VIVOSUN 2500 Submersible Water Pump User Manual
- August 13, 2024
- VIVOSUN
Table of Contents
VIVOSUN 2500 Submersible Water Pump
PRODUCTS INCLUDED IN THIS MANUAL:
Product: SKU
- Submersible Water Pump 40W 332582-40
- Submersible Water Pump 60W 332582-60
- Submersible Water Pump 100W 332582-100
PARTS LIST
- Filter Basket
- Rotor
- Motor Housing
- Motor
- Pump Housing
- Outlet
- Rubber Feet
RATED SPECIFICATIONS
M ODEL
|
POWER
|
H- M AX
|
Q-MAX
---|---|---|---
2500
|
40W
|
8.2 ft.
|
660 gph
3500
|
60W
|
9.2 ft.
|
850 gph
4500
|
100W
| 11 ft.|
1150 gph
HI THERE
Thank you for choosing VIVOSUN for your water pumping needs. Please read these operation instructions and familiarize yourself with the equipment before using the device – this will save you time, energy, and money. Correct and safe use of the system requires strict compliance with the safety instructions. For safety reasons, children and young people under 16 years of age, as well as people that cannot recognize potential hazards, or people that are not familiar with these instructions, should not use this device.
APPLICATIONS
This product is designed for pumping water and can be applied to various situations. It is:
- Suitable for fish tanks, skimming equipment, aquarium landscaping, fountains, waterways, and waterfalls.
- Suitable for seafood holding tanks, aquarium circulation, and drainage.
- Suitable for watering gardens or cleaning equipment.
FEATURES
- This product includes thermal protection against an overheated motor – any abnormal operation caused by overheating will cause the motor to shut off automatically. Principle: Dry running operation will increase motor temperature, then the pump will automatically shut down, but the motor will restart after the temperature goes down, therefore, when the motor automatically turns off due to overheating we must cut off the power immediately. This function can effectively reduce the damage caused by dry running.
- This product uses a uniquely designed motor and pump body structure to reduce noise and power consumption while extending the lifespan of the device.
- Low water level design. The minimum water level should be about 1cm.
- With a bottom suction trainer, this pump is 100% submersible.
- It can pump both fresh water and salt water.
- It uses a ceramic shaft, which increases its longevity.
- The water intake is protected to help ensure that the device does not get clogged.
HOW TO USE
- Place the pump in a suitable location. Please attach the rubber pads to the bottom plate while laying the unit flat on a stable surface to absorb noise and vibration. If you’re concerned about vibration or movement, you can screw the unit to a surface.
- Then connect the pump to a suitable outlet and connect it to the hose.
- Once it is firmly attached, connect the appropriate power supply and the pump will begin to operate.
CAUTIONS
- Before using this pump, please ensure that the rated voltage marked on the nameplate and the actual voltage of your home are compatible.
- This aquarium pump is submersible. Please be sure the equipment is submerged completely in water.
- If the water pump is clogged with anything like mud, garbage, sea salt, etc. Please clean it with clean water before using it again.
- When installing the device, removing, or cleaning the pump, please unplug the pump to ensure your safety.
- If the pump has been in a serious collision, please examine the pump. If it is broken, please discontinue use immediately.
- This pump is not intended to be moved when plugged in or is operating.
- The supply cord cannot be replaced. If the cord is damaged, the device must be disposed of properly.
- The operation temperature range: 40-95°F
MAINTENANCE
- If you do not plan to use the pump for an extended amount of time, please take the pump out of the water and let the pump operate in clean water for 2 minutes, and then clean the pump components with a microfiber cloth and store the pump in a cool, dry place.
- If the temperature is below 0°C, please take the water pump out of the water immediately and discharge the accumulated water so that no excess liquid is inside. Frozen water may damage the pump.
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
What are the dimensions of the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 Submersible Water Pump measures 5.5 inches in length, 3.7 inches in width, and 4.9 inches in height, making it compact and easy to fit into various setups.
What is the maximum flow rate of the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 model has a maximum flow rate of 11 gallons per minute, allowing for efficient water movement in your pond or fountain.
What is the maximum lifting height of the VIVOSUN 2500 Submersible Water Pump?
The maximum lifting height for the VIVOSUN 2500 is 8.2 feet, providing sufficient height for most water features and pond setups.
What power source does the VIVOSUN 2500 Submersible Water Pump use?
The VIVOSUN 2500 model operates using an AC power source, ensuring consistent and reliable performance.
What is the voltage requirement for the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 pump requires a standard voltage of 120 volts, suitable for typical household electrical outlets.
How much does the VIVOSUN 2500 Submersible Water Pump weigh?
The pump weighs 1.7 pounds, making it lightweight and easy to handle for installation and maintenance.
What is the price of the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 Submersible Water Pump is priced at $22.99, offering an affordable option for those needing a reliable water pump.
What material is the VIVOSUN 2500 Submersible Water Pump made from?
The VIVOSUN 2500 pump is typically made from durable plastic materials designed to withstand submersion and continuous operation in water.
What are the primary uses for the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 is suitable for use in fountains, ponds, and small water features where efficient water circulation is required.
Who manufactures the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 Submersible Water Pump is manufactured by VIVOSUN, a company known for producing a range of high-quality home and garden products.
What is the power consumption of the VIVOSUN 2500 Submersible Water Pump?
The VIVOSUN 2500 model has a power consumption of 40 watts, making it energy- efficient for its performance level.
What should I do if the VIVOSUN 2500 Submersible Water Pump stops working?
Check if the pump is properly plugged into a working power source and ensure it’s fully submerged in water. If it still doesn’t work, inspect the pump for clogs or damage. Cleaning or replacing the pump may be necessary.
Why is the water flow from my VIVOSUN 2500 Submersible Water Pump weak?
Weak water flow can be caused by a clogged intake, a dirty filter, or a kinked hose. Ensure the intake and filter are clean and that the hose is not obstructed or kinked.
What should I do if the VIVOSUN 2500 Submersible Water Pump is making excessive noise?
Excessive noise can result from the pump not being fully submerged, debris inside the pump, or vibrations. Add more water to ensure full submersion, clean out any debris, and check if the pump is securely positioned to minimize vibrations.
How can I prevent clogging in my VIVOSUN 2500 Submersible Water Pump?
To prevent clogging, regularly clean the pump’s intake and filter. Keep the pond or water source free of large debris and check for algae buildup that can be drawn into the pump.
VIDEO – PRODUCT OVERVIEW
DOWNLOAD THE PDF LINK:VIVOSUN 2500 Submersible Water Pump User Manual
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>