ASUS ROG Strix LC III 360 ARGB LCD White Edition User Guide

Table of Contents

Specifications :

Installing the AIO Cooler:
Intel Installation:

A. Install the Intel backplate: Follow the
instructions to install the backplate for Intel sockets.
B. Install the Intel standoff screws:
Depending on the socket type, install the appropriate standoff screws.
C. Install the AIO pump: Securely install the
AIO pump following the provided guidelines.

AMD Installation:

A. Remove the Intel Mounting Bracket: Remove the existing bracket for Intel sockets.
B. Install the AMD Mounting Bracket: Attach the AMD Mounting Bracket as instructed.
C. Remove the pre-installed heatsink mount: Prepare for the installation by removing the heatsink mount.
D. Install the plastic collars and standoff screws: Place the plastic collars and screws for AM4 or AM5 sockets
E. Install the AIO pump: Securely install the AIO pump for AMD sockets following the provided instructions.

Connectivity:

Connect the 9-pin USB 2.0 cable: Plug the cable into the appropriate connector.
Connect the 4-pin fan cable: Connect this cable to the CPU_FAN header, AIO_PUMP header, or W_PUMP+ header.

FAQ :

Q: Are there specific requirements for system compatibility?
A: The ROG STRIX LC III LCD AIO Cooler is compatible with both Intel and AMD sockets, including AM4 and AM5.
Q: Can I use different fans with this cooler?
A: While the package includes ROG STRIX ARGB fans, you may replace them with compatible alternatives if desired.

Q23107
First Edition
January 2024

SEEKING A SOLUTION?
Scan now for assistance

NOTE: The Intel Mounting bracket comes pre-installed on the AIO Cooler.

NOTE : The illustrations in this section are for reference only, but the installation steps remain the same.

Intel

Install the Intel backplate
Install the Intel standoff screws
Install the AIO pump
NOTE : We recommend installing the pump so that the water pipes of the pump face towards the DIMM slots.

AMD

Remove the Intel Mounting Bracket
Install the AMD Mounting Bracket
Remove the pre-installed heatsink mount
Install the plastic collars and standoff screws
Install the AIO pump
NOTE : We recommend installing the pump so that the water pipes of the pump face towards the DIMM slots.
Connect the 9-pin USB 2.0 cable
Connect the 4-pin fan cable
NOTE : The AIO_PUMP and W_PUMP+ headers are set to operate at full speed (PWM 100%) and will cause the pump to operate louder.

NOTE : Display orientation is adjustable through Armoury Crate.

Remove HEX protection caps before installing the radiator

Q: What should I do if a CPU Fan Error error message pops up?
A: Enter BIOS, then go to Monitor and set CPU FAN Speed to [Ignore].

ASUS Guarantee Information

ASUS offers a voluntary manufacturer’s Commercial Guarantee.
ASUS reserves the right to interpret the provisions of the ASUS Commercial Guarantee.
This ASUS Commercial Guarantee is provided independently and in addition to the statutory Legal Guarantee and in no way affects or limits the rights under the Legal Guarantee.
For all the guarantee information, please visit https://www.asus.com/support.

Product Register
Login and register your device for better product support.