Sonos RAYG1US1 Compact Soundbar Owner’s Manual

: August 9, 2024
: Sonos

Table of Contents

Sonos RAYG1US1 Compact Soundbar
Product Usage Instructions
Overview
Connector panel
Select a location
Connect the cables
Product settings
Accessories
Wall mount
Set it up
Specifications
Important safety information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sonos RAYG1US1 Compact Soundbar

Specifications :

Compact soundbar
Quick and easy setup
Versatile design for various placement options
Stream music, radio, podcasts, etc.
Expandable for 5.1 surround sound
Control via Sonos app for Android and iOS

Product Usage Instructions

Select a Location :
You can choose to wall mount Ray above or below your TV, or place it in or on a TV stand. Follow the guidelines below:

TV Stand Placement:
- Place horizontally on a stable and level surface at least 2″ (50mm) from the TV.
- Avoid placing vertically or on its side.
- Do not block the TV’s IR sensor.
- If placed on a shelf, ensure at least 2″ clearance on both sides for optimal sound quality.
- Keep at least 1″ (25 mm) space above Ray to access touch controls easily.
- For best sound quality, keep both ends of Ray at least 1″ (25 mm) from a wall or obstruction.
- Ensure touch controls are facing up.
Wall Mount:
- Secure the soundbar to a wall using a compatible wall mount like Sonos Ray Wall Mount (sold separately).

Connect the Cables:

Connect the power cord and plug it into the soundbar. Use only the supplied power cord.
Remove the protective cap, then connect the included optical cable to the optical port on the back of your soundbar.
Remove the protective cap, then connect the optical cable to your TV’s optical digital OUT port. Ensure correct alignment to prevent damage.

Frequently Asked Questions (FAQ):

Q: Can I use a third-party power cord with Ray?
A: No, using a third-party power cord will void the warranty. Always use the supplied power cord.
Q: How do I adjust the volume on Ray?
A: You can control the volume by touching the designated areas on Ray for small adjustments or touch and hold to quickly change the volume. You can also adjust the volume using the Sonos app or your TV remote.
Q: Can I skip songs while listening to music?
A: Yes, you can swipe right across the touch controls to skip to the next song and swipe left to go back to the previous song. However, this feature is not available when listening to a radio station.

Ray

Overview

The compact soundbar for music, TV, and more—

Quick and easy setup, with only one cable to connect to your TV.
Great sound for compact spaces—versatile design allows you to set it on a credenza, mount it on a wall, or place it inside a TV stand.
Stream music, radio, podcasts, and more when the TV is off.
Expandable. Add a Sub and two Sonos speakers, like Ones, for 5.1 surround sound.
Control your Sonos system with the Sonos app (for Android and iOS).
See Setup when you’re ready to add Ray to your Sonos system.

Controls and lights

Volume control
Touch for small adjustments or touch and hold to quickly change the volume:
Volume up (right)
Volume down (left)
Note: You can also use the Sonos app or your TV remote.
Play/Pause
Touch to play or pause audio .
Next/Previous (music only)
- Swipe right across the touch controls to skip to the next song.
- Swipe left to go to the previous song.
- Note : You can’t skip forward or go back when listening to a radio station.
Status light
Displays the product’s connection to WiFi, indicates when the volume is muted, and signals errors. Learn more

Connector panel

Select a location

You can wall mount Ray above or below your TV, or place it in or on a TV stand.
TV stand placement

Place horizontally on a stable and level surface at least 2″ (50mm) from the TV.
Don’t place vertically or on its side.
Don’t block the TV’s IR sensor.
If put on a shelf, place at the front and keep 2″ (minimum) clearance on both sides for best sound quality.
Keep 1″ (25 mm) space (minimum) above Ray so you can reach the touch controls. For best sound quality, keep both ends of Ray at least 1″ (25 mm) from a wall or other obstruction.
Make sure the touch controls are facing up.

Wall mount
You can secure the soundbar to a wall with a compatible wall mount. We recommend the custom-designed Sonos Ray Wall Mount (sold separately). See Wall mount for more information.

Connect the cables

Before you start

Disconnect existing home theater or surround sound equipment from your TV.
Connect any external devices, like a cable box or DVD player, directly to your TV.
Turn your TV on.

Connect the power cord and plug in the soundbar.
Note: Use only the supplied power cord (using a third-party power cord will void your warranty).
Remove the protective cap, then connect the optical cable (included) to the optical port on the back of your soundbar.
Remove the protective cap, then connect the optical cable to your TV’s optical digital OUT port.
(The TV’s optical adapter’s port is “D-shaped”—make sure the connector aligns correctly into the port. Inserting the adapter incorrectly may damage the cable.)

Home theater

Sonos products for your TV provide full-theater sound and play music too. Create a home theater system by adding a pair of rear surrounds and a Sub.
Home theater settings
Use the Sonos app to adjust sound settings or change the way your home theater speaker works with your TV.

Set up surround speakers
It’s easy to turn two Sonos speakers (same model), or a Sonos Amp and your favorite non-Sonos speakers, into separate right and left channels for your home theater.

Place each surround speaker about 10 ft from your favorite listening position, angling them toward the seating area.
Go to > System.
Select a room with a soundbar and choose Add Surrounds to get started.

Note : If you group the rooms or create a stereo pair instead, you won’t have surround sound. Learn more
Surround audio settings
During setup, surround sound is optimized for your room. These settings are adjustable:

Trueplay™
Every room is different. Trueplay tuning measures how sound reflects off walls, furnishings, and other surfaces in a room, then fine tunes your Sonos speaker to make sure it sounds great no matter where you’ve placed it.
Trueplay works on iOS mobile devices running iOS 8 or later. During tuning, you’ll move around the room holding your mobile device.

Select > System, and pick the room you want to tune.
Choose Trueplay Tuning to get started.

Auto Trueplay
Portable Sonos products like Sonos Roam and Move can tune themselves automatically. Auto Trueplay uses your speaker’s microphone to detect the environment and make periodic tuning adjustments so you get great sound wherever your speaker is and whatever you’re listening to.
Go to > System, and select your portable speaker to turn on auto Trueplay.

Product settings

You can customize Sonos products for your surroundings. Go to > System and select a product.

Accessories

Find the perfect accessory for your Sonos system—tailored to perfectly fit your Sonos products.
For a full selection of Sonos-compatible stands, wall mounts, chargers and cables, see Accessories on our website.

Wall mount

Use the Ray wall mount kit (sold separately, available at sonos.com). It’s designed for mounting on a flat wall.

Guidelines

Leave enough space between Ray and your TV so you can reach Ray’s touch controls.
For best sound quality, keep both ends of Ray at least 1′ (30cm) from a wall or other obstruction.

Mount kit contents

Wall mount bracket
2 short attachment screws
2 wall anchors
2 wall screws

What you’ll need

Pencil
Phillips-head screwdriver
Power drill (if needed for installation location)
Measurement tool
Level
Stud finder (optional)

Set it up

If your TV is wall-mounted, align the top edge of the bracket with the bottom of your TV, leaving at least 2.5 inches (mm) between them.
Mark the screw locations and remove the bracket.
If you’re using wall anchors, use a 5/16″ drill bit to drill pilot holes, starting with the hole on the left. Then insert the wall anchors. Don’t use wall anchors if you’re drilling into wood or plastic. See Wall mounting information.
Position the wall mount bracket over the screw locations, using a level to confirm accuracy. Use a Phillips-head screwdriver or a power drill to screw the bracket to the wall, making sure the center notch is pointing up.
Using a Phillips head screwdriver, fasten the 2 attachment screws to the back of the soundbar, making sure they are fully tightened.
Remove the protective cap from the optical cable, then connect the power and optical cables to the back of the soundbar.
Slide the soundbar down so the attachment screws fit into the slots on the wall bracket.
Make sure the touch controls are facing up and Sonos Ray is fully seated.

Specifications

SOFTWARE

GENERAL

POWER & CONNECTIVITY

Specifications subject to change without notice.

Important safety information

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry soft cloth. Household cleaners or solvents can damage the finish on your Sonos products.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Protect the power cable from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
This product does not have any user-serviceable parts. Do not open or disassemble or attempt to repair it or replace any components. Refer all servicing to Sonos qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cable or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The Mains plug should be readily available to disconnect the equipment.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not expose apparatus to dripping or splashing and do not place objects filled with liquids, such as vases, on the apparatus.