anko USBH007 Target Australia User Manual

anko USBH007 Target Australia

Product Information

Specifications

• Model: USBH007
• 9 IN 1 TYPE C HUB
• USB-A Type-C port for data transmission only
• TYPE-C Charge Port High-speed USB-A Transfer Speed
• HDMI 1.4 4K 30Hz
• TF/SD Reader (Note: Both ports cannot be read at the same time)
• LAN port
• USB Transfer Speed: Up to 5Gbps
• LAN Port Speed: Up to 100 Mbps

Product Usage Instructions

• Ensure the USB hub is only connected to a Type-C port designated for data transmission.

Data Transfer

• Use the Type-C port specifically labeled for data transmission to transfer data effectively.

TF/SD Card Reader

• Note that only one card (either SD or TF) can be read at a time.
• If both cards are inserted, neither will be accessible. Remove both cards and re-insert one card into the slot.
• Avoid exposing the USB hub to moisture, rain, vibration, shock, dust, or sand. Do not connect the hub to a power supply.

FAQ

• What should I do if my product becomes defective within the warranty period?
• If your product is defective within the warranty period, contact the Customer Service Centre listed on your purchase receipt for a refund, repair, or exchange based on availability.
• Can I use both the SD and TF card slots simultaneously?
• No, only one card slot can be used at a time. Inserting both cards will make them inaccessible. Remove both cards and re-insert one card into the slot.

Quick Start Guide

TF/SD Reader

Note: Both ports cannot be read at the same time.

| Up to 480 Mbps
LAN port| Up to 100 Mbps

Caution
The USB hub is for data transmission only. Do not connect it to the power supply.

Instruction

• Connect the Type-C male connector of this product to a PC device that has a Type-C port.
• Connect the USB 3.0 /2.0 output of this product to a USB 3.0/2.0 device for data transmission.
• Connect the Type-C port of this product to a Type-C device.
• Please only choose the Type-C port featured with data transmission for transferring data.
• Insert the SD /TF card into the SD/TF port for reading the data.
• Note: This USB hub can read either SD or TF card at a time.
• If both SD and TF cards are inserted, two cards would be inaccessible. Kindly remove both cards and re-insert either card to the card slot again.
• Connect the HDMI port to the device for image or video transmission.
• Insert the LAN cable into the LAN port of this product.

Warning

• The Type-C hub is used for office equipment and information technology equipment.
• The max ambient temperature is 40 ℃.
• For indoor use only.
• Dropping the product or submitting it to impact can cause the product to malfunction.
• Do not place the product in an area exposed to heat, direct sunlight, dampness, moisture, rain, vibration, shock, dust, or sand.

Warranty

12-month warranty
Thank you for your purchase.
Your new product is warrantied to be free from defects in materials and workmanship for the period stated above, from the date of purchase, provided that the product is used per accompanying recommendations or instructions where provided. This warranty is in addition to your rights under the Australian Consumer Law. For New Zealand customers, this warranty is in addition to statutory rights observed under New Zealand legislation.
We will provide you with your choice of a refund, repair (where possible) or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer Service Centre as listed below, for the entity you purchased this product from, for any difficulties with your product. Warranty claims and claims for expense incurred returning this product can be addressed to the respective Customer Service Centre.

CONTACT

Contact for Kmart purchases

• Kmart Australia Ltd.
• C/- Customer Service Centre
• 690 Springvale Road,
• Mulgrave Vic 3170
• Customer Service: 1800 124 125
• (Australia) or 0800 945 995
• (New Zealand) or via
• Customer Help at kmart.com.au

Contact for Target purchases

• Target Australia Pty Ltd
• C/- Customer Service Centre
• 2 Kendall Street, Williams Landing, Vic, 3027
• Customer Service: 1300 753 567 or via Customer Help at target.com.au/help/contact-us

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>