marantz 60n Network Integrated Amplifier User Guide

: August 12, 2024
: Marantz

Table of Contents

marantz 60n Network Integrated Amplifier
Specifications
FAQs
Before you begin
Setup
Playing music – Bluetooth
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

marantz 60n Network Integrated Amplifier

Specifications

Model: 60n
Network Integrated Amplifier
Supports Bluetooth and Wi-Fi functions
Remote Control: RC006PM

FAQs

How do I connect the Model 60n to a wired network?
- If you are connecting Model 60n to a wired network, you need to connect an Ethernet cable between the amplifier and your router. Do not connect the Ethernet cable if you are connecting the amplifier to a wireless network.
What is required for setting up the Model 60n?
- You will need speakers, speaker cables, a mobile device with a Wi-Fi router, an internet connection, and optionally, an Ethernet cable for a wired network connection.

Before you begin

What’s in the box

Required for setup

Optional

Setup

Connect the antennas
Place the antenna squarely over the antenna terminal in the upper-left and upper-right corner of the rear panel.
Turn the antenna clockwise until it is fully connected. Do not over-tighten.
Rotate the antenna upwards for the best possible reception.

  *  **NOTE:** The antennas are required for both Bluetooth and Wi-Fi functions.
  *  **Optional**
    * If you are connecting MODEL 60n to a wired network, connect an Ethernet cable (not included) between the amplifier and your router.
    * Do not connect the Ethernet cable if you are connecting the amplifier to a wireless network.

Connect your speakers
- Connect your speaker cables between the MODEL 60n and your speakers.
Connect TV audio (optional)
Connect one end of the HDMI cable to the TV port labeled “ARC” or “eARC”. The MODEL 60n does not support eARC functionality, however, you can still connect it to an eARC port to use ARC functionality.
Connect the other end of the HDMI cable to the HDMI (ARC) port on the back of the MODEL 60n.

  *  **NOTE:**
    * The TV connection is used to pass audio to the MODEL 60n from your TV’s built-in sources (tuner, smart TV apps, etc.) and HDMI devices connected to your TV. The MODEL 60n does not generate any video output.
    * Make sure the audio output section in your TV settings menu is set to output only 2ch PCM audio. Dolby Digital and DTS audio are not supported.

Connect to power
- Connect the power cable between the MODEL 60n and a wall outlet.
Install batteries in the remote control
- Batteries can be taken out in reversed order.
Turn the MODEL 60n on
- Press the power on/standby button.
Use the HEOS app to complete the MODEL 60n setup
- First time setting up a HEOS Built-in device
1. Go to the Apple App Store, Google Play, or Amazon App Store and search for “HEOS” to download and install.
2. Launch the HEOS app and follow the instructions in the app.

I have set at least one HEOS built-in device on my network

If you already have the HEOS app and have set up at least one HEOS built-in device, please follow the steps below to add the MODEL 60n to your wireless network.

Select the Settings icon in the upper-right corner of the main “Home” menu to display the Settings menu.
Select “Add Device” from the HEOS app’s Settings menu and follow the instructions:

Playing music – Bluetooth

Press Bluetooth to select Bluetooth. When you use it for the first time, the player automatically enters pairing mode.
Activate Bluetooth on your mobile device.
Select “Marantz MODEL60n” from the Bluetooth device list on your mobile device.
Play music using any app on your device.
- To pair with other Bluetooth devices, press and hold Bluetooth on the remote control for at least 3 seconds.

Contact Marantz

1-800-654-6633u
We hope you will enjoy your Marantz product for years to come. If you ever have any questions or need any support, just get in touch via the free helpline. We are happy if you are happy.
In case you can’t reach the helpline please check the support section on www.marantz.com for more information.
Refer to the online manual for other functions, information, and operation procedure details.
manuals.marantz.com/MODEL60n/NA/EN/.

Trademark information

Apple, AirPlay, iPad, iPad Air, iPad Pro, iPhone, and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
The trademark “iPhone” is used in Japan with a license from Aiphone K.K.
Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in the badge and has been certified by the developer to meet Apple performance standards.
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by DEI Sales, Inc. is under license. Other trademarks and trade names are those of their respective owners.
The Wi-Fi CERTIFIED logo is a registered trademark of the Wi-Fi Alliance. Wi-Fi Certification assures that the device has passed the interoperability test conducted by the Wi-Fi Alliance, a group that certifies interoperability among wireless LAN devices.
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress, and HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
App Store® is registered in the U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google LLC.