FRIGIDAIRE FDH30J1 Dehumidifier Owner’s Manual

FRIGIDAIRE FDH30J1 Dehumidifier

Specifications

• Model: FRIGIDAIRE FDH30J1
• Part Number: P/N 327000009 (0011)
• Warranty: Full one-year warranty from purchase date

The FRIGIDAIRE FDH30J1 is a dehumidifier designed to help remove excess moisture from the air, creating a more comfortable environment in your home. It comes with a one-year warranty covering parts and labor.

Product Usage Instructions

• Important Safety Instructions:
  • Before using the dehumidifier, read and save the instructions provided in the owner’s manual. Make sure to record the Model No. and Serial No. of the dehumidifier for future reference.
  • Keep a copy of your bill of sale to establish the warranty period.
• Location:
  • Place the dehumidifier in a location where it can efficiently remove moisture from the air. Avoid blocking the air intake and exhaust areas for optimal performance.
• How It Works:
  • The dehumidifier works by drawing in humid air, cooling it to condense the moisture, and then collecting the water in a bucket or through a drainage system. The dry air is then released back into the room.
• Operating Steps:
  • Plug in the dehumidifier to a power source.
  • Set the desired humidity level using the controls.
  • Turn on the unit and allow it to run until the desired humidity level is reached.
• Dehumidifier Features:
  • The FRIGIDAIRE FDH30J1 comes with features such as adjustable humidity settings, auto shut-off when the bucket is full, and a filter to help clean the air as it dehumidifies.
• Removing Collected Water:
  • To remove collected water, carefully pull out the bucket from the dehumidifier, empty it, and securely place it back into the unit. Ensure the dehumidifier is turned off before removing the bucket.
• Care and Cleaning:
  • Regularly clean the filter to maintain efficient operation. Use a damp cloth to wipe down the exterior of the unit. Avoid using harsh chemicals that may damage the dehumidifier.
• Avoid Service Checklist:
  • Operate the dehumidifier following the instructions provided in the owner’s manual. Use common sense and caution when installing, operating, and maintaining the appliance to prevent any issues.

FAQs

• Q: How often should I clean the filter?
  • A: It is recommended to clean the filter every two weeks to ensure optimal performance of the dehumidifier.
• Q: Can I use this dehumidifier in a basement?
  • A: Yes, you can use the FRIGIDAIRE FDH30J1 in a basement to help control humidity levels and prevent mold growth.

INTRODUCTION

READ AND SAVE THESE INSTRUCTIONS

• Record Model No. and Serial No. of this dehumidifier in space provided below. These numbers are printed on the nameplate located behind the bucket.
• Model No.
• Serial No.

IMPORTANT: Keep a copy of your bill of sale. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.

Register Your Product

• The self-addressed PRODUCT REGISTRATION CARD should be filled in completely, signed, and returned to the Frigidaire Company.
• Operate dehumidifier only as instructed in this Owner’s Guide. These instructions are not meant to cover every possible condition and situation that may occur.
• Common sense and caution must be used when installing, operating, and maintaining any appliance.

DEHUMIDIFIER WARRANTY

Your product is protected by this werranty

Your appliance is warranted by Frigidaire Company, a division of White Consolidated Industries, Inc. We authorize no person to change or add to any of our obligations under this warranty. Our obligations for service and parts under this warranty must be performed by Frigidaire Company Consumer Services or an authorized Frigidaire Company servicer.

NORMAL RESPONSIBILITIES OF THE CONSUMER

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below.

1. Proper use of the appliance in accordance with instructions provided with the product.
2. Proper installation by an authorized servicer in accordance with instructions provided with the appliance and in accordance with all local plumbing, electrical and/or gas codes.
3. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house wiring.
4. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves, etc., which are not a part of the appliance when it was shipped from the factory.
5. Damages to finish after installation.
6. Replacement of light bulbs and/or fluorescent tubes (on models with these features).

EXCLUSIONS

This warranty does not cover the following:

1. CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
   • Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not apply to you.
2. Service calls which do not involve malfunction or defects in workmanship or material, or for appliances not in ordinary household use. The consumer shall pay for such service calls.
3. Damages caused by services performed by persons other than authorized Frigidaire Company servicers; use of parts other than Frigidaire Company Genuine Renewal Parts; obtained from persons other than such servicers; or external causes such as abuse, misuse, madequate power supply or acts of God.
4. Products with original serial numbers that have been removed or altered and cannot be readily determined.

IF YOU NEED SERVICE

Keep your bill of sale, delivery sip, or some other appropriate payment record. The date on the bill establishes the warranty period should service be required. If service is performed, it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:

1. Contact Frigidaire Company Consumer Services or an authorized Frigidaire servicer.
2. If there is a question as to where to obtain service, contact the Frigidaire Consumer Relations Department at:

Important Safety Instructions

WARNING Avoid fire hazard or electric shock. Do not use an extension cord or an adaptor plug. Do not remove grounding prong from power cord.

• Read all instructions before using this dehumidifier. To reduce the risk of fire, electric shock, or injury to persons when using your dehumidifier, follow basic precautions, including the following:

WARNING For Your Safety

• Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Read product labels for flammability and other warnings.

WARNING Child Safety Precautions

• Destroy the carton, plastic bags, and any packing materials immediately after the dehumidifier is unpacked. Children should never use these items for play.
• Do not leave children unattended in an area where the appliance is operating.
• Do not allow them to sit or stand on the appliance.

WARNING Electrical Information

• For your safety and protection, this dehumidifier is equipped with a three-prong grounding plug on the power cord. Do not, under any circumstances, cut or remove the round ground prong from the plug.
• Your dehumidifier must be plugged directly into a properly grounded and polarized three-prong receptacle.
• If the wall receptacle you intend to use will not accept a three-prong plug, or if you are not sure the outlet is adequately grounded or protected by a time delay fuse or circuit breaker, have a qualified electrician install the proper outlet according to the National Electrical Code and applicable local codes and ordinances.
• Do not use an extension cord or an adapter plug.
• Never unplug the dehumidifier by pulling on the power cord. Always grip the plug firmly and pull straight out from the receptacle.
• Do not pinch, bend, or knot the power cord.

LOCATION

Selecting a Location IMPORTANT:

1. Dehumidifier must be operated in an enclosed area to be most effective. Close all doors, windows, and other outside openings to the room. The effectiveness of the dehumidifier depends on the rate at which new moisture-laden air enters room.
2. Place dehumidifier in a location that does not restrict airflow through the front of the unit or out of the louvers on the left side of cabinet.
3. A dehumidifier operating in a basement will have little or no effect in drying an adjacent enclosed storage area, such as a closet, unless there is adequate circulation of air in and out of the area. It may be necessary to install a second dehumidifier in the enclosed area for satisfactory drying.

HOW IT WORK

When the unit is started, the fan begins to pull moisture-laden air across the dehumidifying coils. The coils condense or draw moisture from the air, and air flows through the side louvers into the room as dry, warm air. Moisture removed from air is collected in a bucket on the front of the dehumidifier. © 1996 White Consolidated Industries, Inc. All rights reserved.

Operating Steps

The bucket has a hose/drain connection. The dehumidifier should be kept in operation as long as excess moisture is present in the room air.

To begin operating the dehumidifier, follow these steps:

1. Plug the power cord into a properly grounded 110/120 volt AC outlet.
   • Note: Before operating this unit, see the “Removing Collected Water” section for proper placement of the bucket. Model will not operate if the bucket is not properly positioned in the unit.
2. When first using the dehumidifier, turn the Humidistat Control clockwise to the MAX. DRY position. The unit will run continuously at this setting.
3. Press the Fan Speed Button to HI. The HI setting is recommended for faster moisture removal.
4. Allow the dehumidifier to operate at the above settings for three to four days. After this time, adjust the controls as needed. See below.

Dehumidifier Features

Humidistat Control

• The Humidistat Control automatically starts dehumidifier when humidity is excessive. When humidity has been reduced to the comfort level set on the control, the unit turns off.
• When first using dehumidifier, turn Humidistat Control clockwise to MAX.DRY. Unit will run continuously at this setting. Operate dehumidifier at the MAX.DRY setting for three to four days.
• During this time, observe the dampness conditions in the area being dried.
• When the sweating has stopped and the dampness odors are gone, adjust Humidistat Control to the position between Off and MAX.DRY that provides a “dryness” condition suitable to your needs/comfort.
• Fan Speeds
• The Fan Speed adjusts fan speed. When humidity has been reduced to the desired level and quiet operation is preferred, press Fan Speed to LO.
• Moisture Removal
• At first, the dehumidifier will remove large amounts of moisture. It will continue to do so until the relative humidity is reduced to a point where moisture damage will not occur. Then, the amount of moisture removed from the air will be a lot less.
• This indicates the dehumidifier is operating effectively and is maintaining the relative humidity at the desired level.
• Judge the performance of the dehumidifier by the elimination of dampness and dampness odors, not by the amount of water being deposited in the bucket.
• When bucket has filled with water, unit will turn off. All models feature an
• Automatic Shut-Off light that will glow until bucket is emptied and returned to the proper position.

Operating Conditions

• All models will operate if the room teperature is greater than 65°F (18°C).
• Models with a moisture removal capacity greater than 40 pints per 24 hours will operate satisfactorily at a temperature no lower than 50°F (10°C).
• If conditions less than those stated or the humidity is low the dehumidifier should be turned off. See “Frost Control”
• A dehumidifier will not eliminate frost on windows during winter. The dehumidifying coil normally operates above freezing temperatures and cannot prevent moisture from condensing on the inside of a window pane that is below freezing.
• TIP: It may be helpful to use a dehumidifier in the kitchen or laundry area where the humidity is high. Reducing humidity in these areas may reduce frost on windows in other parts of the home.

Frost Control

• The Frost Control feature prevents frost or ice from remaining on the dehumidifying coil for an extended period of time. When frost formation occurs, this control turns off the compressor. The fan continues to run, causing any frost or ice to melt.
• Dehumidifier will then resume normal operation.
• Frost Control is also designed to prevent excessive on-off cycling. Under certain conditions this may allow frost to remain on coil for some time before the compressor turns off and the frost is cleared.

Removing Collected Water

Bucket and Float Installation

• All models are supplied with a bucket, which is conveniently tucked into the front of the unit to accumulate water removed from the air, or use the built-in hose connection to carry water directly to a drain.
• When using the bucket the Automatic Shut-Off switch is activated by a float. The
• Automatic Shut-Off switch stops the unit before the bucket overflows, and turns the unit on again after the bucket is emptied and replaced.
• The bucket and float must be installed correctly for proper operation (Figure 1).

Bucket Removal

1. Grasp bucket from both sides at the bottom, gently lift up and slide halfway out until handle is exposed. See Figure 2.
2. Grab handle and slide bucket away from unit. See Figure 3.
3. After emptying the collected water, slide bucket back into place.
4. Be sure bucket is in place.

Direct Draining

Direct Draining

• If you want the water to flow directly to a drain, you must first remove the hose cap (Figure 2). To remove hose cap, use a standard screwdriver and turn counter- clockwise. Connect any standard garden hose to the bucket connection, or place the dehumidifier over the drain. A standard garden hose has a 3/4″  (19 mm) diameter connection with 11’¼2 inch threads per inch.
• Not e: When using either of the above direct draining methods, you must first drill a 3/8″ (10 mm) hole in the center of the bucket connection. (For ease of drilling use locating mark to center drill bit for hole (Figure 3).) This will allow water to flow treely through the connection. lo reseal the hose connection to the bucket, use any standard hose end cap. The hose cap cannot be used to reseal the hole.

Care and Cleaning

Proper Care
Before cleaning, be sure to turn off and unplug unit.

1. Dust outer cabinet with an oil-free cloth, or wash with warm water.
2. Use a vacuum cleaner and brush attachment to clean grill.
   • Note: Fan motor has been permanently lubricated at the factory. Air passing through dehumidifier may carry quantities of dust, lint and fungus spores. Much of this matter will be deposited on the coil and then flushed away by natural drainage.

Avoid Service Checklist

Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not the result of defective workman- ship or materials in this appliance.

When the actual seal is affixed to a dehumidifier and the water removal capacity rating for that dehumidifier appears in the AHAM Certification Directory, it signifies that the rating is certified by Frigidaire Company and verified by the Association of Home Appliance Manufacturers as complying with American National Standard B149.1. CERTIFIED RATING WATER REMOVAL HAM association of home appliance manufacturers  Manufacturer Cartified to ASSOCIATION OF HOME APPLIANCE MANUFACTURERS ANSIAHAM DH-1-1992 R

CONTACT INFORMATION

• Frigidaire Company
• P.O. Box 212378
• Augusta, GA 30917
• 800-444-4944

References

• Repair Your Grill: Shop Replacement Parts for 24,880 Models
• Frigidaire Dehumidifier Parts - Select From 306 Models

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>