BIG LOTS DS-56989 2 Tier Stand Instruction Manual
- June 13, 2024
- BIG LOTS
Table of Contents
Item#
DS-56989
SKU# 000000000
USE AND CARE INSTRUCTION
2 TIER STAND
DS-56989 2 Tier Stand
We have designed our 2 tier stand with you, the customer in mind. Our clear,
easy to follow, step by step instructions will guide you through the project
from start to finish.
Feel confident that this will be a fun and rewarding project.
The final product will be a quality piece of 2 tier stand that will go together
smoothly and give years of enjoyment.
Product are not intended for commercial use.
Customer Service: 1-866-397-9312
Part List
Ltr. | Qty. | Hardware Included |
---|---|---|
E | 10 | Allen Bolts |
F | 2 | Washer |
G | 1 | Allen Wrench |
NOTE: When unpacking, lay the parts on a padded surface such as the
packaging provided.
Be sure to locate all hardware before throwing away any packaging.
Ltr. | Qty. | Components |
---|---|---|
A | 1 | |
B | 1 | ![BIG LOTS DS 56989 2 Tier Stand - Top Tray](https://manuals.plus/wp- |
content/uploads/2023/08/BIG-LOTS-DS-56989-2-Tier-Stand-Top-Tray.jpg)
C| 1|
D| 2|
Assembly
Attaching the Stand Legs
- Place the bottom tray (C) on a soft, flat surface and attached stand leg (D) to bottom tray (C) and align the bolt holes on the bottom tray (C) with the holes on the stand leg (D).
- Loosely secure the stand legs (D) to the bottom tray (C) with bolts (E).
Attaching the top tray
- Attached top tray (B) to stand leg (D) and align the bolt holes on the stand leg (D) with the holes on the top tray (B).
- Loosely secure the stand legs (D) to the top tray (B) with bolts (E).
- Once all of the bolts (E) are in place and the stand assembly is aligned properly, tighten all bolts (E) with the Allen Key (G).
Attaching the handle
- Attached Handle (A) to top of stand legs (D) and align the bolt holes on the stand leg (D) with the holes on the Handle (A).
- Secure the handle (A) to the top tray (B) with bolts (E) and tighten with the Allen Key (G).
Safety & Care Instruction
- To clean, wipe down the wood board and stand using a damp cloth and mild soap and warm water after each.
- Dry immediately with soft cloth.
- Always place product on a solid, level surface.