Ideal FURNITURE Loop Leg Single Sided Workstation With Screen Instruction Manual
- August 9, 2024
- Ideal FURNITURE
Table of Contents
Ideal FURNITURE Loop Leg Single Sided Workstation With Screen
Assembly Instructions
Time Required:
40-55 minutes
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler
*Tools are not included.
Skill Required
The Assembly Skill Rating is a 5-point system that shows the degree of effort
needed in assembling a specific product. With 1 being easy for the average
person and 5 requiring an expert.
For most products, two persons are recommended.
Please note, as this is a commercial product, some intermediate skills are
required.
*No pre-drill holes or markings are provided on tops.
NOTE
- As this is a commercial product, some intermediate skills may be required.
- No pre-drill holes or markings are provided on our table or desk tops.
- Please check you have all hardware before assembling.
- If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
- Please retain your receipt as proof of purchase to validate your warranty.
- Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
- Remove all wrapping materials, including staples and packing straps before you start to assemble
- Keep all hardware parts out of reach of children.
CAUTION
- Heavy product. Do not attempt to lift or move without help
- Do not tighten screws and bolts until completely assembled.
- Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING
- If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
- Failure to follow these warnings could result in serious injury.
MODEL NO:Loop Leg Single Sided Workstation With Screen
MODEL NO: Loop Leg Single Sided Workstation With Screen – 2 Person
MODEL NO: Loop Leg Single Sided Workstation With Screen – 3 Person
IMPORTANT NOTE
- Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
- Check to be sure that you have all parts and hardware.
- Remove all wrapping materials, including staples & packing straps before you start to assemble.
- Don’t tighten all screws/bolts until all completely assembled.
- Keep all hardware parts out of reach of children.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>