Ideal FURNITURE Deluxe Rapid Infinity 2 Person Single Sided Workstation Instruction Manual

Ideal FURNITURE Deluxe Rapid Infinity 2 Person Single Sided Workstation Instruction Manual

Time Required

25-35 minutes

Tools Required

• Screw driver
• Electric drill
• Pencil
• Measuring tape/Ruler

Skill Required

The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert.

For most products, two persons are recommended.

Please note, as this is a commercial product, some intermediate skills are required.

*No pre-drill holes or markings are provided on tops.

NOTE

• As this is a commercial product, some intermediate skills may be required.
• No pre-drill holes or markings are provided on our table or desk tops.
• Please check you have all hardware before assembling.
• If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
• Please retain your receipt as proof of purchase to validate your warranty.
• Assemble on a clean, at, smooth surface such as a rug or carpet to avoid parts from being scratched.
• Remove all wrapping materials, including staples and packing straps before you start to assemble
• Keep all hardware parts out of reach of children.

CAUTION

• Heavy product. Do not attempt to lift or move without help
• Do not tighten screws and bolts until completely assembled.
• Do not use this product unless all bolts and screws are rmly secured and tightened.

WARNING

• If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
• Failure to follow these warnings could result in serious injury

Assembly Instructions

Deluxe Infinity Loop Leg Single Workstation

MODEL NO: Loop Leg Single Sided Workstation – 1 person

Tools

STEP1

STEP2

STEP3

STEP4

IMPORTANT NOTE:

• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples & packing straps before you start to assemble.
• Don’t tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children

MODEL NO: Loop Leg Single Sided Workstation – 2 Person

Tools

Step 1

Step 2

Step 3

Step 4

MODEL NO: Loop Leg Single Sided Workstation – 3 person +

Tools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>