Roku CS1000P25 Aspen Indoor Camera User Manual
- August 6, 2024
- Roku
Table of Contents
Roku CS1000P25 Aspen Indoor Camera
Product Information
The Roku Camera, known as the Product, requires a Roku account for activation. Please ensure to read and keep all safety and use instructions provided with the product. It is important to follow safety precautions to prevent fire, electrical shock, property damage, or personal injury.
Specifications:
- Product Name: Roku Camera
- Model Number: 4100000975_01
- Operating Frequency: 2.4 GHz band (limited to channels 1 through 11 in the US)
- Required for Activation: Roku Account
Safety Precautions:
Any electrical device, if used improperly, can pose risks. To ensure safe and
enjoyable operation, follow these guidelines:
- Refer to support.roku.com for product safety information and troubleshooting.
- There is no guarantee that interference will not occur in a specific installation.
- If interference is detected, take measures to correct it.
Product Usage Instructions
Activation:
To activate your Roku Camera, follow these steps:
- Ensure you have a Roku account.
- Power on the camera and connect it to your network.
- Access the Roku activation portal and follow the on-screen instructions to link your camera to your account.
Operation:
Once activated, use the Roku Camera as follows:
- Position the camera as desired for monitoring.
- Access the camera feed through your Roku account on a compatible device.
- Adjust settings and view the camera feed remotely.
FAQ (Frequently Asked Questions):
-
Q: Do I need a Roku account to use the Roku Camera?
A: Yes, a Roku account is required for activation and usage of the Roku Camera. -
Q: What should I do if I experience interference with my camera feed?
A: If you encounter interference, try repositioning the camera or adjusting your network settings. For further assistance, refer to support.roku.com.
A Roku account is required to activate your Product.
Safety Precautions
Important Product Information Safety Precautions
Any electrical device, if used improperly, has the potential to cause fire,
electrical shock, property damage, or personal injury. To help ensure
accident-free and enjoyable operation, follow these guidelines:
- Observe all warnings, precautions, and instructions.
- Regularly inspect all elements of the Product for damage.
- If the Product has been damaged, cracked, or punctured, or if the Product functions in an abnormal manner, produces unusual sounds, or smells, or becomes hot, immediately stop use, unplug any power adaptors or cables from the electrical outlet, and disconnect any other cables.
- Observe all signs and displays that require an electrical device or RF radio product to be switched off in designated areas.
For more information on product safety and troubleshooting, please go to support.roku.com.
Use and Handling
- The Product is not a toy. Product packaging may include plastic bags, mounting hardware, and fasteners.
- Dispose of these properly and keep them out of reach of children and pets, as they could present a choking hazard.
- Do not puncture, crush, or damage any element of the Product.
- Do not attempt to repair or disassemble your Product yourself. Doing so may cause injury, overheating, fire, or damage not covered by the Limited Warranty, or electric shock or injury to you.
- Do not expose any element of the Product to smoke, steam, high temperatures, high humidity, direct sunlight, or excessive low or freezing temperatures.
- Do not place any element of the Product on the floor or in a place where it may cause someone to trip or stumble.
- Do not place naked flame sources, such as lighted candles, on or near the Product.
- Do not drop or crush the Product.
- Do not clean with chemical cleaners. Use a soft, dry cloth.
- Do not place the product directly on oil or wax-based wood-finished surfaces.
- Dispose of the Product according to local standards and regulations.
FCC STATEMENT
FCC Caution:
Any changes or modifications not expressly approved by Roku, Inc. could void
the user’s authority to operate this equipment.
The 2.4 GHz band operation of this product in the US is firmware limited to channels 1 through 11.
Important note:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. The availability of some specific channels and/or
operational frequency bands are country-dependent and are firmware programmed
at the factory to match the intended destination. The firmware setting is not
accessible by the end user.
- Apple and App Store are trademarks of Apple Inc., registered in the U.S. and other countries and regions.
- Amazon, Alexa, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. Alexa Alexa-enabled device is required to work with Alexa.
- Google, Google Play, and Google Home are trademarks of Google LLC. A Google Assistant-enabled device is required.
- Third-party features and services may be subject to change or removal without notice.
Copyright © 2023 Roku, Inc. All rights reserved.
Additional Legal Notices
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used following the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.