anko DIY Candle Kit Totem Instruction Manual
- August 8, 2024
- Anko
Table of Contents
anko DIY Candle Kit Totem Instruction Manual
DIY Candle Kit Totem
Instruction Manual
WHAT’S IN THE BOX
- Silicone mold x 1
- 80g soy wax x 1
- 80g beeswax x 1
- Wooden candle wick holder x 1
- Wooden muddler x 1
- Metal needle x 1
- Disposable gloves x 2
- 50cm length of candle wick x 1
EXTRA ITEMS YOUR WILL NEED
- Plastic sheets to protect your work surface
- A stovetop and heat safe dish or saucepan to heat the wax
- Scissors
CREATING A TOTEM CANDLE
Makes 1 Totem Candle
Tips:
Read through instructions before starting.
- Take out the metal needle, thread the candle wick through the end of the metal needle, then use the tip of the needle to penetrate the center of the base of the silicone mould. Please reserve 5-10cm of the candle wick at each end of the silicone mould. (Fig. 1-3)
- Thread the candle wick which is positioned at the top of the silicone mould through the middle of the supplied wooden candle wick holder. Ensure that you place it tightly in the middle of the silicone mould (Fig. 4)
- Put on the supplied disposable gloves and begin making your candle.
- Pour soy wax and beeswax in a heated dish at a ratio of 11 and stir with the wooden muddler. Heat mixture until completely melted. (Fig, 5-6)
- After ensuring there are no bubbles present in the wax liquid (Note: you con use a thermometer to measure the temperature of the wax liquid, which needs to be heated to 70-80 degrees Celsius.) pour into the mould slowly. (Fig. 7-8)
- When the wax liquid is about to reach the top of the silicone mould, ensure that you leave a gap of 1-2mm between the liquid and the candle wick holder to avoid uneven modeling. (Fig. 9).
- Wait 4-5 hours until the wax has completely hardened, remove the candle wick holder. then gently peel back the silicone mould to reveal your candle. Cut any excess wick. (Fig. 10-12)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>