BLACKSPIDER BSH10 Wireless Headset User Manual

BLACKSPIDER BSH10 Wireless Headset

Specifications

• Product Model: BSH10 Wireless Headset
• Wireless Version: V5.3
• Charging Port : Type-C
• Charging Time: About 2 hours
• Playing Time : About 30 hours
• Charging Voltage: 5V 0.3A
• Support Protocol : HSP/HFP /A2DP/ AVRCP
• Communication Distance: 10 meters

FAQ

• The device cannot be found:
  • If the phone cannot search for the device, try turning off the headset and then turning it on again. Additionally, turn off Bluetooth on the mobile phone and then turn it on again before searching and pairing.
• The device is connected but there is no sound:
  • Adjust the volume of the headset and ensure that the volume on the headset is not set to the lowest level

Packing List

• BSH10 Wireless Headset
• Audio Cable
• Type-C Charging Cable
• Product Instruction
  Color Packing Box

Product Parameters

• Product Model : BSH10 Wireless Headset
• Wireless Version: V5.3
• Charging Port: Type-C
• Charging Time: About 2 hours
• Playing Time : About 30 hours
• Charging Voltage: 5V-0.3A
• Support Protocol : HSP/HFP /A2DP/ AVRCP
• Communication Distance: 10 meters

One Click Control

1. Short press to increase the volume, and long press for the next song.

2. Play/Pause, Answer/Hang up

3. Short press to reduce the volume, long press for the Previous song

4. Type-C charge port

5. Type-C charge port

6. AUX audio port

7. Bluetooth indicator

8. Mic port

9. Long press turn on or turn off, Short Press, Turn on/off LOGO light

New Smart Headset Series
Compatible with iOS and Android, smartphone/tablet, and other electronic products with bluetooth function.

Operating Instructions

1. 1.  **Wireless bluetooth connection**  

   Press and hold the power button for 3~5 seconds. When the red ed bin and is the dee Rashes iS 10 he connects Bluetooth. successful connection, the blue light flashes slowly.

2. Switch on and off

3. Press and hold the power button for 3 seconds. When the blue light flashes, the device will automatically pair and connect.

4. Press and hold the power button for 3-5 seconds to shut down.

Charging

Use the Type-C charging cable to connect to the device. When the charging is in process, the middle indicator light will remain red and will switch off when the battery is fully charged.

Wired Mode

To use the wired mode, turn off the bluetooth mode and perform shutdown operations. Plug in and connect the 3.5mm audio cable. The headset button and microphone cannot be used in this state.

Buttons Description

(when music is playing)

| Play/pause| Mobile Phone
Play Button| Short press

(when a call comes in)

| Answer/hang up| Mobile Phone
Playing Button| Long press for 3 seconds (when a call comes in)| Reject the phone| Mobile Phone
V-Key| Short press

(when music is playing)

| Volume increase| Mobile Phone
V+Key| Short press

(when music is playing)

| Volume decrease| Mobile Phone
V-Key| Long press

(when music is playing)

| Next song| Mobile Phone
V-Key| Long press

(when music is playing)

| Previous song| Mobile Phone

Common Problems

1. The device cannot be found If the phone cannot search for the device, try to turn off the headset and then turn it on again. Additionally, try to turn off the bluetooth on the mobile phone and then turn it on again. The search and pairing are performed again.
2. The device is connected but there is no sound Adjust the volume of the headset. Check if the volume on the headset is adjusted to the lowest.
3. There is no sound from the headset when the audio cable is plugged in Remove and plug the audio cable back into the headset device.

Please pay attention to the following signals when using the headset

• The distance between the headset and the mobile phone should not exceed 10-20 meters. There should not be too many interfering obstacles to avoid the problem of a broken link and it being stuck in the transmission of the bluetooth signal.
• In the process of daily use, it is normal to have occasional disconnection problems. After all, bluetooth belongs to wireless signal transmission, much like a Wi-Fi network. Occasional instability is a normal phenomenon. The signal transmission may be interfered with by some environments. Please wait for a moment or change the position.
• It is very important to avoid the problem of sound insulation, sound leakage, and wearing method of headset. In order to avoid, the sponge part of the earphone bag is not completely closed in the ear/head, you can timely adjust the wearing angle and ear covering degree of the earphone according to the comfort of actual use.
• When you wear the headphones and adjust them to the maximum volume, some audio leakage is normal. If you want a more private soundproof environment, it is recommended to lower the volume to the normal condition and adjust the wearing angle to the best condition

References

• BlackSpider – Manufacturers of Blackspider products

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>