MAOKAI M1 3 In 1 Magnetic Wireless Charger User Guide

MAOKAI M1 3 In 1 Magnetic Wireless Charger User Guide

Product Parameters

Product Features

1. [Strong Magnetic Absorption]
   Built-in premium magnet achienes an accurate alignment to the wireless charging sweet spot

2. [3 in 1 Wireless Charging Station]
   Can quickly charge both iPhone and Watch simultaneously, or charge AirPod separately

3. [Fast wirelss Charging]
   15W/10W/7.5W/5W for phone, 5W (max) for AirPods, 2.5W(max) for iWatch

4. [High-end Texture]
   Zinc alloy+glass material, combined with sun drying process, high-quality texture, beautiful and generous er1.

Attentions

1. Please use a qualified PD protocol or QC pratocol power charger, otherwise it may lead to unstable charge or abnormal blink.
2. If you use a protective shell, please use the mobile phone protection shell with Magsafe function.
3. Please do not use the mobile phone protection shell with a metal back or the mobile phone protection shell which thicker than 4mm.

Indication of indicator lights

Safety Instructions

1. Do not pull the power supply hard, to avoid the power cord break or fall off.
2. Do not disassemble the product or put it into fire or water to avoid short circuit and leakage.
3. Do not put metal debris or magnetic card on the product, it may cause damage to the product or abnormal charging.
4. Do not use the product in severe high temperature, humidity or corrosive environment, to avoid damage to the circuit and leakage phenomenon.

Warranty Card

Model:……………………………………………
Purchase date:…………………………………..
User:………………………………..
Purchase goods:…………………………………
Production batch:……………………………………….
Name:………………………………………..
Address:……………………………………..
Telephone:………………………………………………

Respected user:
Thank you for purchasing this product. In order to ensure that you get reliable after-sales service, please read the following Instructions carefully. The products guaranteed by this certificate are sold by our company or designated distributors For the producte registered in this certificate, the contents of this certificate must be lifted in truthfully, otherwise it will be regarded as an invalid three-pack certificate, which is registered in the product information The production batch number of the product must be consistent with the actual batch number of the guaranteed product. This certificate is the primary certificata of the three-guarantee service. Please keep it properly. When the customer needs technical support services, please show this certificate, and we will provide you as required Provide high- quality professional services.

The following situations do not belong to the scope of the three guarantees:

1. It is not possible to provide a valid three-quarantee certificate and a valid invoice (except to prove that the product is within the validity period of the three-quarantee) or change the Ihree-guarantee certificate without authorization.
2. The product model and preduction batch number on the “Three Guarantees cortificate do not match the actual product or there is no dealer’s seal.
3. Damage caused by failure to use, maintain, and keep in accordance with the requirements of the product instructions.
4. Failures caused by accidental disasters, sell-disassembly, man-made damage, or service repairs not authorized by our company.
5. No factory name, factory address, production date or no praduct certificate. 6. Damage caused by force majeure.

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for operating in conjunction with any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>