marantz SR7015 AV Surround Receiver User Guide
- October 30, 2023
- Marantz
Table of Contents
marantz SR7015 AV Surround Receiver User Guide
Welcome
Thank you for choosing a Marantz AV receiver. This guide provides step-by-
step instructions for setting up your AV receiver.
Before You Begin
Required for Setup
TV| 
Speaker cables| 
Speakers
---|---|---
HDMI cable|
Subwoofer cable
Optional
LAN cable
Wi-Fi route
- When connecting this unit to a device that is compatible with the Deep Color, 4K, ARC and eA RC functions, use a “High Speed HDMI cable with Ethernet” that displays the HDMI logo.
- When connecting this unit to a device that is compatible with the 8K and 4K 120Hz video, use a “Ultra High Speed 48 Gbps HDMI cable” that displays the HDMI logo.
- These drawings are for illustrative purposes only and may not represent the actual product(s)
What’s In the Box
Quick Start Guide|
FM indoor antenna
---|---
Safety Instructions|
AM loop antenna
Notes on radio|
Sound calibration microphone
Warranty (for USA / for CANADA)|
Sound calibration microphone stand
Cable labels|
Remote control unit (RC043SR)
Receiver|
R03/AAA batteries
Power cord|
External antennas for Bluetooth / wireless connectivity
- The included sound calibration microphone stand is convenient for use when performing Speaker Calibration. Using your own tripod or the supplied Sound calibration microphone stand enables settings to be automatically configured to the optimum listening environment, providing exceptionally high performance.
Important: External Antennas
The removable external antennas are required for both Bluetooth and Wireless network connectivity. Please make sure to connect the antennas before attempting to use the Bluetooth or Wi-Fi features of the SR7015.
Connecting the external antennas for Bluetooth / Wireless connectivity
For each of the two antennas:
- Place the antenna evenly over the antenna terminal located at the upper left or right corner of the rear panel
- Turn the antenna clockwise until it is fully connected. Do not over tighten.
- Rotate the antenna upwards for the best possible reception.
Setup
There are four steps to the setup process.
- Installing batteries in the remote control unit
- Connecting the receiver
- Following the On-Screen Setup Assistant
- Downloading the Mobile Apps
Installing batteries in the remote control unit
Connecting the receiver
Place the receiver near your TV and connect the power cord
Connect the receiver to your home network
Wired LAN
Connect an Ethernet cable (not included) between your receiver and your
network router
Wireless LAN
When connecting to wireless LAN (Wi-Fi), follow the instructions in
“Connecting the external antennas for Bluetooth / Wireless connectivity” and
connect the antennas.
Connect the receiver to your TV with an HDMI cable
Receiver (Rear panel)
ARC (Audio Return Channel) and eARC (Enhanced Audio Return Channel)
support:
If your TV supports ARC, your TV can send audio back to the AV receiver when
you are using your TV’s built-in video sources (TV tuner, Smart TV streaming
services, etc.) ARC requires that you enable HDMI CEC on your TV. Please refer
to your TV’s Owner’s Manual for instructions on how to setup HDMI CEC. In
addition, if your TV supports eARC, it can also send back high bitrate audio
formats such as Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS:X.
Please refer to your TV’s Owner’s Manual for additional information about
enabling the eARC function.
Turn on the TV
TV remote control unit
Select the appropriate HDMI input on your TV
TV remote control unit
Turn on the receiver
- Press to turn on the receiver.
Verify the connection
- Verify that you can see this screen on your TV.
If this screen is not displayed, please go back and retry the steps again in the recommended sequence.
Following the On-Screen Setup Assistant
Now TV is connected to the receiver. The Setup Assistant will walk you through
connecting and confi guring your speakers and components to your Marantz
receiver. Please use the remote control and follow the on-screen instructions.
Downloading the Mobile Apps
Download both the “HEOS” App and the “Marantz 2016 AVR Remote” App for the full home entertainment experience. The HEOS App is required to access online music through your AVR.
HEOS
The HEOS App allows you to explore, browse, and play music from many online
streaming services or from your own music library.
Marantz 2016 AVR Remote
Control your new AVR with the latest Marantz 2016 AVR Remote App. Volume
control, sound mode selection and advanced settings are always only a tap away
Owner’s Manual
- For more information, visit www.marantz.com
- Refer to the Online Manual for other functions information and operation procedure details.
manuals.marantz.com/SR7015/NA/EN/
Online Manual
Scan the QR code or visit
support.marantz.com/ for setup help, technical
support, warranty assistance, or customer support contact information.
Printed in Vietnam 5411 11830 10AM© 2020 Sound United. All Rights Reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>