renkforce 3024543 8 Port USB-B 3.2 Gen 2 Hub Instruction Manual
- August 12, 2024
- renkforce
Table of Contents
- renkforce 3024543 8 Port USB-B 3.2 Gen 2 Hub
- 8 Port USB-B 3.2 Gen 2 Hub (10 Gbps)
- Operating Instructions for download
- Intended use
- Delivery contents
- Description of symbols
- Safety instructions
- Connection
- Cleaning and care
- Disposal
- Technical data
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
renkforce 3024543 8 Port USB-B 3.2 Gen 2 Hub
8 Port USB-B 3.2 Gen 2 Hub (10 Gbps)
Item no: 3024543
Operating Instructions for download
Use the link www.conrad.com/downloads (alternatively scan the QR code) to download the complete operating instructions (or new/current versions if available). Follow the instructions on the web page.
Intended use
The product is a USB-B to 8x USB-A port hub with independent ON/OFF buttons and status LED for each USB-A port. The product is powered by the included power adaptor. The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided under all circumstances. If you use the product for purposes other than those described, the product may be damaged. Improper use can result in short circuits, fires, electric shocks, or other hazards. The product complies with the statutory national and European requirements. For safety and approval purposes, you must not rebuild and/or modify the product. Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions. All company names and product names are trademarks of their respective owners. All rights reserved. USB4®, USB Type-C®, and USB-C® are registered trademarks of USB Implementers Forum.
Delivery contents
- Product
- Power adaptor
- USB-C® to USB-B cable
- Operating instructions
Description of symbols
- The following symbols are on the product/appliance or are used in the text:
- The symbol warns of hazards that can lead to personal injury.
- The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
- This product must only be used in dry, enclosed indoor areas. It must not become damp or wet.
Safety instructions
Read the operating instructions carefully and especially observe the safety information. If you do not follow the safety instructions and information on proper handling, we assume no liability for any resulting personal injury or damage to property. Such cases will invalidate the warranty/guarantee.
General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions that remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications, and repairs must only be completed by a technician or an authorized repair center.
Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam, and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
- Do not switch the product on after it has been taken from a cold to a warm environment.
The condensation that forms might destroy the product. Allow the product to reach room temperature before you use it.
Operation
- Consult an expert when in doubt about the operation, safety, or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. The safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to serious transport-related stresses.
Power adapter
Do not modify or repair mains supply components including mains plugs, mains
cables, and power supplies. Do not use damaged components. Risk of death by
electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As a power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
- Never connect or disconnect power adaptors if your hands are wet.
- Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on the plug.
- For safety reasons, disconnect the power adaptor from the main socket during storms.
- Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
- Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
- Unplug the power adapter from the main socket.
- Use a new power adapter of the same design. Do not use the damaged adapter again.
- Ensure that cables are not pinched, kinked, or damaged by sharp edges.
- Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
Connected devices
- Also observe the safety and operating instructions of any other devices that are connected to the product.
Connection
- Connect one end of the included USB cable to the USB 3.2 input on the product, and the other end to an available USB-C® port on your computer.
- Connect one end of the included power adaptor to the DC 12V input on the product, and the other end to a power outlet.
Cleaning and care
Important
- Do not use aggressive cleaning agents, rubbing alcohol, or other chemical solutions. They damage the housing and can cause the product to malfunction.
- Do not immerse the product in water.
- Clean the product with a dry, fibre-free cloth.
Disposal
This symbol must appear on any electrical and electronic equipment placed on the EU market. This symbol indicates that this device should not be disposed of as unsorted municipal waste at the end of its service life. Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose of it separately from unsorted municipal waste. Spent batteries and accumulators, which are not enclosed by the WEEE, as well as lamps that can be removed from the WEEE in a non-destructive manner, must be removed by end users from the WEEE in a non-destructive manner before it is handed over to a collection point. Distributors of electrical and electronic equipment are legally obliged to provide free takeback of waste. Conrad provides the following return options free of charge (more details on our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the ElektroG
End users are responsible for deleting personal data from the WEEE to be disposed of. It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
Product
- Input (DC)………………………………… 12 V/DC, 2 A
- Output (USB-A) ………………………… USB-A (PD) port: 5 V/DC 2.4 A max
- Single USB-A port: 5 V/DC 1.5 A max.
- Total (shared): 5 V/DC 4.0 A max.
- USB ………………………………………… 3.2 Gen 2 max. 10 Gbps 900 MB/s read-write
- Over-current protection………………. yes (input >15 V/DC 5 A)
- Overheat protection…………………… yes (>58 °C)
- Short circuit protection……………….. yes
- Overload protection …………………… yes (upstream current limiting)
- Single port ON/OFF…………………… yes (power and data)
- Port power indicator…………………… yes
- Plug and play……………………………. yes
- Operating temperature ……………… 0 to +40 °C
- Operating humidity …………………… 10 – 90 % RH (non-condensing)
- Storage temperature …………………. -10 to +70 °C
- Storage humidity ………………………. 10 – 90 % RH (non-condensing)
- Dimensions (W x H x D) (approx.) . 136 x 52 x 25 mm
- Weight (approx.) ………………………. 189 g
Power adaptor
- Input ……………………………………….. 100 – 240 V/AC, 50/60 Hz
- Output……………………………………… 12 V/DC, 2 A 24 W
- Cable length …………………………….. approx. 150 cm
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited. This publication reflects the technical status at the time of printing. Copyright by Conrad Electronic SE. *3024543_V3_0624_dh_mh_en 18014399758710411-2 I3/O3 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>