Hisense HWD046N6SS Under Counter Wine Refrigeration Instruction Manual

Hisense HWD046N6SS Under Counter Wine Refrigeration

Product Introduction

Before operating this unit, please read this manual thoroughly, and retain for future reference

WINE COOLER BOTTLE CAPACITY

This chart is provided as a general guide to bottle size. Everyone’s collection is different and there are many different bottle size and shapes on the market. The bottle capacity listed for wine coolers is for standard Bordeaux 750ml bottles (including champagne and sparkling wine bottles) will decrease the number of bottles you are able to store in your wine cooler.

Brief Introduction

Thank you for choosing Hisense. We hope you find your new appliance a pleasure to use. Before you use the appliance, we recommend that you read through these instructions carefully, which provide details about its usage and functions.
Please ensure that all people using this appliance are familiar with its operations and safety features.

It is important that you install the appliance correctly and pay attention to the safety instructions carefully.
We recommend that you keep this user’s manual with the appliance for future reference and for any future users.

This appliance is intended to be used in household and similar applications such as:

• Kitchen- areas in shops, offices and other working environments;
• Suites in hotels, motels and other residential types of environment;
• Bed and breakfast environments.
• Catering and similar non-retail applications. If you feel that the appliance is not operating correctly, please check the Troubleshooting page for assistance. If still in doubt contact the Hisense customer service help line for assistance or to arrange a call out by an authorized service technician.

Important Safety Instructions

Warning: General safety and daily use

• The appliance is intended to be used exclusively for the storage of wine as explained in this instruction booklet.

WARNING

• The WARNING alert means a potentially hazardous situation. Serious injury or death may occur if not avoided.

DANGER

• The DANGER alert means an imminently hazardous situation. Serious injury or death may occur if not avoided.

CAUTION

• The CAUTION alert means a potentially hazardous situation. Moderate or minor injury may occur if not avoided.

WARNING

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• It is dangerous to alter the specifications or modify this product in any way.
• Before any cleaning or maintenance work is carried out, be sure to switch off and unplug the appliance.
• This appliance is heavy. Care should be taken when moving it.
• Take utmost care when handling your appliance so as not to cause any damage to the cooling unit with consequent possible fluid leakages.
• The appliance must not be located close to radiators or gas cookers.
• Avoid prolonged exposure of the appliance to direct sunlight.
• There must be adequate ventilation around the appliance and any damage to the refrigerant circuit must be avoided.
• Do not use other electrical appliances inside of the appliance.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
• Keep burning candles, lamps and other items with flames away from the appliance so that they do not set the appliance on fire.
• Do not use extension cords or ungrounded (two prong) adapters;
• If the cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.
• Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.

WARNINGS

• Keep all ventilation openings clear of obstruction in the appliance enclosure and in the cabinet enclosure.
• Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the appliance, unless they are of the type recommended bu the manufacturer.
• Risk of child entrapment. Before you throw away your old refrigerator or freezer:
  • Take off the doors.
  • Leave the shelves in place so that children may not easily climb inside.

Service/ Repair

• Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.
• This product should be serviced by an authorized Service Center, and only genuine spare parts should be used.
• Under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or more serious malfunctioning. Refer to your local Service Center, and always insist on genuine Hisense spare parts.
• This appliance contains hydrocarbons in its cooling unit; maintenance and recharging must therefore only be carried out by authorized technicians.

Service Note

• This appliance employs Hydrocarbon Refrigerant type R600a. It is hazardous for anyone other than an Authorized Service Person to service this appliance.

Use

• The wine cabinet is designed to be used specifically for the storage of potable wine only.
• Best performance is obtained with ambient temperature as follows:
  • Ambient Temperature Range: +12.8℃ (55℉) to + 38℃ (100℉)

The class of your appliance is shown on its rating plate.

Note: If the ambient temperature is higher or lower than the above listed, the energy consumption will be affected accordingly.

• Do not store flammable gas and liquid in the appliance, because they may explode.
• Do not place wine directly against the rear wall of compartment.
• The appliance manufacturer ’ s storage recommendations should be strictly adhered to.
• Refer to Using your appliance.
• The inner lining of the appliance has channels through which the refrigerant passes. Should the channels be punctured the unit could become damaged beyond repair.
• DO NOT USE SHARP INSTRUMENTS to scrape off frost or ice. Frost may be removed by using a scraper period.
• Under no circumstances should solid ice be forced off the liner. Solid ice should be allowed to thaw by defrosting the appliance.

Installation

Important: For electrical connection carefully follow the instructions given in specific paragraphs.

• Unpack the appliance and check if there is any damage to it. Do not connect the appliance if it is damaged. Report possible damage immediately to the place of purchase. In this case retain all packing materials.
• During normal operation, the compressor and/or condenser at the back of the appliance heat up considerably. For safety reasons, minimum ventilation must be as shown in the instructions.
• Transmitting frequency band(s) and max allowed transmitting power in the operating frequency band(s):2400-2483.5MHz, less than or equal to 20dbm.
• This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Attention: Keep ventilation openings clear of obstruction.

• Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
  • Important: if the power cord is damaged, it must be replaced by a special cord or assembly available from the manufacture or its service agent.
• Do not use extension cords or ungrounded (two prong) adapters.
• If the appliance is transported horizontally, it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is advisable to wait at least two hours before connecting the appliance to allow the oil to flow back in the compressor.
• There are working parts in this product which heat up. Always ensure that there is adequate ventilation as a failure to do this will result in component failure and possible loss. See installation instructions.
• Parts which heat up should not be exposed. Wherever possible the back of the product should be near the wall.

Electrical Connection

1. The appliance requires a single phase 115V/60Hz power supply. It has a power cord that has a 3-prong grounding plug that minimizes the possibility of electrical shock. This appliance must be grounded. Do not remove the grounding prong or modify the power plug.
2. Do not modify the power plug. The power plug must be accessible when the appliance is installed.
3. The appliance should not be turned off with a switch or other device.
4. Make sure that the plug is not squashed or damaged. Otherwise, it may cause short circuit, electric shock or overheat and even cause a fire.
5. Do not insert the power plug if the socket is loose, there is a risk of electric shock or fire.
6. Switch off the appliance and disconnect it from the main power before you clean or move it.
7. Never unplug the appliance by pulling on the electrical cord. Always grip the plug firmly and pull straight out from the socket to prevent damaging the power cord.
8. Do not operate the appliance without the cover over the interior lighting.
9. Any electrical component must be replaced or repaired by a qualified electrician or Hisense authorized service technician. Only genuine replacement parts should be used.
10. To avoid eye injury, do not look direct into the LED light located in the refrigerator compartment. If it is not functioning correctly, consult a qualified, registered electrician or replace it in accordance with the “cleaning and care” chapter.

Environment Protection

This appliance does not contain gasses which could damage the ozone layer, in either its refrigerant circuit or insulation materials. The appliance should not be discarded together with your local city refuse and rubbish. The insulation foam contains flammable gasses. The appliance should be disposed of according to the applicable regulations of your local government. Avoid damaging the cooling unit, especially at the rear near the heat exchanger.
The materials used on this appliance marked by the symbol are recyclable.

Use

Cleaning the interior

• Before using the appliance for the first time, wash the interior and all internal accessories with luke warm water and some neutral soap so as to remove the typical smell of a brand-new product, and then dry naturally and thoroughly.

WARNING

• Do not use detergents or abrasive powders, as these will damage the finish.

Refrigerant

• The refrigerant isobutene (R600a) is contained within the refrigerant circuit of the appliance.
• During transportation and installation of the appliance, ensure that none of the components of the refrigerant circuit becomes damaged.

Do not use detergents or abrasive powders, as these will damage the finish.

WARNING

• Risk of fire/ flammable materials

The symbol is a warning and indicates the refrigerant and insulation blowing gas are flammable.

Installing your new appliance

Before using the appliance for the first time, you should be informed of the following tips.

VENTILATION OF APPLIANCE

• In order to improve efficiency of the cooling sysetem and save energy , it is necessary to maintain good ventilation around the appliance for the dissipation of heat.

For this reason, sufficient clear space should be available around the product.
Suggest: It is advisable for there to be at least l/2 inch of space from the back to the wall, at least l/2 inch from its top, and at least l/4 inch from its side to the wall. As shown in the following diagrams.

Note:

• Avoid locating the appliance in damp areas .Too much moisture in the air will cause frost to form quickly on the evaporator.

• Keep the appliance out of direct sunlight, rain or frost.Position the product away from heat sources such as stoves, fires or heaters.

• Position your appliance in a dry place to avoid high moisture.

• This product is used as an built-in appliance, the product needs to be installed in the cabinet or a similar counter, Use the mechanism to fix the product to prevent falling.

Leveling Of Appliance

The appliance should be level in order to eliminate vibration. We recommend that you level the appliance by the following steps.

1. Put the refrigerator into the right place.
2. Turn the adjustable feet (with your fingers or a suitable screw driver) until they touch the floor.
3. Tilt back the top backwards for about 10-15mm or 1°by turn the adjustable feet. This will allow the doors f-close providing a consistent closed seal.

Electrical Connection

Caution

• Any electrical work required to install this appliance should be carried out by a qualified person or authorized service technician.

WARNING

• This appliance must be grounded. The manufacturer dec lines any liability should these safety measures not be observed.

Description of the appliance

Description of the appliance
Equipped with metal shelves

1. Control panel
2. LED light
3. Shelves
4. Cabinet leg
5. Door
6. Handle

Note:

• The appliance can keep 46 bottles of wine at the same time, please place the wine bottles as shown above.
• Bottle capacities, mentioned in this manual are based on standard BORDEAUX 750ml bottles and standard shelving.

Display Controls

Unlock

• All the keys are locked if the icon “ ” is illuminated, touch the “ ” key for approximately 3 seconds to unlock them. And it will be locked itself after 20 seconds if no touching any key.

Display

The control panel, shown above, is at the middle of the wine storage appliance.

• Each time the power turns on, the display panel will light everything for seconds, and then enter the normal display status.
• The display will activate the screen saver when the door is closed for 60 seconds with the display on.
• Open door action will exit the screen saver.
• Any button touch or open door action will exit the screen saver.
• Touch the key while the appliance is under screen saver state would activate the screen only. It will not change the settings.
• Each valid button press emits a short sound.
• The corresponding temperature setting is reflected in the display, and the setting takes effect and is stored after 10 seconds of operation without touch the key.

Standby Mode

When you do not plan to use this appliance for a period of time, you can save energy by entering the standby state.

• To enter standby mode, Touch and hold the standby key for more than 3 seconds in the unlock sate. The buzzer will beep and the display board will show “–“
• To exit standby mode, Touch and hold the standby key for more than 3 seconds in the unlock sate. The buzzer rings will beep.

NOTE

• In standby mode, cooling will stop. If you do not to use the appliance for a long time, take out the wine, and unplug the unit.

Light key

• When the door opened, the lighting automatically lights up. The door closed, and the lighting is delayed for 30 seconds to turn off.
• After the door is opened, the lighting can be turned on or off by touch the light key.
• The brightness of the light can be adjusted. Touch the light key for approximately 3 seconds. to enter the light brightness adjustment mode, with 2 beeps. Touch the light key to adjust the brightness of the lighting according to the cycle of high, medium, and low. Touch the light key for approximately 3 seconds, or after 10 seconds of keyless operation, or touch any key except for the light key, will exit the light brightness adjustment mode.

NOTE

• When the door remains open, the light will automatically turn off after a maximum of 10 minutes of illumination.

Temperature Measure Change (°F/°C)

• You can change the temperature display setting from Fahrenheit to Celsius degrees by touch the “ “key for 3 seconds, and vice versa.

Temperature regulation

• You can set the temperature you desire by touch the key . The temperature will increase 1°C or 1°F each time you touch the UP key and will decrease 1°C or 1°F each time you touch the DOWN key.

NOTE:

• The appliance doesn’t work properly if the set temperature is higher than the ambient temperature.
• The temperature range is from 5°C(41°F) to 18°C ( 64.4°F).
• The temperature preset at the factory is 12°C(54°F).
• When you set a temperature, you set an average temperature for the whole cabinet. There may be a 2°C ( 36°F)to 3°C ( 38°F)variance between the top and bottom shelves of the appliance.

Over Temperature Alarm

• In order to avoid a the temperature problem that could affect the quality of the wine, the appliance has an overtemperature alarm function.
• When an over temperature alarm occurs, cancel the alarm by pressing the Cancel Alarm Key and take out the wine, and contact customer service.

NOTE:

• In the over temperature alarm state, press the Cancel Alarm Key to exit the over temperature alarm, the alarm tone stops, once the appliance cools to the required temperature.

WARNING

If the LED light is broken, please DO NOT CHANGE IT YOURSELF! Changing the light yourself may cause injury or serious malfunctioning. It must be replaced by a qualified service technician in order to avoid a hazard. Contact your local Service Center for help. Before changing the LED light, switch off the appliance and unplug it, or pull the fuse or the circuit breaker.

Door Alarm

• The door alarm will sound once the fridge door is open over 1 minutes. In case of door alarm, the buzzer will sound 3 times per minute and will stop automatically 9 minutes later. Closing the door will also clear the door alarm.
• To save energy, don’t keep the door open for a long time when using refrigerator.

Sabbath mode

In the unlocked state ,touch and hold the” ” key that is on the right side of control panel and the” ” key for more than 3 seconds to enter the Sabbath mode,the control panel is off,the key does not respond, the buzzer does not respond, until it automatically quit for 80 hours or long press the key combination again.

Demo mode

Demo mode is for store display, and it prevents the wine cooler from generating cool air. In this of Cooling off Mode, the wine cooler may seem like it is working but it will not make cool air. The display panel will show “OF”. In demo mode, press the “ ” key and” ” key at the same time for about 3 seconds, the wine cooler will exit demo mode with 3 short beeps.

Connecting your Wine Cooler to Wi-Fi

ConnectLife app

• ConnectLife is a smart home app that allows you to communicate with your smart appliances using a smartphone or tablet.

Installation

1. Open the Apple App Store (iOS) or the Google Play Store (Android) on your smartphone.
2. Search for the “ConnectLife ” app.You will see an app with the following icon：
3. Download and install the ConnectLife app provided by ConnectLife, LLC.
   • Alternatively, you can scan the following QR code with your smartphone or tablet to find the ConnectLife app:

Note

• The distance between your appliance and the Wi-Fi router can impact the performance. If they are too far apart, pairing your appliance might fail or take longer.
• The appliance supports 2.4 GHz Wi-Fi networks only. The Wi-Fi network SSID must be visible.
• The surrounding wireless environment (other connected devices) can affect the performance of your network.
• Your appliance Wi-Fi connection may experience interruptions due to external factors such as your home network environment or Internet service provider.

Connecting your Wine Cooler

After installing the ConnectLife app, sign in or create an account and follow these steps:

1. Ensure the appliance is powered on and the control panel is active. You will know it is ready when the lights that indicate temperature are on.
2. Put the wine cooler in pairing mode by holding the Wi-Fi button for 3 seconds. You will hear a beep and see the Wi-Fi light following icon:
3. Ensure Bluetooth is enabled on your phone and open the ConnectLife app. Look for the pop-up indicating that a new appliance has been found. Tap the button on the pop-up and follow the instructions to proceed.
4. If a pop-up doesn’t appear, tap the button called “Add appliance” or “+” in the app.
5. Locate “Wine Climate Cabinet” in the device list and select it.
6. Follow the instruction in the app to connect your Wine Cooler. Once the setup is complete, your Wine Cooler will appear on your home screen.

Note

• The appliance will remain in pairing mode for a maximum of 5 minutes.
• To factory reset your network settings, press & hold the Wi-Fi button for 6 seconds. You will hear two beeps once the appliance is reset.
• After resetting, the appliance will automatically go into pairing mode.
• A solid Wi-Fi light indicates the appliance is successfully connected to the home network.

Using your appliance

This section tells you how to use most of the useful features. We recommend that you read through them carefully before using the appliance.

Installation The Handle

The parts you will need:

Before you use the appliance, you have to install the handle as follows:

1. Find the handle and 1/8″allen wrench in the accessory pack.
2. Remove the handle screws using the 1/8″fallen wrench on both sides of the handle and store the handle screws.
3. Align the handle holes with the handle supports on the door.
4. Hold the handle and tighten the handle screws with the 1/8″allen wrench.
5. Install another screw in the same way.

Placement Of Bottles

The appliance is equipped with 5 shelves with 8 slots each. The bottles should be placed on the shelves as shown below.

• You can also place bottles in the six slots which are located at the bottom of the refrigerator.

WARNING

• To prevent the bottles from rolling down and being broken, there should not be more than 6 bottles placed at the bottom of the refrigerate room as showed above.
• The maximum loading of each type of shelf is 33lb.

Tips For Keeping The Wine

• Keep the wine in the dark .The door is in anti-UV darkened doubl e glassto protect the wine from the light in case the refrigerator is located in well – lit place.
• Lay the bottles down in such a way that the corks do not dry.
• Avoid switching the appliance light on too often or for too long. Wine keeps better in dark.
• To avoid agitating the wine, handle the bo ttles with care.
• Follow the recommendations and ad vice at the time of purchase or given in the technical documentation regarding the quality, duration and optimum storage temperature of the wine.
• The proper storage of wine depends on its age , type of grapes, alcoh olic content and level of fructose and tannin contained in it. At the time of purchase, check if the wine is already aged or if it will improve over time.

Reversing The Door

• The side at which the door opens can be changed, from the righ t side (as supplied) to the left side, if required.

WARNING

• When reversing the door, the applian ce must not be connected to power.
• Ensure that the plug is removed from the power socket.

The tools you will need (Not provided):

Note: If required you may lay the refrigerator on its back in order to gain access to the base, you should rest it on soft foam packaging or similar material to avoid damaging the backboard of the refrigerator. To reverse the door, the following steps are generally recommended.

1. Stand the wine cooler upright, close the door, use a knife or thin-blade screwdrive to pry off the screw hole cover which is at the top left corner of the cooler, and unscrew the special flange screws which are used for fixing the right upper hinge part (please support the upper door with your hand when doing it).
2. Move the door from the hinge by carefully lifting the door straight up.
   • Note: When removing the door, watch for washer(s) between the hinge and the bottom of the upper door that may stick to the door. Do not lose these washers.
3. Unscrew the grille cover fixing screws then lifting up and pulling backwards, take the grille cover off the cabinet.
   • Note: Take care of the screws. Record the screw’s place of use and quantity.
4. Transform the bottom hinge from right to left as following:
5. Unscrew the bottom right hinge screws

  *  **Note:** Keep the hinge for the future use.
2. Transform
  * The bottom right hinge into bottom left hinge,relax the axis of the hinge and install it on the left hole,Screw up the axis.
3. Install the bottom left hing on the left side of the cabinet.use the screws fixing.

5. Flip the grille cover from left to right as following:
6. Pull it out from the left side slot.
7. Turn it 180 degree.
8. Put it into the right side slot.
9. Reattach the grille cover to the wine cabinet as shown below.
10. Change the axle hole parts of as follows:
11. Pull out top right axle hole part by knife or thin-blade screwdriver.
12. Turn the door 180 degrees, face to the bottom of the door and remove the reinforcement part and magnet supporter with the screwdriver.
13. Put the top left axle hole part into the door hole.
14. Turn the door 180 degrees, Reattach the reinforcement part and magnet supporter using the same screws.

  *  **Note:** Handle the door carefully. It is fragile.

8. Turn the door 180 degrees, put the door on the cabinet using the hinge and screws, on the top left side. Use screw hole cover (right) to hide the holes on the top right side of the wine cabinet.

Wine Serving Temperature Chart

All wines mature at the same temperature, which is a constant temperature set between 12 °C(53.6°F) to 14°C(57.2 °F). The below chart is an indicative temperature chart to ind icate the best temperature for drinking purposes.

Champagne Vintage Dry White Chardonnay

Dry White Gewurztraminer Riesling, Pinot grigio

Sweet White Sauternes, Barsac Ice Wine,Late Harvest

| 10°C (50 °F)
Beaujolais| 13°C (55.4 °F)
Sweet White Vintage:Sauternes… White Vintage Chardonnay| 14°C (57.2 °F)
Red Pinot Noir

Red Grenache.Syrah

|

16°C (60.8 °F)

Red vintage Pinot Noir| 18°C (64.4 °F)
Cabernet & Merlot: French, Australian, New Zealand, Chilean, ltalian, Spanish, Californian, Argentinean…|

20°C (68 °F)

WARNING

• When disposing of your appliance, use an approved disposal site.
• Remove the plug and ensure that any locks or catches are removed, to prevent young children being trapped inside.

Cleaning And Care

For hygienic reasons the appliance (including exterior and interior accessories) should be cleaned regularly.

WARNING

• Before cleaning, the appliance must be powered off and unplugged. Danger of electrical shock!

Exterior Cleaning

To maintain good appearance of your appliance, you should clean it regularly.

• Spray water onto the cleaning cloth instead of spraying directly on the surface of the appliance. This helps ensure an even distribution of moisture to the surface.
• Clean the door with a mild detergent and th en wipe it dry with a soft cloth.

CAUTION

• Don’ t use sharp objects as th ey are likely to scratch the surface.
• Don’ t use Thinner, Cardetergent, Clorox, oils, abrasive cleansers or organic solvents such as Benzene for c leaning. They may amage the surface of the appliance and d may cause fire.

Cleaning The Wine Refrigerator

To clean the wine refrigera tor, you should follow these steps:

• Unplug the appliance and remove the bottles.
• Wash the inside with a warm water and baking soda solution.The solution should be about 2 tablespoons of baking soda to 4 cups of water.
• Wash the shelves with a mild detergent solution.
• It may also be necessary to periodically wipe bottom part of the storage are ,as the wine refrigerator is designed to retain humidity, and condensation may collect there.

Troubleshooting

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.

WARNING

Don’ t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service technician or the store where you purchased the product.

the “Display controls” section.
Door was open for an extended period.| Open the door only as long as necessary.
The appliance is near a heat source.| Please refer to the “Installing your new appliance” section.
Heavy build up of frost, possibly also on the door seal.| Door seal is not air tight (possibly after changing over the hinges).| Carefully warm the leaking sections of the door seal with a hair dryer (not hotter than approx. 50 ° C) . At the same time shape the warmed door seal by hand such that it sits correctly.
Unusual noises.| Appliance is not level.| Readjust the feet.
The appliance is touching the wall or other objects.| Move the appliance slightly.
A component, e.g. a pipe, on rear of the appliance is touching another part of the appliance or the wall| If necessary, bend the

component out of the way arefully.

The compressor does not start immediately after changing the temperature etting.|

This is normal, no error has occurred.

| The compressor starts after a period of time.
The setting temperature is higher than the ambient temperature.| Set the temperature lower than the ambient temperature as you

want.

Water on the floor.

| Water drain hole is blocked.| Please refer to the “Cleaning and care” section.
Unable to connect appliance to WiFi network| The password for home Wi-Fi network was entered incorrectly.| Make sure the password is correct and connect again.
The home Wi-Fi router frequency is not 2.4GHz.| The appliance only supports 2.4GHz radio frequency. Set up a dedicated 2.4GHz Wi-Fi SSID and connect the appliance to it.
The router and appliance kept far apart causing the poor network.| Consider either moving the router closer to the appliance or purchasing Wi-Fi range extender and installing it.

Disposal of the appliance

If you experience a problem with your appliance or are concerned that the appliance is not functioning correctly, you can carry out some easy checks before calling for service, please see below.

WARNING

Don’t try to repair the appliance yourself. If the problem persists after you have made the checks mentioned below, contact a qualified electrician, authorized service technician or the store where you purchased the product.

Packaging Materials

• Packaging materials with the recycle symbol are recyclable. Dispose of the packaging into a suitable waste collection container to recycle it.

Before Disposal Of The Appliance

1. Pull out the power cord from the power socket.
2. Cut off the power cord and discard.

WARNING

• Refrigerators contain refrigerant and gases in the insulation. Refrigerant and gases must be disposed of professionally as they may cause eye injuries or ignition.
• Ensure that tubing of the refrigerant circuit is not damaged prior to proper disposal.

Correct Disposal of this product

This symbol on the productor in its packing indicates that this product may not betreated as household waste. Instead, it should be taken to the appropriate waste collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by the inappropriate waste handling of this product. For more detailed information about the recycling of this product, please contact your local council your household waste disposal service, or the shop where you purchased the product.

FAQ

• Q: Can I store bottles larger than standard Bordeaux 750ml in this wine cooler?
  • A: While designed for standard 750ml bottles, you may need to adjust shelf placement to accommodate larger bottles. Refer to the bottle capacity guide for details.
• Q: How do I connect my wine cooler to Wi-Fi?
  • A: Follow the instructions in the user manual to connect your wine cooler to Wi-Fi for remote monitoring and control using the designated app.
• Q: What should I do if my wine cooler displays an error code?
  • A: Consult the troubleshooting section of the manual to identify the error code and follow the recommended steps. If the issue persists, contact customer service for assistance.

More Information

©2019 Hisense Company Ltd. All Rights Reserved.

All material in this User’s Operation Manual is the property of Hisense Company Ltd. and its subsidiaries, and its protected under US, CANADA, MEXICO and international copyright and/or other intellectual property laws. Reproduction or transmission of the materials, in whole or in part, in any manner, electronic, print, or otherwise, without the prior written consent of the Hisense Company Ltd. is a violation of Hisense Company Ltd. rights under the aforementioned laws.
No part of this publication may be stored, reproduced, transmitted or distributed, in whole or in part, in any manner, electronic or otherwise, whether or not for a charge or other or no consideration, without the prior written permission of Hisense Company Ltd.

Requests for permission to store, reproduce, transmit or distribute materials may be made to one or the following addresses:

USA: Hisense USA Corporation

• 105 Satellite BIvd NW, Suwanee, GA 30024

CANADA: Hisense Canada Co., Ltd

• Unit 1, 2550 Meadowvale Blvd, Mississauga, ON L5N8C2

MEXICO: Hisense Mexico S. de R.L. de C.V.

• Bivd. Miguel de Cervantes Saavedra No 301
• Torre Norte Piso 2, Col. Ampliación Granda Miguel Hidalgo, Ciudad de México, C.P. 11520

Hisense, and any and all other Hisense product names, logo’s, slogans or marks are registered trademarks of Hisense Company Ltd. and its subsidiaries. All other trademarks are the property of their respective holders.
Please be aware that the image shown here is indicative only. If there is any inconsistency between the image and the actual product, the actual product shall govern.

For questions about features, operation/performance, parts or service,call: 1-855-344-7367

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>