Taiwan Secom OPC-003C Card Reader Instruction Manual
- June 12, 2024
- Taiwan Secom
Table of Contents
Taiwan Secom OPC-003C Card Reader
Product Information
Product Name: OPC-003C Card Reader
Manufacturer: Taiwan Secom Co., Ltd.
Technical Manual Version: V1.0
System Description
The OPC-003C is a Mifare NFC reader that can operate in three modes: Independent mode, Terminal mode, and Lift control mode.
- Independent mode: In this mode, the reader can function on its own for access control. It allows card identification, door opening, and access reader storage without the need for an access controller. This helps reduce the overall access system cost.
- Terminal mode: The reader can be used for card reading only. It needs to be connected to an access controller via RS-485.
- Lift control mode: The reader can connect to an I/O module (CTM-0080) via RS-485 for lift control. User information, including lift floors access rights, can be added. It can control up to 50 floors.
The reader supports the following NFC card data types:
ISO14443-A, ISO15693, ISO14443-B, and Felica. It can manage card number data
separated into two parts: system code and user code. The system code data
length ranges from 3 to 7 bytes, and the user code data length ranges from 7
to 10 bytes, depending on user requirements.
Function Description
- Chinese/English LCD: The reader has a 4-row x 16-column LCD for displaying messages in English and a 4-row x 8-column LCD for displaying messages in Chinese. It can display information such as company name, date, card number, operation messages, and attendance status.
- LED Indicator: The reader has a blue LED that is always lit when powered on. It flashes once for normal card access and flashes red for three times to indicate abnormal card access. The red and blue LEDs flash interchangeably to indicate card system alerts, such as communication errors or reader dismantling.
- Buzzer: The reader has a buzzer that provides an indication for card access and keypad presses.
- Keypad: The reader has 16 press buttons for password input and attendance status change. The keypad also has backlighting for enhanced visibility.
- RS-485: The reader has two pairs of RS-485 communication wires. One pair is used for connection to the access controller, and the other pair is used for connection to the I/O module (CTM-0080) in lift control mode.
- RTC (Real-Time Clock): The reader has an RTC with a battery, allowing it to be set via an access server.
- EEPROM: The reader has an EEPROM for storin system parameters.
- SRAM: The reader has SRAM for storing card numbers, access records, and system parameters.
- FLASH: The reader has FLASH memory for data backup of card numbers, access records, and temporary storage of firmware during updates.
- Card Data: The reader can store up to 20,000 records for card information. This includes the card number, password, valid datetime, and zone for door and lift access.
- Access Record: The reader can store up to 20,000 access records.
- Alarm Record: The reader can store up to 2,000 alarm records.
- Time Zone Group for Door: The reader supports one group of up to 24 time zones for door access. The time zone group can be associated with a specified door to define access rights.
System Description
Introduction
OPC-003C is a Mifare NFC reader， it can be running with 3 modes: Independ mode、terminal mode、lift control.
- Independent mode：The reader is capitable with controller functions to connect to Acess Server directly, running without access controller. All of access related data include the user information、access parameters can be stored withing the reader. It can be worked along without server connection for access operation. The access record s will upload to Server once server connection establish. The Access Server also be able to query the access related data without acess controller. The reader is capitable with operation with its own keypad for parameters and access records inqury.
- Terminal mode： The reader be card reading function only. In this mode, it has to connect to access controller via RS-485.
- Life control mode： The reader is able to connect to I/O module (CTM-0080) via RS-485 for lift control. User information can be added with the lift floors access right information. It can control up to 50 floors.
Regarding the card management, card unmber data is sepreated with 2 parts, system code and user code, system code data length is 3 up to 7 bytes, and user code data length 7 to 10 bytes, up to user reqirement. The reader support following NFC card data type: ISO14443-A、ISO15693、ISO14443-B Felica。
Since the reader is able running independent with access controller for access control, like the card idenfication、door open、acess reader storage. The access system cost will decrease cost.
Function description
-
Chinese/English LCD
English Message: 4 row x 16 column
Chinese Message: 4 row x 8 column
For Company Name、Date、Card Number、Operation Message、Attendance Status etc., -
LED Indicator:
Blue LED Always lighting: power on Blue LED Flash one time: card access normal
Red LED Flash for 3 times: card access in normal
Red & Blue LED Flash interchange: card system alert(ex. communication error、reader dismantle) -
Buzzer: for card access and keypad press indication
-
Keypad: <0> ~ <9>， <>， 16 press button for password and attendance status change
-
Keypad with backlight
-
RS-485: there are 2 pair of RS-485 communication wires, one is for the access controller and the other for the CTM-0080 device connection or lift controller module
-
RJ45: Network communication to connect to access server for data exchange
-
Dismantle detection: Reader will deliver the alarm event once dismantle detected
-
NFC module: contain with MIFARE NFC module
-
Support NFC card data type: ISO14443-A MIFARE® family include DESFire EV1/EV2、 ISO15693、ISO14443-B 與 Felica
-
RTC： RTC with battery, it allows to set via access server
-
EPROM: for reader system parameters storage
-
SRAM: for card numbers、access records、system parameters storage.
-
FLASH: data backup for card numbers、access records and firmware temporary storage during the updating
-
Card data: up to 20,000 records for card information, it include the card number、 password、vaild date、time zone for door and lift access.
-
Access record: up to 20,000 record
-
Alarm record: up to 2,000 record
-
Time zone group for door: one group up to 24 time zone, and time zone group can be set related to a specified door to define the access right
-
Time zone group for card holder: one group up to 64 time zone, and time zone group can be set related to the cardholder to define the access right
-
Holiday Group: support 3 holiday group definitions, each up to 60 holidays. The access right can be enabled or disabled during the holiday
-
Music time zone: support 3 music time zone groups, there are 36 music time zone definitions. Each Digital Output can be specified for music active. Each music time active period is 1~99 seconds.
-
DI detective mode: Reader support 3 Digital Input channel, there are 8 types of DI detective mode In normal input Normal lock active Fire alert trigger
Taiwan Secom Page 6 / 14
Security system enable/disable
Security system innormal
Push button active
Door sensor
Report input -
DO action mode: Reader support 3 Digital Output channel, there are 20 type of DO
related active mode
Door open
Door close
Illeag card access
Communication error
Reader dismantle detective
Door open forcing
Door close over time limit
Anti-duress
External innormal input
Door lock
Manual trigger
Any kind of innormal alert
Invalid card access
Card access during control time
Music active
Card access and “1” button pressed
Card access and “2” button pressed
Card access and “3” button pressed
Card access and “4” button pressed
Reader case open/close -
24. Support anti-duress operation: Press “9”+Enter before card access or password input
Reader outline
Reader Outlook
System outline description
LED Indicator:
- Blue LED Always lighting: power on
- Blue LED Flash one time: card access normal
- Red LED Flash for 3 times: card access innormal
- Red & Blue LED Flash interchange: card system alert (ex. communication error、reader dismantle)
LCD display：
- Display message include with following information
- Company name
- User Name
- Access Date/Time
- Attendance Status
- Error message
Keypad：
- Normal operation：
- 0~9 key： for password input, password length is 4 to 7 digital，press for enter。
- C key： cancel key-in data。
- key： for password key-in enter。
- F1~F4 key：for attendance status selection。
- C + 111：to display current reader ID。
- C + 880：reset reader。
- C + 888：for LCD with Chinese or English character display。
- C + 000：Date/Time display。
- C + 999：Reader MAC address display。
- C + 222：Reader Firmware version information display。
- C + 333：Communication status display。
- C + 444：Display reader configuration screen。
- C + 555：Display access record re-send screen。
- C + 666：Display reader current access mode。
- Menu operation
- 0~9：Select function or data input。
- C：cancel or return the last page。
- ：enter to next page or confirm the data input。
- F1~F4：direction for up/down/right/left。
Reader connector description
- CN4：5Pin for Power and RS-485 interface
| Label| Wire Color| Description
---|---|---|---
1| +12| Red| PWR +12V
2| G| Black| PWR –
3| L+| Blue| RS485 L+
4| L-| White| RS485 L-
5| G| Brown| Float GND - CN2 ：8P Digital Input/Output**
| Label| Wire Color| Description
---|---|---|---
1| RL1N| | RELAY 1
2| RL1C| | RELAY 1 COM
3| RL2N| | RELAY 2
4| RL2C| | RELAY 2 COM
5| RL2N| | RELAY 3
6| RL2C| | RELAY 3 COM
7| SW1| | DI 1
8| SW2| | DI 2
9| SW3| | DI 3
10| G| | GND** - CN8 ：3P RS-485 for CTM-0080 device connection or lift controller module**
| Label| Wire color| Description
---|---|---|---
1| DL+| | RS485 L+
2| DL-| | RS485 L-
3| G| | GND** - DIP SW
- DIP SW 1~2：(reserve)
- DIP SW 3：reboot machine when the network is disconnected for 24 hours (ON： Enable， OFF： Disable)。
- DIP SW 4：testing mode(for manufacture testing)。
- DIP SW 5：for supervisor card access，turn SW 5 on and access supervisor card for two times
Reader Hardware Specification
- Outlook
- case material： Silver gray ABS resin
- operation environment： temperature -10~45℃ humunity 20%~90%
- size: 15.4 ㎝(long)，10.6 ㎝(wide)，3.0 ㎝(height)
- wieght: 250g
- water proof：IP53
Electronic Specification：
- input power : DC 12V (10V~15V)
- Maximum current consumption：
System Description
system architecture
-
Architecture for independ reader contain with controller function
The reader and the PC are connected through the network, and the PC can set the parameter and record inqury to reader, and the reader will upload the status by yourself, ex. card access status or abnormal status. If the the network disconnected, the reader is still can work independly.
-
Architecture for reader only
The card reader connect with access controller, and all parameters or commands are communicate through by the access controller. If card reader disconnected with controller, then the reader will be able judge reader access right by itself. Once the reader re-connect with controller, it will send all of .
-
External Access Reader:
Card reader is capable to connect to extermal wiegand reader via CTM-0080. All of access records by external reader will send back to PC through card reader .
-
Lift Control：Card reader is able to control lift floor button via lift controller determine by card access right.
Function Description
Card Access：
Card data format：
Mifare Classic card, 14 digital numbers. It separate as two parts, one is
System Code, and the other is user ID.
System Code: It can be set as 4~7 digital numbers. It can be treated as
company ID.
User ID: For personal use. It can be set as 7-10 digital numbers.
If the reader set as for Mifare serial number acess, there are 10 digital
numbers, and the System Code has to be set as “0001”.
The default card type is: 14 sector, it can be reconfiged as user need.
OPC-003C support new card type: DESFire v2 card.
- If reader config to read card serial number, it will be able access following card type:
- ISO14443-A
- ISO15693
- ISO14443-B
- Felica
- If reader connect to the CTM-0080 convertor，it will be able connect with the Wiegand & ABA reader。
- Card access judge mode as following:
- Card only。
- Password + Card 。
- System Code only。
- Always Open。
- Always Close。
- Card or Password。
- Finger Print。
- DI related DO reactive。
- Card + Password。
- Serial Access mode with card only。(only for 24 time sections)
- Anti-Passback control mode。(only for 24 time sections)
- Serial Access mode with Password + card。(only for 24 time sections)
- Card Access once。(only for 24 time sections)
- Reader support 8 system code and up to 20,000 card data。
Display and Buzzer：
- Access status：
- Authorize Card Access：Blue LED flash one time。
- Unauthorize Card Access：Buzzer one tone for 3 seconds，Red LED flash 3 times, each time for 0.5 second。
- Status description：
Controller response| Buzzer| LED
---|---|---
1. Authorize Card Access| silence| Blue LED flash 1
time
2. Unauthorize Card
Access
|
Buzzer one tone for 3 seconds
|
Red LED flash 3 times, each time for
0.5 second
§ Password Error
§ Expire Date
§ Unregister Card
§ System Code Error
§ Denied Mode
3. Control period|
Buzzer one tone for 3 seconds
|
Red LED flash 3 times, each time for
0.5 second
4. Case Open Alert| |
2. Attendance Status Display：
- User is able to setting the Attendance Status up to 3 Chinese characters for reader display by Access Manager Software。
- Manual Attendance Status setting：
- F 1 press 1 time –“On Duty”， F1 press 2 times –“Lunch Break Start”。
- F 2 press 1 time –“Off Duty”，F 2 press 2 times –“Lunch Break End”。
- F 3 press 1 time –“Overtime Start”， F 3 press 2 times –“Go Out”。
- F 4 press 1 time –“Overtime End”， F 4 press 2 times –“Come Back”。
- Display will turn back be normal state after 10 seconds。
-
External Reader：It supports external reader via Wiegand/ABA for card access。
Card data format： Support HID 26/35/34/56 Bit Wiegand reader and YOKEEM 14/10 ABA format reader。 -
Firmware Information：It will show the firmware information during the reader bootup for 5 seconds.
Data Communication：
- Upload Data：Reader will upload the access records to access system software via network.It also can send records via RS-485 through acces controller。
- System code register：It can be set by accessing system software via network, or manual operate via reader keypad。
- Anti-Coercion：
- Card acces mode： Press ’9’+ first, then card access, the reader will send the Anti-Coercion to access system software。
- Card + Password acces mode： Press the user’s password, then card access。
- Card or Password acces mode：
- Keyin password then +‘9’ + door will open and the reader will send the Anti-Coercion to access system software。
- Press’9’+ ‘Enter’, then access card, door will open and the reader will send the Anti-Coercion to access system software。。
- If user press password and do nothing then, after 10 seconds, reader will go back to stand by mode。
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>