PHILCO 817 Automobile Radio Installation Guide
- August 17, 2024
- PHILCO
Table of Contents
PHILCO 817 Automobile Radio
Specifications
- Model: 817
- Type: Superheterodyne Automobile Radio Receiver
- Tubes: Three tubes
- Features: Automatic volume control, adjustable antenna stage, tone control
- Speaker: Full-size Philco Electro-dynamic Speaker
- Antenna Compatibility: Roof-type or under-car-type antenna
Installation
- Secure the receiver in place using the provided cardboard template to mark the mounting bolt-hole locations.
- Connect one end to the antenna and the other end to the ammeter binding post.
- Install the control unit on the bottom edge of the instrument board.
Operation
- Turn on the radio by using the power button.
- Adjust the volume using the automatic volume control feature for smooth and consistent sound levels.
- Use the tone control to adjust the audio output according to your preference.
- Select your desired station by tuning the receiver.
Maintenance
- Ensure the speaker panel is easily accessible for servicing tubes and vibrator.
- Keep the receiver shielded and free from motor interference for optimal performance.
FAQs
Q: How do I install the radio in my car?
A: Follow the provided mounting instructions and make sure to connect the
antenna and ammeter binding post.
Q: How do I adjust the volume on this radio?
A: The radio features automatic volume control for smooth and consistent sound
levels.
Q: Can I use this radio with any type of antenna?
A: The radio is equipped with an adjustable antenna stage compatible with
roof-type or under-car-type antennas.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>