Ideal FURNITURE 1800W-1128 Eternity Leg Corner Workstation Without Screen Instruction Manual
- August 9, 2024
- Ideal FURNITURE
Table of Contents
Ideal FURNITURE 1800W-1128 Eternity Leg Corner Workstation Without Screen
Specifications:
- Product Name: Eternity Leg Corner Workstation
- Assembly Time Required: 30-45 minutes
- Tools Required: Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler (*Tools not included)
- Skill Level: Easy to Hard (5-point system)
- Recommended Persons for Assembly: 2
- Note: Intermediate skills are required, no pre-drill holes or markings provided on tops
Product Usage Instructions
Eternity Leg Corner Workstation without Screen:
- Identify parts A, L, R as per the manual.
- Assemble the workstation according to the provided measurements for 1200W, 1500W, and 1800W.
- Follow the assembly instructions carefully to complete the workstation.
Eternity Leg Corner Workstation with Screen:
- Follow the same assembly steps as without the screen version.
- Additionally, install the screen according to the provided instructions.
Eternity Leg Corner Workstation – 2 Person:
- Assembly process similar to workstation without screen but designed for 2 persons.
- Follow the specific measurements for 1200W, 1500W, and 1800W.
Eternity Leg Corner – 2 Person with screen:
- Assembly instructions similar to the 2-person workstation but include screen installation steps.
Eternity Leg Corner Workstation – 4 Person:
- Designed for 4 persons to assemble, follow the instructions carefully.
- Assemble according to the measurements provided for 1200W, 1500W, and 1800W.
Eternity Leg Corner – 4 Person with screen:
- Similar assembly process to the 4-person workstation but includes screen installation steps.
FAQ
Q: Are there any pre-drill holes or markings provided on the workstation tops?
A: No, there are no pre-drill holes or markings provided. Intermediate skills
are required for assembly.
Assembly Instructions:
Eternity Leg Corner Workstation
Time Required:
30-45 minutes
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not
included.
Skill Required:
Easy Hard
- The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.
- For most products, two persons are recommended.
- Please note, as this is a commercial product, some intermediate skills are required.
No pre-drill holes or markings are provided on tops.
NOTE
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our tables or desktops.
- Please check you have all the hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble
- Keep all hardware parts out of reach of children.
CAUTION
- Heavy product. Do not attempt to lift or move without help
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury.
Assembly Instructions
Eternity Leg Corner Workstation without Screen
IMPORTANT NOTE:
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials. including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all completely assembled.
- Keep all hardware parts out of reach of children
Eternity Leg Corner Workstation With Screen
IMPORTANT NOTE:
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials, including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all completely assembled.
- Keep all hardware parts out of reach of children
IMPORTANT NOTE:
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials, including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all completely assembled.
- Keep all hardware parts out of reach of children
Eternity Leg Corner Workstation – 2-Person
IMPORTANT NOTE:
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials, including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all are completely assembled.
- Keep all hardware parts out of reach of children
Eternity Leg Corner Workstation – 4 Person
IMPORTANT NOTE:
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials,including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all completely assembled.
- Keep all hardware parts out of reach of children
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>