MOULTRIE MOBILE MMF-15088FLD Feed Universal Hub User Guide
- July 26, 2024
- MOULTRIE MOBILE
Table of Contents
QUICK START GUIDE
DOWNLOAD THE APP
To activate and install
FEED HUB UNIVERSAL ,download the Moultrie Mobile App.
Use your smartphone’s camera to scan the code below to download the app.
ACTIVE SUBSCRIPTION:
An active Moultrie Mobile subscription is required to use FEED HUB UNIVERSAL.
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries.
App Store is a service mark of Apple Inc. Google Play is a trademark of Google
Inc.
MOTOR BATTERY
- Use a 6V or 12V, Lead Acid (SLA/AGM) Battery.
- For best performance, use the Moultrie 6V or 12V Rechargeable Battery.
AA BATTERIES
- Do not mix battery types (Alkaline, Lithium).
- Do not use rechargeable AA batteries for the Feed Level Detector.
- Use recommended AA batteries (Moultrie Mobile Alkaline, Energizer Alkaline, or Energizer Lithium).
DISCLAIMER
Some feeder kits may require modification in order to replace the original
timer with the FEED HUB UNIVERSAL .Moultrie Mobile will not replace or
warranty feeders, feeder kits, or timers that are inoperable after wires have
been cut.
Consumer takes full liability of incorrect or faulty wiring.
INSTALL FEED HUB UNIVERSAL
- Log in or sign up for a Moultrie Mobile account
- Add device
- Follow step-by-step, in-app instructions through activation and installation
OVERVIEW VIDEO
Scan the QR code to watch an overview of FEED HUB’s UNIVERSAL features and how
it works.
YOU WILL NEED:
| Additional tools you may need:
- Tape Measure for a custom feeder setup
---|---
| Power Drill for installing external power (e.g. solar panel, battery box)
| Phillips Head #2 x 4” Screwdriver if using Wildgame Innovations 6V or Moultrie Ranch Series Auger
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radio Frequency Exposure Statement for IC
This equipment complies with IC exposure limits set forth for an uncontrolled
environment. This equipment shall be installed and operated with minimum
distance 20cm between the radiator & body.
SETTINGS + MAINTENANCE
SIGN UP FOR NOTIFICATIONS
Go to Account > Notifications and opt into notifications for low feed levels,
low battery levels, or a feeder clog/jam.
ADJUST SCHEDULES + FEED ON DEMAND
Use the app to view feed levels, battery levels, or adjust feed times from
anywhere. Feed schedule changes will update at the next previously-scheduled
feed time.
REPLACE BATTERIES + REFILL FEEDER
Sign up for notifications or check the app to see when your batteries or feed
level is running low.
After refilling feed, remove and reinstall a single AA battery to reset the
Feed Level Detector. Then press TEST on the FEED HUB UNIVERSAL to run the
feeder and see the updated feed level in app.
Note: FEED HUB UNIVERSAL does not work on gravity feeders.
For more information and a list of compatible feeders, visit:
MoultrieMobile.com/feedhub
NEED HELP?
For resources, troubleshooting, and support contact our U.S.-based Customer
Success team.
Support.MoultrieMobile.com
Customer Success: 1-844-908-1219