Jandy VSFHP130DVS VS Flo Pro Pumps Instructions

Jandy VSFHP130DVS VS Flo Pro Pumps

Product Information

Product Specifications

Product Usage Instructions

Installation and Setup:

1. Ensure the power supply matches the voltage requirements of the pump model.
2. Place the pump on a stable surface near the pool pad.
3. Connect the plumbing using the provided unionized fittings for easy installation.
4. If necessary, adjust the fittings for a secure and leak-free connection.
5. Follow the wiring diagram to wire the pump to the power source correctly.

Maintenance:
To ensure optimal performance and longevity of the pump:

• Regularly check for debris and clean the pump strainer basket.
• Inspect the pump motor for any signs of wear or damage.
• Monitor the pump’s operation and performance regularly.
• Refer to the user manual for specific maintenance schedules and procedures.

Troubleshooting:
If you encounter any issues with the pump, such as unusual noise or reduced flow rate, follow these steps:

1. Check for clogs or blockages in the pump intake and plumbing.
2. Inspect the pump impeller for obstructions or damage.
3. Verify that all connections are secure and there are no leaks in the system.
4. If problems persist, contact customer support for further assistance.

Frequently Asked Questions

Q: Can I use the pump with both 115V and 230V power sources?

A: Yes, Jandy Dual Voltage Series VS FloPro pumps are designed to work seamlessly with both 115V and 230V without requiring rewiring.

Q: How can I adjust the pump fittings for a perfect fit?

A: Utilize the provided unionized fittings for micro-adjustments to ensure a precise drop-in fit on the equipment pad.

Q: What should I do if the pump's performance declines?

A: Check for clogs, inspect the impeller, and ensure proper connections. If issues persist, refer to the troubleshooting section in the manual or contact customer support.

**Why Jandy

**

Why settle for sufficient when you can get superior… With Jandy equipment, you’re getting a product that’s easy to install on most pool pads, compatible with most existing setups, and provides unparalleled performance and efficiency.

• Protecting Your Bottom Line
  We’ve got your back. Our equipment is NOT available for purchase on the Internet. Only through you.

• Drops In with Ease
  Jandy equipment is engineered to easily replace most existing equipment on the pool pad with little to no plumbing adjustments. Jandy is a trade-up, not just a trade-out.

• Built to Last
  Our equipment is designed for durability so you can get the job done and trust that it will perform for the long haul.

• Support You Can Count On
  With our superior customer service and dedicated training team available to you when you need it most, you’ll never be caught off guard on-site.

Why Jandy VS FloPro is the First Choice When Replacing a Pump

• The Right Dimensions
  Jandy VS FloPro pumps include an adjustable base so you can be certain the plumbing lines up to the Pentair® or Hayward® pump you’re replacing.

• Small for Service
  No need to make more room. At just 24.5” long, Jandy VS FloPro pumps take up less space in your truck and on the equipment pad.

• Everything You Need
  VS FloPro pumps include 2” unionized fittings or utilize the 2” internal threads. Using the unionized fittings is recommended as they allow for micro- adjustments for the perfect drop-in fit and make future maintenance easier.

• The Power Play
  Whether the pre-existing pump is wired for 230V or 115V, it doesn’t matter with Jandy “Dual-Voltage” Series VS FloPro pumps. They feature an autosensing, dual-voltage design that allows them to work with both — without having to rewire.

VS FloPro Dual-Voltage Pump Models

Standout Features

• A full-featured variable-speed pump lineup that combines performance with value
• 1.30, 1.65 and 1.85 HP Models
• SpeedSet™ VS Controller Preinstalled
• 2” Unionized Fittings + 2” Internal Threads
• 115V/230V Autosensing Operation

VS FloPro 1.3 HP Pump Curves

VS FloPro™ 1.65 HP Pump Curves

VS FloPro 1.85 HP Pump Curves

Specifications| THP| WEF| Voltage| Max Watts| Amps
---|---|---|---|---|---
VSFHP130DVS| 1.30| 11.0

10.9

| 230V

115V

| 1,100W| 8.6

15.6

VSFHP165DVS| 1.65| 9.0

9.1

| 230V

115V

| 1,700W| 10.5

17.7

VSFHP185DVS| 1.85| 8.2

8.6

| 230V

115V

| 1,875W| 13.5

17.4

VS FloPro Dual-Voltage, 2-Aux Relay Pump Models

Standout Features

• 1.85 And 2.7 HP Models
• SpeedSet™ VS Controller Preinstalled
• 2” Unionized Fittings + 2” Internal Threads
• 115V/230V Autosensing Operation
• Two Programmable Auxiliary Relays
• 4-Speed Dry Contact Relay Control
• Zero-Clearance TEFC Motor Design

VS FloPro™ 1.85 HP Pump Curves

VS FloPro 2.7 HP Pump Curves

Specifications| THP| WEF| Voltage| Max Watts| Amps
---|---|---|---|---|---
VSFHP185DV2AS| 1.85| 8.5| 230V

115V

| 1,700W

1,800W

| 7.5

15.5

VSFHP270DV2AS| 2.70| 7.3

8.7

| 230V

115V

| 2,550W

1,840W

| 10.5

16.0

VS FloPro 3.8 HP, 2-Aux Relay Pump

Standout Features

• 3.8 THP Variable-Speed Pump
• Drop-in Replacement for Pentair® IntelliFlo® VSF 3.95 HP Pump
• SpeedSet™ VS Controller Preinstalled
• 2” Unionized Fittings + 2” Internal Threads
• Two Programmable Auxiliary Relays
• 4-Speed Dry Contact Relay Control
• Zero-Clearance TEFC Motor Design

VS FloPro™ 3.8 HP Pump Curves

VS FloPro 3.8 vs. IntelliFlo VSF 3.95

Specifications| THP| WEF| Voltage| Max Watts| Amps
---|---|---|---|---|---
VSFHP3802AS| 3.80| 6.0| 230V| 3,250W| 16.0

Using the Adjustable Base with Spacers

The small base + spacers are used when replacing a Pentair® WhisperFlo®, IntelliFlo® VSF, or Sta-Rite® Dyna-Glas® pump.

1. Use a cutting tool to remove the spacers from the base.
2. Insert the pins on the spacers into the holes on the base as shown above.

When Replacing

Large Base R-kit part number R0546400 is sold separately. Small base with spacers included with every VS FloPro pump.

Dimension Comparison

Dimension Comparison:
VS FloPro and WhisperFlo/IntelliFlo VSF

Pentair® WhisperFlo®/IntelliFlo® Models and Recommended VS FloPro™ Replacement Models

Dimension Comparison: VS FloPro and Super Pump

Hayward® Super Pump® Models and Recommended VS FloPro™ Replacement Models

Super Pump Model (Single-Speed)| HP| SF| THP| Power| Port Size| Length| Jandy ® **VS FloPro ™ ****Equivalent Models
---|---|---|---|---|---|---|---
SP2600X5| 0.50| 1.20| 0.60| 115V| 1.5″| 23″| **

VSFHP130DVS

SP2605X7| 0.75| 1.00| 0.75| 115V/230V| 1.5″| 23.75″
SP2607X10| 1.00| 1.10| 1.10| 115V/230V| 1.5″| 24″
SP2670007X10| 1.00| 1.10| 1.10| 115V/230V| 1.5″| 24″
SP2610X15| 1.50| 1.00| 1.50| 115V/230V| 1.5″| 25.25″| ****

VSFHP165DVS

SP2670010X15| 1.50| 1.00| 1.50| 115V/230V| 1.5″| 25.25″
SP2621X25| 2.50| 1.00| 2.50| 230V| 2″| 26.25″
SP2615X20| 2.00| 1.00| 2.00| 115V/230V| 2″| 25.75″| VSFHP270DV2AS

Most Super Pump models utilize 1.5″ threaded ports. Use 2″ to 1.5″ slip reducers to utilize the Jandy 2″ unionized fittings for perfect micro adjustments on existing plumbing.

A Fluidra Brand | Jandy.ca | 1.800.822.7933
©2024 Fluidra. All rights reserved. The trademarks and trade names used herein are the property of their respective owners. 99179_SA.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>