Ideal FURNITURE Deluxe Infinity Profile Leg Back to Back Workstations Instruction Manual

Deluxe Infinity Profile Leg Back to Back Workstations

“`html

Product Specifications:

• Model: Deluxe Infinity Profile Leg Back to Back
  Workstations

• Assembly Time Required: 40-45 minutes

• Tools Required: Screwdriver, Electric Drill, Pencil, Measuring
  tape/Ruler (Tools not included)

• Skill Level: Easy

• Recommended Persons for Assembly: Two

Product Usage Instructions:

Assembly Instructions for Model NO: Profile Leg Back to Back –

2 Person

1. Step 1: Gather all parts and tools needed for assembly.

2. Step 2: Follow the provided instructions to assemble the
   workstation leg back to back.

3. Step 3: Securely tighten all screws using the screwdriver and
   drill.

Assembly Instructions for Model NO: Profile Leg Back to Back –

4 Person

1. Step 1: Gather all components and tools required for
   assembly.

2. Step 2: Assemble the workstation following the provided steps
   for a 4-person setup.

3. Step 3: Ensure all parts are correctly aligned and securely
   fastened.

Assembly Instructions for Model NO: Profile Leg Back to Back –

6 Person

1. Step 1: Collect all necessary parts and tools as per the
   manual.

2. Step 2: Follow the assembly steps to set up the workstation for
   a 6-person configuration.

3. Step 3: Double-check all connections and tighten any loose
   screws.

Frequently Asked Questions (FAQ):

Q: Can one person assemble the workstation?

A: While it is recommended to have two persons for most
products, one person with basic DIY skills can also assemble the
workstation following the instructions carefully.

Q: Are the tools required for assembly included with the

product?

A: No, the tools such as screwdriver, electric drill, pencil,
and measuring tape/ruler are not included with the product.

“`

Assembly Instructions:
Deluxe Infinity Profile Leg Back to Back Workstations

Time Required:
40-45 minutes

Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.

Skill Required:

Easy

Hard

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.

NOTE · As this is a commercial product, some intermediate skills may be required.
· No pre-drill holes or markings are provided on our table or desk tops. · Please check you have all hardware before assembling.
· If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
· Please retain your receipt as proof of purchase to validate your warranty. · Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
· Remove all wrapping materials, including staples and packing straps before you start to assemble · Keep all hardware parts out of reach of children. CAUTION
· Heavy product. Do not attempt to lift or move without help · Do not tighten screws and bolts until completely assembled. · Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING · If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
· Failure to follow these warnings could result in serious injury.

Assembly Instructions
MODEL NO: Profile Leg Back to Back – 2 Person
Screw

STEP1

0

0

A{T187)
2PCS

2PCS

STEPS

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2

[i+ l

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2

[i+ l

Assembly Instructions
MODEL NO: Profile Leg Back to Back – 4 Person

STEP1

0

0

A(T187)
4PCS

2PCS

STEP4

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2

[i+ l

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2

[i+ l

Assembly Instructions
MODEL NO: Profile Leg Back to Back – 6 Person

STEP1

0

0

A{T187)
6PCS

1

CfP

STEPS

STEP4

2PCS

6D

M=4PCS

2PCS

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
1/2

[i+ l

IMPORTANT NOTE:

· Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

· Check to be sure that you have all parts and hardware. · Remove all wrapping materials,including staples & packing straps before you start to assemble. · Don’t tighten all screws/bolts until all completely assembled. · Keep all hardware parts out of reach of children
2/2

[i+ l

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>