connection page doesn’t open automatically, then open your
browser and go to:
http://192.168.4.1
Select your Wi-Fi network and enter your password:
Find it Online
Download and install the Konnected app to easily discover and set up your GDO.
You can also go to the device’s IP address directly (without needing the Konnected app) by finding it in your router’s app. Go to Add New Device from the app menu to search for the device on your network.
STEP 3: Physical Setup
Check Wi-Fi Signal in Garage Move the device into the garage and plug it in.
Tap Open Web Page to see the internal web interface of the Konnected GDO. Scroll down to WiFi Signal % to see the signal strength. Ensure that the signal strength is at least 50% for best results.
Choose a Mounting Location
Close the garage door, move the car out of the way, and find a location on the
ceiling of the garage where you will mount the device.
Choose a location so that if you are standing directly underneath the
Konnected GDO looking up, and the garage door is opened, the rolled-up garage
door will completely block view of the device.
Choose a location that’s at least 2ft away (0.6m) from any track, chain, beam
or support.
Make sure the power plug cord and hookup wire is long enough to reach a ceiling outlet and the garage door opener motor before mounting the device!
Connect the Control Wire
Unplug the garage door opener before you begin!
Optional: Connect Wired Sensor
If desired, you can use a wired contact sensor (sold separately) or limit
sensor (may be installed on your garage opener) instead of or in addition to
the built-in optical sensor.
Power It Up!
Plug in the Konnected GDO and the garage door opener unit.
Calibrate Optical Laser Sensor
Use the Konnected app or the device’s internal web page to calibrate the
optical sensor. The sensor calibration should be the distance between the
device and the garage door when it’s open.
The sensor works best when there’s less than 5ft from the top of the garage
door to the ceiling.
Test Opening and Closing
Use your smart home app or the device’s internal web page to test the open and
close functions and check that the door status is read correctly.
By default, the device uses the built-in optical laser sensor to determine the opened/closed status of the garage door. To use a different detection method, adjust the firmware configuration in the Konnected app. An audible & visual warning will activate for 5 seconds before the Konnected device triggers the garage door to close. This is a required safety feature and cannot be disabled.
STEP 2: Platform Setup
Cloud Setup
Integration with SmartThings and Alexa is provided by the free Konnected
Cloud service. Use the Konnected app to sign up for Konnected Cloud.
Get the App
Configure the Device
Tap Settings to configure your device for Konnected Cloud. Then follow the steps in the app to update the device firmware.
SmartThings
In the SmartThings app, tap the + icon and Add device > Partner device > By brand > Konnected Follow the steps to link your Konnected Cloud account to SmartThings
amazon alexa.
Install the Konnected skill for Alexa from the Alexa Skills store. Follow the steps to link your Konnected Cloud account to Alexa.
Local Setup
After connecting your GDO to WiFi, Home Assistant should discover it
automatically. Open Home Assistant (mobile app or web interface) and look for
New devices discovered in the Notifications pane.
The GDO uses the built-in ESPHome integration. If it’s not automatically discovered, go to Settings › Devices & Services > Add Integration > ESPHome to add it manually by IP address.
Now you can find the device named Garage Door Opener in Settings > Devices &
Services > Devices. The main control is the Garage Door entity. Tap Add To
Dashboard for easy access.
Calibrate the optical sensor in the Configuration section.
Customization
There are two ways to customize the settings of your new GDO. Use the
Konnected App to customize and update your GDO firmware using our service that
builds ESPHome configs for you!
Or, install the ESPHome Dashboard Add-on for Home Assistant and adopt your
device.
Check our support site for ESPHome config tips.
Install the driver for the Konnected GDOv2-S using Hubitat Package Manager
Or download and import the GarageDoorOpenerGDOv2S.zip file from our open-
source drivers on GitHub: https://github.com/konnected-io/konnected-
hubitat/releases Next, in Hubitat got to Devices > Add a device. Then choose
Virtual.
Fill in a Device Name. The Device Network Id should be auto-populated for you. Select Konnected Garage Door GDOv2-S from the Type drop-down. It will appear at the bottom of the drop-down under the User heading.
Find the IP Address of the device on your local network. You find this in the Konnected App, or by looking in your router’s app or for a device named garage-door-XXXXX or konnected-XXXXXX. Enter the IP address in the device’s Preferences section and Save Preferences.
After saving the IP Address, Hubitat will connect to your device and
automatically populate states! Your Garage Door Opener is ready to install and
use. Tap the Calibrate button when the garage is open to
calibrate the optical laser sensor.
Statement Regarding FCC / IC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this product not authorized by Konnected could
void the electromagnetic compatibility (EMC) and wireless compliance and
negate your authority to operate the product. Exposure to radio frequency
energy. The radiated output power of this device meets the limits of FCC/IC
radio frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s
body.
Contains FCC ID: 2AC7Z-ESPS3MINI1
Contains IC: 2AC7Z-ESPS3MINI1
Konnected MODEL: GDOv2-S
Limited Warranty
Konnected warrants this product against defects in material or workmanship for
a period of 1 year following the initial purchase and delivery of the product.
However, Konnected does not warrant that this
product, when used together with software and/or services provided by
Konnected (collectively, “Products and Services”) are defect- or error-free,
or that the operation of the Products and Services will be
uninterrupted or 100% available. The Products and Services rely in part on
factors outside Konnected’s control, including the transmission of data
through your Wi-Fi network, third-party cloud services, third- party open
source software packages, self-hosted smart home controllers, mobile devices,
and internet access. These factors may result in the Products and Services
being unreliable or unavailable.
Konnected does not warrant that the products and services will meet all of
your requirements or be compatible with your equipment. Except as expressly
stated in this section, to the maximum extent permitted under applicable law,
Konnected is providing and licensing the Products and Services as is without
warranty of any kind, either express or implied, including, but not limited
to, the implied warranties of merchantability, title, non-infringement, and
fitness for a particular purpose.
Limitation of Liability
This device enables an end-user to monitor and control their garage door or
motorized gate remotely over an IP network and/or the internet via a mobile
app provided by Konnected and/or 3rd party smart home platform or ano and/or a
device API. You accent that risks are associated with this and that you and/or
the end-user will bear all the risks related to using Konnected Products &
Services. Konnected, its
directors, officers, agents, partners, and licensors shall not be liable to
you or the end-user for any loss or damage of any kind, including but not
limited to personal or bodily injury (including death or disability) or
property damage resulting from the use of these Products and Services.To the
maximum extent permitted by applicable law, in no event will Konnected, its
directors, officers, agents, suppliers, and licensors be liable to the user
(whether in contract, tort (including negligence) or otherwise) for any
indirect, incidental, consequential, special, punitive, or exemplary damages,
including without limitation lost profits, lost business opportunities, loss
of use of the service offering, loss of goodwill, business interruption, loss
of data, lost savings, or other economic damage, arising out of this agreement
or the use or inability to use the device, software or documentation, even if
Konnected or a dealer authorized by Konnected had been advised of the
possibility of such damages.
Privacy
Konnected values your privacy and we give you options to use our products
without providing any personal information. Konnected Cloud is an optional
cloud service that connects your device to third-party
smart home platforms. To use Konnected cloud you must provide basic personal
information so that we can identify your account. You can use this product
without providing any personal information by opting to use local platform
integrations that do not require a Konnected Cloud account.
Terms of Use and Privacy Policy
Your use of the Products and Services is governed by Konnected’s Terms of Use
and Privacy Policy, located at konnected.io/terms and konnected.io/privacy.
| Input voltage | 5-24 VDC (12V recommended) |
|---|---|
| AUX output voltage | Same as input (pass-through) |
| Sensor IN | For an unpowered ordinary switch, magnetic contact, or limit switch |
| DOOR control | Normally open dry contact relay |
| STR +/- | Switchable output; same as input voltage. 2A max current |
| Optical sensor | Eye-safe class 1 laser |
| USB port | Micro-USB connector |
https://support.konnected.io
Email: help@konnected.io
https://community.konnected.io
Proudly designed, assembled and tested in the USA from components sourced
globally.
Copyright © 2024 Konnected Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>