APA 32306 Windscreen Protector Instruction Manual
- August 10, 2024
- APA
Table of Contents
- APA 32306 Windscreen Protector
- Product Information
- Product Usage Instructions
- PROPER USE OF THE PRODUCT
- SCOPE OF DELIVERY
- SPECIFICATIONS
- SAFETY PRECAUTIONS
- OPERATING INSTRUCTIONS
- MAINTENANCE AND CARE
- ENVIRONMENTAL PROTECTION
- CONTACT INFORMATION
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
APA 32306 Windscreen Protector
Product Information
Specifications:
- Dimensions:
- Art. no. 32306: approx. 204 x 80cm
- Art. no. 32307: approx. 204 x 95 cm
- Art. no. 32316: approx. 200 x 70cm
- Art. no. 81454: approx. 212 x 70cm
- Material thickness: approx. 2.5mm
Product Usage Instructions
-
Proper Use of the Product
Read the operating instructions carefully before initial use and follow all safety notes to prevent personal injuries or damage to the device or property. -
Scope of Delivery:
- 1 x windscreen protector
- 2 x suction cups (only for art. no. 32306 and 32307)
- 1 x instructions for use
-
Safety Precautions:
Follow the safety precautions stated in the instructions or recommended by the manufacturer. -
Operating Instructions:
-
First, insert the suction cups into the eyes on the lower edge of the windscreen protector.
-
Position the windscreen protector upright and fold it away from the windscreen.
-
For some vehicles, move the windscreen wipers to a maintenance position as per your vehicle’s manual.
-
Remove the windscreen protector before switching on the vehicle ignition to prevent damage to the wipers.
FAQ:
-
Q: Can I keep the windscreen protector on while driving?
A: No, it is recommended to remove the windscreen protector before starting the vehicle to avoid potential damage to the wipers. -
Q: Are suction cups included for all item numbers?
A: Suction cups are only included for item numbers 32306 and 32307.
WARNING
- Read the operating instructions carefully before initial use and observe all of the safety notes!
- Non-compliance can lead to personal injuries and damage to the device or your property!
- Store the original packaging, the receipt, and these instructions so that they may be consulted at a later date! When passing on the product, please include these operating instructions as well.
- Please check the contents of the package for integrity and completeness before use!
PROPER USE OF THE PRODUCT
- The protector for the front windscreen is used as protection against heat in the summer. The heating of the vehicle interior is reduced, and upholstery and plastics are protected from fading. In winter, it protects the front windscreen against ice and snow.
- The windscreen protector may also be used as an insulating mat in the event of breakdowns, when camping, in a stadium, or for injured persons in the event of an accident.
- The windscreen protector is not intended to be used by children and persons with impaired mental capacity or the necessary expertise. Children should be kept away.
- Utilization according to the intended purpose also includes the observance of all information in these operating instructions, particularly the observance of the safety instructions. Any other utilization is considered to be contrary to the intended purpose and may lead to material damages or personal injuries. EAL GmbH assumes no liability for damage resulting from improper use.
SCOPE OF DELIVERY
- 1 x windscreen protector
- 2 x suction cups (only for art. no. 32306 and 32307)
- 1 x instructions for use
SPECIFICATIONS
- Dimensions: width x height [cm]:
- art. no. 32306: approx. 204 x 80
- art. no. 32307: approx. 204 x 95
- art. no. 32316: approx. 200 x 70
- art. no. 81454: approx. 212 x 70
- Material thickness: approx. 2.5 mm
SAFETY PRECAUTIONS
- Keep children away and do not allow children to operate this device! Swallowing the suction cups may pose a danger to life.
- Do not treat packaging material carelessly. This may become a dangerous plaything for a child!
- Only use this product for its designated purpose!
- Do not manipulate or disassemble the item!
- For your safety, only use accessories and spare parts that are stated in these instructions or that are recommended by the manufacturer!
OPERATING INSTRUCTIONS
First, insert the suction cups from the foam side into the eyes on the lower edge of the windscreen protector, see Figure 1. The suction cups can now remain in the eyes for all further uses.
Position the windscreen protector upright and fold away from the windscreen. With some vehicles, the windscreen wipers must first be moved to a maintenance position, to find out more, consult the manual of your vehicle.
Suction cups are only available for article numbers 32306 and 32307
Open the driver and passenger doors of your vehicle. Place the windscreen
protector on the windscreen with the foam side down. The securing loops on the
sides should be at the top, right, and left, and the suction cups at the
bottom. Align the windscreen protector to ensure that as much of the
windscreen is covered as possible. Clean the parts of the windscreen that you
will be attaching the suction cups to. Pull the securing loops around the
A-columns (side frames of the windscreen) and close the doors, Figure 2. The
knob at the end of the securing loop means that the windscreen protector
cannot be pulled out and is thus secured to prevent theft. Smooth out the
windscreen protector and press to secure the suction cups. Fold the windscreen
wipers back to rest on the windscreen. To remove the windscreen protector,
proceed in reverse order.
First, remove the windscreen protector before switching on the ignition of your vehicle. The windscreen wipers may be returned to their resting position when the vehicle is switched on. If the windscreen protector is still in place, it may be damaged or may damage the wipers.
MAINTENANCE AND CARE
-
Maintenance
The windscreen protector is maintenance-free when used for the intended purpose. -
Care
Allow the windscreen protector to dry fully before storing it for a longer time. Keep the suction cups clean to ensure optimum adhesion.
ENVIRONMENTAL PROTECTION
NOTES REGARDING ENVIRONMENTAL PROTECTION
If the lifetime of the windscreen protector has come to an end, please
dispose of it via the recycling container. Please contact your community or
city administration regarding other disposal options.
CONTACT INFORMATION
-
EAL GmbH
Otto-Hausmann-Ring 107 42115 Wuppertal, Germany -
+49 (0)202 42 92 83 0
-
+49 (0) 202 42 92 83 – 160
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>