JinHua Q2 Intelligent Music Boxing Target User Manual
- August 7, 2024
- JinHua
Table of Contents
JinHua Q2 Intelligent Music Boxing Target
Product Information
Specifications :
- Compliance: Part 15 of FCC Rules
- RF Exposure: Meets general RF exposure requirements
- Usage: Portable exposure condition without restriction
Product Usage Instructions
Interference Correction Measures:
If interference occurs, try the following measures:
- Reorient or relocate the receiving antenna.
- Increase separation between equipment and receiver.
- Connect the equipment to a different circuit than the receiver.
- Consult the dealer or a radio/TV technician for assistance.
FCC Rules Compliance :
This device complies with Part 15 of FCC Rules. It should not cause harmful
interference and must accept any received interference.
Radiation Exposure :
The device meets general RF exposure requirements and can be used in portable
exposure conditions without restriction.
Frequently Asked Questions (FAQ):
-
Q: What should I do if the device causes interference to radio or television reception?
A: Try reorienting the antenna, increasing separation, using a different circuit, or seek assistance from a professional. -
Q: Is the device compliant with FCC rules?
A: Yes, this device complies with Part 15 of FCC Rules. -
Q: Can the device be used without restrictions in terms of radiation exposure?
A: Yes, the device can be used in portable exposure conditions without restrictions.
Intelligent Music Boxing Target
USER MANNUAL
Product Introduction
Instructions for use
- Keys (from left to right)
- Left: Speed gear adjustment/selection of light color
- Short press – speed gear cycle adjustment (random mode, practice mode)
- Long press and short press – select the color of the light (flowing light)
- Middle: Switch/Mode:
- Long press – turn on/off
- Short press – mode selection
- Random Mode -5 hit points appear randomly
- Practice mode -9 speed gears, manually adjustable in 1-9 gears
- Challenge Mode – Practice Mode Upgrade (Challenge), Automatic Upshift, Upshift with Encouragement Sound
- Bluetooth mode – Challenge mode Bluetooth version
- Right: Volume adjustment/background sound selection
- Short press – volume adjustment
- Long press and short press – background sound selection
Installation instructions
Installation method one
-
Tear open the fur Velcro (short Velcro)
- The sticker on the back,
- Directly attach to the back of the machine. When pasting, pay attention to the parallel direction of the machine.
Installation Method 2
-
Then apply the hook faced Velcro (long Velcro) Glue together with the machine’s rough surface, Find the location of the corresponding wall, Determine the position, tear off the back sticker, and use magic to create a long magic spell
- Simply fixit to the wall.
Troubleshooting
NOTES :
-
Please fix this product on a sturdy and reliable wall, and when striking, please strike within the striking area Striking is strictly prohibited in the comer areas to prevent hand injuries or equipment damage.
-
This product is suitable for adult use. Children should be guided to use it under adult supervision.
-
Beginners should not use excessive force to avoid hand injuries. Pay attention to the process of exercise first Safe, leg strikes and knee strikes are strictly prohibited.
-
It is strictly prohibited to hit the horn area.
-
The device cannot be turned on or has abnormalities. Please check if the battery is too low and charge it promptly,
The charging time should not exceed 8 hours, and it is recommended to charge once every 1-2 months when not in use for a longtime. -
This product is not waterproof. When wiping boxing targets, use a dry cloth and do not get wet.
-
Please keep the instruction manual properly for emergency use.
FCC Warning Statement
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
- If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.