MOULTRIE MOBILE Universal Feed Hub User Guide

August 7, 2024
MOULTRIE MOBILE

FEED HUB UNIVERSAL
QUICK START GUIDE

DOWNLOAD THE APP

To activate and install
FEED HUB UNIVERSAL ,download the Moultrie Mobile App.
Use your smartphone’s camera to scan the code below to download the app.
SCAN HERE TO DOWNLOAD
ACTIVE SUBSCRIPTION:

An active Moultrie Mobile subscription s required to use FEED HUB UNIVERSAL.

http://onelink.to/26gtes

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google Inc.
MOTOR BATTERY

  • Use a 6V or 12V, Lead Acid (SLAVAGM) Battery.
  • For best performance, use the Moultre 6V or 12V Rechargeable Batery.

AA BATTERIES

  • Do not mix battery types (Alkaline, Lithium).
  • Do not use rechargeable AR batteries for the Feed Level Detecor.
  • Use recommended A batteries (Moultrie Mobile Alkaline, Energizer Alkaline, o Energizer Lithium).

DISCLAIMER
‘Some feeder kits may require modification n order to replace the original timer with the FEED HUB UNIVERSAL Moultrie Mobile will not replace or ‘warranty feeders, feeder kits, or timers that are inoperable after wires have been cut.
Consumer takes fullliability of incorrect or faulty wiring

INSTALL FEED HUB UNIVARSEL

  1. Log in or sign up for a Moultrie Mobile account
  2. Add device
  3. Follow step-by-step, in-app instructions through activation and installation

https://me-qr.com/V8ccSpaA

OVERVIEW VIDEO
Scan the QR code to watch an overview of
FEED HUB’s UNIVERSAL
features and how it works.
YOU WILL NEED: EYE PROTECTION Additional tools you may need:
« Tape Measure for a custom feeder setup 4 AA BATTERIES Power Drill for installing external power (e.g. solar panel, battery box) Phillips Head #2 x 4” Screwdriver
BV or 12V if using Wildgame Innovations 6V MOTOR BATTERY — or Moultrie Ranch Series Auger
NOTE: This equipment has been tested and found to comply with the limits fora Class B digital device, pursuant to part 15 of the FCC Rules. These limits are. designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this ‘equipment does cause harmful interference to radio or television reception, which can be determined by tuming the equipment off and on, the useris encouraged o try to correct the interference by one or more of the following measures;
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Onnect the equipment into an outlet on a circuit different from that to which the receiver is connected
– Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for ‘compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) this device may not cause harmul interference, and (2) this device must accept any interference received, including interference that may cause undesired operation RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure imits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.
This device contains licence-exempt transmitter(s)receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s) Operation is subject to the following two contains:

  1. This device may ot cause interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.
    Radio Frequency Exposure Statement for IC
    This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimart distance 20cm between the radiator & body.

SETTINGS + MAINTENANCE

SIGN UP FOR NOTIFICATIONS
Go to Account > Notitions and opt into notifications for low feed levels, low battery levels, or a feeder clog/jam.
ADJUST SCHEDULES + FEED ON DEMAND
Use the app to view feed levels, battery levels, or adjust feed times from anywhere. Feed schedule changes will update at the next previously-scheduled feed time.
REPLACE BATTERIES + REFILL FEEDER
Sign up for notifications or check the app to see when your batteries or feed level is running low. After refilling feed, remove and reinstall a single AA battery to reset the Feed Level Detector. Then press TEST on the FEED HUB UNIVERSAL to run the feeder and see the updated feed level in app.
Note: FEED HUB UNIVERSAL does not work on gravity feeders. For more information and a list of compatible feeders, visit: MoultrieMobile.com/feedhub

NEED HELP?
For resources, troubleshooting, and support contact
our U.S.-based Customer Success team.
Support. MoultrieMobile.com
Customer Success: 1-844-908-1219

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals