Roku CF1000R Floodlight Camera SE User Manual

: June 3, 2024
: Roku

Table of Contents

Roku CF1000R Floodlight Camera SE
What’s included
Details
Let’s get started
Mounting options
FCC WARNING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Roku CF1000R Floodlight Camera SE

Roku-CF1000R-Floodlight-Camera-SE-PRO

What’s included

Roku-CF1000R-Floodlight-Camera-SE-1

A Roku Floodlight Camera SE
D Floodlight screw (bag C)
B Bracket screws #6, #8, #10 (x2) (bag A)
E Rubber stopper
G Wire nuts (x2)
C Ground wire screw (bag B)
F Mounting bracket
H Hook

What you’ll need:

Phillips screwdriver
Ladder
Your smartphone

Details

Speaker
Camera bracket lock
LED lamp
Camera
Status light
Microphone
Motion sensor
Micro USB port

Before you set up… Do you have a Junction Box?
If you aren’t replacing a current light fixture, you may not have the wiring setup you need.

WARNING Remember to disconnect power to your junction box using the fuse or circuit breaker.

If not, please contact a licensed electrician to install one, following your local building codes.

Let’s get started

STEP 1: Download the Roku Smart Home app
Scan the QR code below to download the Roku Smart Home app on your smartphone. Sign in with your Roku account or create one.
STEP 2: Install your floodlight
In the Roku Smart Home app, tap the “+” button, then “Add Device” to find “Floodlight Camera.” Follow the instructions to finish setup.

What’s that light mean?

Status Light	Status
RED – Solid	Powered on and beginning setup
RED – Flashing	Ready to connect
RED and BLUE – Flashing	Connecting to Wi-Fi®
BLUE – Flashing	Connected and finishing setup
BLUE – Solid	Connected and working

Mounting options

WALL MOUNT
CEILING MOUNT
CAMERA FIELD OF VIEW 130°
MOTION AREA FOR TRIGGERING THE LIGHTS 270°

Recommended location
We recommend installing your floodlight 10 feet above the ground. It will detect motion up to 30 feet away.

FCC WARNING

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

RF RADIATION EXPOSURE STATEMENT
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Suitable for commercial or civilian use.

More features are waiting
Unlock the full potential of your camera with a Roku Smart Home Subscription.
Learn more at: go.roku.com/rokusmarthome

Need help?

Visit go.roku.com/cameras